Jump to content

PC randomly shuts down mid-boot up after changing CPU

Hi,

 

So I'm trying to build a 'rig' out of old/unused part I scavenged. I managed to get a working PC using this (1) motherboard (Gigabyte GA-945GCM-S2C) with this (2) pre-installed CPU (Intel Celeron Processor 430).

I wanted to upgrade this rig to make it a bit faster so I added more ram (which worked fine), then I replaced the CPU with an Intel Pentium 805 SL8ZH (the same one as this (3)). However, we I use this CPU, the PC would shut down mid-boot up (sometimes even seconds after powering it on).

I'm guessing my PSU is fine since it worked with the Celeron. Nonetheless, I still tried switching power outlets and PSU; disconnecting all non-essential components; cleaning all the connections; and applied new thermal paste. But still the problem remains.

Does this mean that the Pentium CPU is defective or is there another issue I've overlooked?

 

EDIT: I think that it's worth mentioning that the CPU is very hot by touch even if it was powered on for only a few seconds. Perhaps a cooling issue?

 

(1) https://www.gigabyte.com/Motherboard/GA-945GCM-S2C-rev-10#ov 

(2) https://ark.intel.com/content/www/us/en/ark/products/29735/intel-celeron-processor-430-512k-cache-1-80-ghz-800-mhz-fsb.html 

(3)https://www.ebay.ie/itm/Intel-Pentium-D-805-LGA-775-CPU-Processor-2-66GHz-2MB-Cache-2C-533MHz-FSB-SL8ZH-/323812818489

Link to comment
Share on other sites

Link to post
Share on other sites

It might be cooling since it turns off after a few seconds and is very hot to touch... the cpu might have reached its limit temp and forcefully shutted the system doen to avoid meltdown..

Link to comment
Share on other sites

Link to post
Share on other sites

Two things, clear the CMOS, update the BIOS and try to get a better cooling solution... the pentium D is known to be a nuclear power plant, it was known to run HOT (it's basically two prescott pentium 4 cpus)

Main PC [The Rig of Theseus]:

CPU: i5-8600K @ 5.0 GHz | GPU: GTX 1660 | RAM: 16 GB DDR4 3000 MHz | Case: Lian Li PC-O11 Dynamic | PSU: Corsair RM 650i | SSD: Corsair MP510 480 GB |  HDD: 2x 6 TB WD Red| Motherboard: Gigabyte Z390 Aorus Pro | OS: Windows 11 Pro for Workstations

 

Secondary PC [Why did I bother]:

CPU: AMD Athlon 3000G | GPU: Vega 3 iGPU | RAM: 8 GB DDR4 3000 MHz | Case: Corsair 88R | PSU: Corsair VS 650 | SSD: WD Green M.2 SATA 120 GB | Motherboard: MSI A320M-A PRO MAX | OS: Windows 11 Pro for Workstations

 

Server [Solution in search of a problem]:

Model: HP DL360e Gen8 | CPU: 1x Xeon E5-2430L v1 | RAM: 12 GB DDR3 1066 MHz | SSD: Kingston A400 120 GB | OS: VMware ESXi 7

 

Server 2 electric boogaloo [A waste of electricity]:

Model: intel NUC NUC5CPYH | CPU: Celeron N3050 | RAM: 2GB DDR3L 1600 MHz | SSD: Kingston UV400 120 GB | OS: Debian Bullseye

 

Laptop:

Model: ThinkBook 14 Gen 2 AMD | CPU: Ryzen 7 4700U | RAM: 16 GB DDR4 3200 MHz | OS: Windows 11 Pro

 

Photography:

 

Cameras:

Full Frame digital: Sony α7

APS-C digital: Sony α100

Medium Format Film: Kodak Junior SIX-20

35mm Film:

 

Lenses:

Sony SAL-1870 18-70mm ƒ/3.5-5.6 

Sony SAL-75300 75-300mm ƒ/4.5-5.6

Meike MK-50mm ƒ/1.7

 

PSA: No, I didn't waste all that money on computers, (except the main one) my server cost $40, the intel NUC was my old PC (although then it had 8GB of ram, I gave the bigger stick of ram to a person who really needed it), my laptop is used and the second PC is really cheap.

I like tinkering with computers and have a personal hatred towards phones and everything they represent (I daily drive an iPhone 7, or a 6, depends on which one works that day)

Link to comment
Share on other sites

Link to post
Share on other sites

What cooler is installed?

 

Also the mobo may not be capable of delivering enough power to that hungry for the time chip.

 

 

F@H
Desktop: i9-13900K, ASUS Z790-E, 64GB DDR5-6000 CL36, RTX3080, 2TB MP600 Pro XT, 2TB SX8200Pro, 2x16TB Ironwolf RAID0, Corsair HX1200, Antec Vortex 360 AIO, Thermaltake Versa H25 TG, Samsung 4K curved 49" TV, 23" secondary, Mountain Everest Max

Mobile SFF rig: i9-9900K, Noctua NH-L9i, Asrock Z390 Phantom ITX-AC, 32GB, GTX1070, 2x1TB SX8200Pro RAID0, 2x5TB 2.5" HDD RAID0, Athena 500W Flex (Noctua fan), Custom 4.7l 3D printed case

 

Asus Zenbook UM325UA, Ryzen 7 5700u, 16GB, 1TB, OLED

 

GPD Win 2

Link to comment
Share on other sites

Link to post
Share on other sites

So the cooler I was using was an old, second-hand cooler manufactured by some local company. Probably not good enough for the Pentium. I'll try finding a better one.

Link to comment
Share on other sites

Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

×