Running this software called agisoft

[Lyle Patrick]

agisoft run.CSV

 

 

i need help with regards to my set up or xmp profile.

 

the rig is thermal throttling. is this okay?

 

also, I used the gigabyte easy tune. used the auto overclock feature and enabled the xmp profile 1 for the ram.

 

I use a g. skill trident z 32 gb dual 3600

and 1tb m.2 adata xpg sx8200

 

I have 7 fans in my case. 4 for exhaust (3 radiator, 1 just for exhaust) and 3 intake.

 

I have opened the side due to thermal throttling. 

 

open to suggestions on bios setting or better hardware changes.

 

THANKS!

 

 

Edited February 3, 2020 by Lyle Patrick

[Husky]

It is not OK for the rig to be thermal throttling, not with that cooling at least.

 

You should avoid using automatic overclocking utilities. Manual overclocking is the way to go for the best performance with the best temperatures since automatic overclocking utilities usually add unneeded extra voltage.

 

You should reset your BIOS to defaults and then apply the XMP profile and test the temperatures. You can then watch some manual overclocking guides to overclock your system if you want to or if you are comfortable to do so.

 

One last thing, you could maybe rearrange your case fans so that you have either an equal amount of intake and exhaust fans or 1 more intake than exhaust as neutral/positive case pressure is better than negative case pressure - especially when it comes to dust build-up.