Jump to content

I would do AIO on the front intake, and either 1 or 2 exhaust on the top, and exhaust at the back.

 

you generally want to avoid intakes up high, as hot air rises, and you want your airflow you have a general direction of flow (I.e. in front and out top/back, you want to avoid intakes at front and back of the case, or top and bottom, etc)

Gaming Build:

CPU: Ryzen 7 3800x   |  GPU: Asus ROG STRIX 2080 SUPER Advanced (2115Mhz Core | 9251Mhz Memory) |  Motherboard: Asus X570 TUF GAMING-PLUS  |  RAM: G.Skill Ripjaws DDR4 3600MHz 16GB  |  PSU: Corsair RM850x  |  Storage: 1TB ADATA XPG SX8200 Pro, 250GB Samsung 840 Evo, 500GB Samsung 840 Evo  |  Cooler: Corsair H115i Pro XT  |  Case: Lian Li PC-O11

 

Peripherals:

Monitor: LG 34GK950F  |  Sound: Sennheiser HD 598  |  Mic: Blue Yeti  |  Keyboard: Corsair K95 RGB Platinum  |  Mouse: Logitech G502

 

Laptop:

Asus ROG Zephryus G15

Ryzen 7 4800HS, GTX1660Ti, 16GB DDR4 3200Mhz, 512GB nVME, 144hz

 

NAS:

QNAP TS-451

6TB Ironwolf Pro

 

 

Link to comment
https://linustechtips.com/topic/1141405-fan-and-flow-need-help/#findComment-13183178
Share on other sites

Link to post
Share on other sites

3 minutes ago, Statik said:

I would do AIO on the front intake, and either 1 or 2 exhaust on the top, and exhaust at the back.

 

you generally want to avoid intakes up high, as hot air rises, and you want your airflow you have a general direction of flow (I.e. in front and out top/back, you want to avoid intakes at front and back of the case, or top and bottom, etc)

so if i do  1 exhaust fan on the top and back

 i would have one spot free correct?

 

Link to comment
https://linustechtips.com/topic/1141405-fan-and-flow-need-help/#findComment-13183194
Share on other sites

Link to post
Share on other sites

5 minutes ago, _d0nut said:

what i'd do is run area 3 as intake and areas 1 and 2 as exhaust, but run areas 1 and 2 at a slower speed than area 3 to prevent negative air pressure which introduces more dust

if i have the fans as intake on my aio wouldn't it push hot air into my pc?

 

Link to comment
https://linustechtips.com/topic/1141405-fan-and-flow-need-help/#findComment-13183198
Share on other sites

Link to post
Share on other sites

Just now, LightDragon1023 said:

so if i do  1 exhaust fan on the top and back

 i would have one spot free correct?

 

Yes. You could always do like said above, 2 at the front, 1 back, 2 top, but run the exhaust slightly slower so you don’t get negative air pressur

Gaming Build:

CPU: Ryzen 7 3800x   |  GPU: Asus ROG STRIX 2080 SUPER Advanced (2115Mhz Core | 9251Mhz Memory) |  Motherboard: Asus X570 TUF GAMING-PLUS  |  RAM: G.Skill Ripjaws DDR4 3600MHz 16GB  |  PSU: Corsair RM850x  |  Storage: 1TB ADATA XPG SX8200 Pro, 250GB Samsung 840 Evo, 500GB Samsung 840 Evo  |  Cooler: Corsair H115i Pro XT  |  Case: Lian Li PC-O11

 

Peripherals:

Monitor: LG 34GK950F  |  Sound: Sennheiser HD 598  |  Mic: Blue Yeti  |  Keyboard: Corsair K95 RGB Platinum  |  Mouse: Logitech G502

 

Laptop:

Asus ROG Zephryus G15

Ryzen 7 4800HS, GTX1660Ti, 16GB DDR4 3200Mhz, 512GB nVME, 144hz

 

NAS:

QNAP TS-451

6TB Ironwolf Pro

 

 

Link to comment
https://linustechtips.com/topic/1141405-fan-and-flow-need-help/#findComment-13183200
Share on other sites

Link to post
Share on other sites

2 minutes ago, Statik said:

Yes. You could always do like said above, 2 at the front, 1 back, 2 top, but run the exhaust slightly slower so you don’t get negative air pressur

ok i will do so. if i have the fans as intake on my aio wouldn't it push hot air into my pc?

Link to comment
https://linustechtips.com/topic/1141405-fan-and-flow-need-help/#findComment-13183207
Share on other sites

Link to post
Share on other sites

35 minutes ago, LightDragon1023 said:

ok i will do so. if i have the fans as intake on my aio wouldn't it push hot air into my pc?

Not really, sure the air will be a little warmer, but AIOs dissipate heat well, they don’t throw much warmth at all. 

Gaming Build:

CPU: Ryzen 7 3800x   |  GPU: Asus ROG STRIX 2080 SUPER Advanced (2115Mhz Core | 9251Mhz Memory) |  Motherboard: Asus X570 TUF GAMING-PLUS  |  RAM: G.Skill Ripjaws DDR4 3600MHz 16GB  |  PSU: Corsair RM850x  |  Storage: 1TB ADATA XPG SX8200 Pro, 250GB Samsung 840 Evo, 500GB Samsung 840 Evo  |  Cooler: Corsair H115i Pro XT  |  Case: Lian Li PC-O11

 

Peripherals:

Monitor: LG 34GK950F  |  Sound: Sennheiser HD 598  |  Mic: Blue Yeti  |  Keyboard: Corsair K95 RGB Platinum  |  Mouse: Logitech G502

 

Laptop:

Asus ROG Zephryus G15

Ryzen 7 4800HS, GTX1660Ti, 16GB DDR4 3200Mhz, 512GB nVME, 144hz

 

NAS:

QNAP TS-451

6TB Ironwolf Pro

 

 

Link to comment
https://linustechtips.com/topic/1141405-fan-and-flow-need-help/#findComment-13183304
Share on other sites

Link to post
Share on other sites

Just now, Statik said:

Not really, sure the air will be a little warmer, but AIOs dissipate heat well, they don’t throw much warmth at all. 

All the heat in the AIO goes back into the case.

 

It's spread out more, yes. But it still all goes into the case.

Link to comment
https://linustechtips.com/topic/1141405-fan-and-flow-need-help/#findComment-13183311
Share on other sites

Link to post
Share on other sites

2 minutes ago, LightDragon1023 said:

cpu or gpu?

 

If you mount the AIO to the front, being intake... all the CPU heat will be put into the case making the GPU a few degrees hotter.  

 

If you run the AIO on top as exhaust, it takes the warmed air from the GPU/system and can't cool the radiator for the CPU as well.  A few degrees hotter the CPU will be.

 

It's a choice you need to make.  I run mine as exhaust on top as I want my GPU to be as cool as possible in my setup.  Until I water cool it, that is.

Link to comment
https://linustechtips.com/topic/1141405-fan-and-flow-need-help/#findComment-13183342
Share on other sites

Link to post
Share on other sites

1 minute ago, Lorant said:

If you mount the AIO to the front, being intake... all the CPU heat will be put into the case making the GPU a few degrees hotter.  

 

If you run the AIO on top as exhaust, it takes the warmed air from the GPU/system and can't cool the radiator for the CPU as well.  A few degrees hotter the CPU will be.

 

It's a choice you need to make.  I run mine as exhaust on top as I want my GPU to be as cool as possible in my setup.  Until I water cool it, that is.

i have a 2070super that reaches around 80 degrees C under full load. while my cpu reaches between 80 and 100 degrees c under full load. but i think that because i have a horrible heatsink 

Link to comment
https://linustechtips.com/topic/1141405-fan-and-flow-need-help/#findComment-13183352
Share on other sites

Link to post
Share on other sites

3 minutes ago, LightDragon1023 said:

i have a 2070super that reaches around 80 degrees C under full load. while my cpu reaches between 80 and 100 degrees c under full load. but i think that because i have a horrible heatsink 

yes, it sounds like a bad heatsinnk (or mounting) on your CPU.  Hitting 100c is some badness.

Link to comment
https://linustechtips.com/topic/1141405-fan-and-flow-need-help/#findComment-13183360
Share on other sites

Link to post
Share on other sites

Just now, LightDragon1023 said:

yeah. what temps should i be expecting with an aio? i having either a corsair h100i platinum or a h115i platinum

I stress test AIDA64 at 84-86c on the CPU.  That's as hot as she gets. 8700k at 5GHz.

 

What CPU are you using?  a 240mm AIO should be fine, but a nice air cooler may work better.  AIO's really only surpass air at 360mm+ for the most part.

 

Plus the Dark Rock Pro 4 is sleek and sexy.

Link to comment
https://linustechtips.com/topic/1141405-fan-and-flow-need-help/#findComment-13183375
Share on other sites

Link to post
Share on other sites

1 minute ago, Lorant said:

I stress test AIDA64 at 84-86c on the CPU.  That's as hot as she gets. 8700k at 5GHz.

 

What CPU are you using?  a 240mm AIO should be fine, but a nice air cooler may work better.  AIO's really only surpass air at 360mm+ for the most part.

 

Plus the Dark Rock Pro 4 is sleek and sexy.

im using a i7 9700k

 and i dont have enough clearance for the dark pro 4

Link to comment
https://linustechtips.com/topic/1141405-fan-and-flow-need-help/#findComment-13183378
Share on other sites

Link to post
Share on other sites

3 minutes ago, LightDragon1023 said:

yeah. what temps should i be expecting with an aio? i having either a corsair h100i platinum or a h115i platinum

 

Rad is best to be exhaust when ever possible, u dont want heated air pushed into ur case especially if u still have a GPU running air cooling.

 

The issue running front as exhaust is that generally front is filtered and other areas are not, top is sometimes filtered.

 

You ideal want intakes filtered and exhaust not filtered. Filters restrict airflow so u only want them where necessary.

 

With the corsair spec-06  being restricted at the front due to the panel design i would have the front as intake with no rad, and move ur AIO to the top and have that as exhaust.

 

So,

3x 140mm Front intake (filtered)

2x 120mm Top Exhaust with AIO (remove dust filter)

1x 120mm Rear exhaust

CPU: Intel i7 3930k w/OC & EK Supremacy EVO Block | Motherboard: Asus P9x79 Pro  | RAM: G.Skill 4x4 1866 CL9 | PSU: Seasonic Platinum 1000w Corsair RM 750w Gold (2021)|

VDU: Panasonic 42" Plasma | GPU: Gigabyte 1080ti Gaming OC & Barrow Block (RIP)...GTX 980ti | Sound: Asus Xonar D2X - Z5500 -FiiO X3K DAP/DAC - ATH-M50S | Case: Phantek Enthoo Primo White |

Storage: Samsung 850 Pro 1TB SSD + WD Blue 1TB SSD | Cooling: XSPC D5 Photon 270 Res & Pump | 2x XSPC AX240 White Rads | NexXxos Monsta 80x240 Rad P/P | NF-A12x25 fans |

Link to comment
https://linustechtips.com/topic/1141405-fan-and-flow-need-help/#findComment-13183386
Share on other sites

Link to post
Share on other sites

 

3 minutes ago, SolarNova said:

 

Rad is best to be exhaust when ever possible, u dont want heated air pushed into ur case especially if u still have a GPU running air cooling.

 

The issue running front as exhaust is that generally front is filtered and other areas are not, top is sometimes filtered.

 

You ideal want intakes filtered and exhaust not filtered. Filters restrict airflow so u only want them where necessary.

 

With the corsair spec-06  being restricted at the front due to the panel design i would have the front as intake with no rad, and move ur AIO to the top and have that as exhaust.

 

So,

3x 140mm Front intake (filtered)

2x 120mm Top Exhaust with AIO (remove dust filter)

1x 120mm Rear exhaust

ok i will do so. what will be the temps i should be suspecting?

 

Link to comment
https://linustechtips.com/topic/1141405-fan-and-flow-need-help/#findComment-13183398
Share on other sites

Link to post
Share on other sites

1 minute ago, LightDragon1023 said:

 

ok i will do so. what will be the temps i should be suspecting?

 

Specifically , i couldnt say but a 240mm AIO is almost as good as a top of the line aircooler like the D15 and DRP4. So while i cant say exactly, temps should be well within acceptable levels and should allow for some OC'ing if wanted.

CPU: Intel i7 3930k w/OC & EK Supremacy EVO Block | Motherboard: Asus P9x79 Pro  | RAM: G.Skill 4x4 1866 CL9 | PSU: Seasonic Platinum 1000w Corsair RM 750w Gold (2021)|

VDU: Panasonic 42" Plasma | GPU: Gigabyte 1080ti Gaming OC & Barrow Block (RIP)...GTX 980ti | Sound: Asus Xonar D2X - Z5500 -FiiO X3K DAP/DAC - ATH-M50S | Case: Phantek Enthoo Primo White |

Storage: Samsung 850 Pro 1TB SSD + WD Blue 1TB SSD | Cooling: XSPC D5 Photon 270 Res & Pump | 2x XSPC AX240 White Rads | NexXxos Monsta 80x240 Rad P/P | NF-A12x25 fans |

Link to comment
https://linustechtips.com/topic/1141405-fan-and-flow-need-help/#findComment-13183410
Share on other sites

Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

×