Need help with overclocking RAM

[TastyGuava]

So I'm overclocking my ram and managed to get it at 1.35v with 3600mhz although it's a 4x8 32GB 2993 micron b die kit Corsair vengeance and am trying to tighten the timings, when I tighten them do I bring the number down one at a time and keep doing it til I get a boot error or? And I moved from the first number that I could change because I got boot error and I started getting power cycles but it would still boot perfectly fine. I'm not very experienced with memory tuning until getting into it recently.

[boggy77]

use ryzen dram calculator. it's a free tool that should give you recommended values for timings for your configuration

[TastyGuava]

28 minutes ago, boggy77 said:

use ryzen dram calculator. it's a free tool that should give you recommended values for timings for your configuration

it doesn't support my configuration

[Haro]

2 hours ago, TastyGuava said:

it doesn't support my configuration

usually for timing for e.g ( and this isnt 100% correct but should be enough) 

a cl15 2666 ram is kind of the same as a cl14 2400 

so what i recommend is to down the cl latency by one until you get a BSOD then if you want lower latency you can lower it by one more then down clock your frequencies to 3466 and you should be fine