Cpu temp sensor broken?

[JoeyThePixelGuy]

Hi,

 

I have a problem i think, i cant see my temp anywhere on any software except Speccy. but i dont trust speccy because the temps are so high, or it is the broken sensor?

 

I have custom water cooling (photos down below) and i tested with 2 other coolers and its stays the same. 

 

i wanted to edit my video, but i also want to check the temps when i am rendering, because its satisfying. (i dont know why but yes)

 

My screen turns black after 10 - 20 minutes of rendering, i dont know what the cause of that is, maybe overheating? i get error code 8 on the motherboard LED when my screen turns black and the pc does nothing, but pc is still on.

 

I still have warranty on the CPU.

 

Need more info? just ask no problem. 

 

Specs: 

 

CPU: AMD Ryzen 7 1800X

GPU: NVIDIA GeForce GTX 1080 msi

MOBO:  Asus ROG CROSSHAIR VI EXTREME

RAM: 16.0GB DDR4 3000Mhz

PSU: 1000W cooler master 

 

Computer is on idle in the picture below. When rendering it shoots up to the 90s or higher.

[Mick Naughty]

Real temp and asus suite. No reason to trust any of them really. 

May wonna check the flow with all those parts and tubing. 

[Guest]

 

[JoeyThePixelGuy]

Just now, Mick Naughty said:

Real temp and asus suite. No reason to trust any of them really. 

May wonna check the flow with all those parts and tubing. 

the flow of the water is good, it flows the good direction. i had the same problems with a air cooler and a different water cooler

[TrigrH]

use hwinfo

[JoeyThePixelGuy]

1 minute ago, TrigrH said:

use hwinfo

ok, ill test that and let you know more later

[minibois]

Personally I would always trust Ryzen master, if you were still looking for temperature monitoring options.

Are you on the latest BIOS?

[JoeyThePixelGuy]

1 minute ago, minibois said:

Personally I would always trust Ryzen master, if you were still looking for temperature monitoring options.

Are you on the latest BIOS?

as i can see no i have 1 year old bios and the latest is 2 weeks ago

[JoeyThePixelGuy]

7 minutes ago, TrigrH said:

use hwinfo

i dont see any temps from the cpu in the sensor part only HDD mobo and gpu

[Mira Yurizaki]

The Ryzen 1800X can report a temperature of +20C higher than it is (https://techreport.com/forums/viewtopic.php?t=119426) Some monitoring tools know about this, others don't.

 

Also Speccy shouldn't be used as a monitoring tool since it's not meant to be one.

[TrigrH]

1 minute ago, JoeyThePixelGuy said:

i dont see any temps from the cpu in the sensor part only HDD mobo and gpu

update the bios to latest, and get a new pump there is no way your pump has enough power to push through 4 rads with good enough flow rate. also every radiator should have a fan on it.

[minibois]

4 minutes ago, JoeyThePixelGuy said:

as i can see no i have 1 year old bios and the latest is 2 weeks ago

This post is quite a while ago, but someone experienced the same Q-Code, which a BIOS update fixed.

https://rog.asus.com/forum/showthread.php?91842-Asus-Crosshair-VI-Hero-Q-Code-8-Not-Starting

Of course it's very possible you're at a (much) newer BIOS at this point, but it still might be worth it.

 

But I would still check the temps with either Ryzen master or HWInfo64.

[JoeyThePixelGuy]

22 minutes ago, TrigrH said:

update the bios to latest, and get a new pump there is no way your pump has enough power to push through 4 rads with good enough flow rate. also every radiator should have a fan on it.

i updated the bios to the latest now, and yes maybe i need a new pump, it was a cheap one from aliexpress

[TrigrH]

2 hours ago, JoeyThePixelGuy said:

i updated the bios to the latest now, and yes maybe i need a new pump, it was a cheap one from aliexpress

screen shots of hw info?