Fan Problem

[Nod Narb]

I got 9 rgb fans to put inside my case but my motherboard only has 3 4-pins available. I am looking a solution that isn't a Commander Pro.

 

Any suggestions: (affordable terminals/connectors) 

[skimmilk5]

If you don't mind your fans running at full speed (12v), you can find plenty of Molex to 12v fan connectors on Amazon, and that won't destroy your motherboard's fan circuitry.

If you don't mind getting your hands dirty, you can find the pinout of Molex and SATA, and you can get those connectors fairly cheaply from the clearance section of your local Microcenter. Simply snip the wires, and use a soldering iron to put some new fan connectors on, maybe even two or three per Molex connector.

[LogicalDrm]

You can use splitters. 3x 3-way splitters for fan control/power. Most RGB fans are way less than 0.33A anyway.