Jump to content

Technical Information H700

C0D33X
 Share
Posted

Hello everyone,

 

I begin a project to make a distro plate to fit in my case (NZXT H700). For that I search a plan or another thing with all dimension of the case (screw center distance, screw thread diameter, and other) but I don't find this information.

Anyone have an idea where I can find this ?

 

C0D33X,

Link to comment
https://linustechtips.com/topic/1154755-technical-information-h700/
Share on other sites
Link to post
Share on other sites
Posted
6 hours ago, C0D33X said:

I begin a project to make a distro plate to fit in my case (NZXT H700). For that I search a plan or another thing with all dimension of the case (screw center distance, screw thread diameter, and other) but I don't find this information.

Where are you planning on mounting this distro plate? If it's in a normal "radiator" location (top or front) you could simply use radiator dimensions, screw threads and distance as a template for your plate.

"Put as much effort into your question as you'd expect someone to give in an answer"- @Princess Luna

Make sure to Quote posts or tag the person with @[username] so they know you responded to them!

 RGB Build Post 2019 --- Rainbow 🦆 2020 --- Velka 5 V2.0 Build 2021

Purple Build Post ---  Blue Build Post --- Blue Build Post 2018 --- Project ITNOS

CPU AMD R7 7800X3D    Motherboard Asrock B650E Taichi Lite    RAM Corsair Vengeance RGB 32GB 5200mhz    GPU ASUS RTX4080 STRIX 

Case Fractal Torrent   Storage Samsung 980Pro 2TB, Crucial P3 Plus 4TB x2,     PSU Corsair RM1000x    Cooling Deepcool AK620

Link to post
Share on other sites
Posted
  • Author

I'm planning to mounting the distroplate on the bottom of the case (indicate on the image), remove the red part. I think I can remove some screw who fix the cable management duct, who are just behind. And put a mounting plate on the distro plate to fix this.

 

Sorry for my english, not so good I think

1932570-n14.jpg

Link to post
Share on other sites
Posted
1 hour ago, C0D33X said:

I'm planning to mounting the distroplate on the bottom of the case (indicate on the image), remove the red part. I think I can remove some screw who fix the cable management duct, who are just behind. And put a mounting plate on the distro plate to fix this.

 

Sorry for my english, not so good I think

I see. Yes those screws will remove the Cable management pieces on the back side, which would allow you to mount something on this side. That's a good idea! Unfortunately, I do not know of any resources that tell you where the screw holes are located :( your best bet is to contact NZXT directly at: https://www.nzxt.com/contacts/new

"Put as much effort into your question as you'd expect someone to give in an answer"- @Princess Luna

Make sure to Quote posts or tag the person with @[username] so they know you responded to them!

 RGB Build Post 2019 --- Rainbow 🦆 2020 --- Velka 5 V2.0 Build 2021

Purple Build Post ---  Blue Build Post --- Blue Build Post 2018 --- Project ITNOS

CPU AMD R7 7800X3D    Motherboard Asrock B650E Taichi Lite    RAM Corsair Vengeance RGB 32GB 5200mhz    GPU ASUS RTX4080 STRIX 

Case Fractal Torrent   Storage Samsung 980Pro 2TB, Crucial P3 Plus 4TB x2,     PSU Corsair RM1000x    Cooling Deepcool AK620

Link to post
Share on other sites
Posted
  • Author

Yes I also think the best option to find this info is to contact NZXT directly :/ 

 

But also just remove 3-4 screws of the cable duct (for not broke the all thing) and make a mounting plate screwed on the distroplate might be an idea. 

 

I keep feeding the thread with my advancement. 

 

And the more simple solution are mounting on the front and remove front fans... ?

Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing Cases and Mods

×