DOCP not working

[Mmmmhhhhhhhh]

When I turned on docp my memory computer booted in safe mode at 2133 MHz. When I used a memory tester that used xmp it showed it running at 3600 MHz. Is there any way to use xmp on my asus x570 F gaming.

[Jurrunio]

Try lower frequency, like 3466MHz

[jctappel67]

DOCP is just Asus's word for XMP. A quick fix might be to swap the RAM sticks into the opposite slot they're in rn. 2 to 4 and vice versa.

[Guest]

my neck hurts

 

[Mmmmhhhhhhhh]

5 hours ago, Jurrunio said:

Try lower frequency, like 3466MHz

I can get it to run at 3400mhz but nothing higher

 

[Jurrunio]

1 minute ago, Mmmmhhhhhhhh said:

I can get it to run at 3400mhz but nothing higher

 

so that's how fast it will go. No guarantees for overclocking like this

[Mmmmhhhhhhhh]

9 hours ago, Jurrunio said:

so that's how fast it will go. No guarantees for overclocking like this

Alright, thank you for your input.

[jhawk2122]

I don't know what hardware you're running, but I had a similar issue with my ASUS B450-I mITX motherboard, 3600 CL16 ram, and a Ryzen 5 3600.  

 

To get DOCP to work, I had to increase the DRAM voltage to 1.4, manually set the FLCK to 1,800, and increase the SoC voltage to 1.05.  

 

Note, though, that I have not stress tested my memory (don't have a usb key right now).