Jump to content

Problems with dual channel

ArnauPg
 Share
Posted

Hello there.

I've been having some problems. I've got a msi z97 gaming 7 and 2 ddr3 kingston hyperx 8Gb each. The problem is that in single channel that memory is slowing my computer a lot, and when i follow the instructons of the motherboard, puting on the slots 0-2 or 1-3 the computer isn't booting at all. I've looked at the bios but i don't know what to do anymore to make the dual channel work!. (I put some photos to see if it helps you)

Thks for your help

cbbeb1bb-ba16-4b5c-bef0-edd487c8e521.jfif b2f68009-cfe3-4fe2-8d43-bd690d0ad6fe.jfif 7c2572a7-d38e-41d0-8a9f-a9dc56a5e63d.jfif

Link to comment
Share on other sites
Link to post
Share on other sites
Posted

Place sticks in dual channel config, then clear CMOS.

CPU: i7-2600K 4751MHz 1.44V (software) --> 1.47V at the back of the socket Motherboard: Asrock Z77 Extreme4 (BCLK: 103.3MHz) CPU Cooler: Noctua NH-D15 RAM: Adata XPG 2x8GB DDR3 (XMP: 2133MHz 10-11-11-30 CR2, custom: 2203MHz 10-11-10-26 CR1 tRFC:230 tREFI:14000) GPU: Asus GTX 1070 Dual (Super Jetstream vbios, +70(2025-2088MHz)/+400(8.8Gbps)) SSD: Samsung 840 Pro 256GB (main boot drive), Transcend SSD370 128GB PSU: Seasonic X-660 80+ Gold Case: Antec P110 Silent, 5 intakes 1 exhaust Monitor: AOC G2460PF 1080p 144Hz (150Hz max w/ DP, 121Hz max w/ HDMI) TN panel Keyboard: Logitech G610 Orion (Cherry MX Blue) with SteelSeries Apex M260 keycaps Mouse: BenQ Zowie FK1

 

Model: HP Omen 17 17-an110ca CPU: i7-8750H (0.125V core & cache, 50mV SA undervolt) GPU: GTX 1060 6GB Mobile (+80/+450, 1650MHz~1750MHz 0.78V~0.85V) RAM: 8+8GB DDR4-2400 18-17-17-39 2T Storage: HP EX920 1TB PCIe x4 M.2 SSD + Crucial MX500 1TB 2.5" SATA SSD, 128GB Toshiba PCIe x2 M.2 SSD (KBG30ZMV128G) gone cooking externally, 1TB Seagate 7200RPM 2.5" HDD (ST1000LM049-2GH172) left outside Monitor: 1080p 126Hz IPS G-sync

 

Desktop benching:

Cinebench R15 Single thread:168 Multi-thread: 833 

SuperPi (v1.5 from Techpowerup, PI value output) 16K: 0.100s 1M: 8.255s 32M: 7m 45.93s

Link to comment
Share on other sites
Link to post
Share on other sites
Posted
  • Author

I did what u said but the pc is now trying to boot and reset over and over

Link to comment
Share on other sites
Link to post
Share on other sites
Posted
  • Author
1 hour ago, Jurrunio said:

Place sticks in dual channel config, then clear CMOS.

Still nothing on the screen, i dont know what to do anymore, its trying to boot over and over 

Link to comment
Share on other sites
Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing CPUs, Motherboards, and Memory

×