Jump to content

Help troubleshooting new PC

Phillip_VSA
By Phillip_VSA
in Troubleshooting
 Share
Posted
I have a problem with a new pc I am building.
 
Compenents:
AMD R5 3600 (Cpu)
AMD Sapphire Pulse Radeon RX 5700 XT (Gpu)
Asus prime B450-plus (Motherboard)
Meshify C (Case)
Corsair Vengeance DDR4 3000 MHz (2x 8Gb) (Ram)
Corsair RM750 x (psu)
2x 1 Tb HDD
240 Gb SSD
 
Problem:
When I turn it on the fans start spining and the motherbord and graphics card lights up. there is no power to the USB's and no signal to display port and hdmi.
 
What we have tried:
We have tried booting without ram and with an other ram kit (from a working pc).
We have tried switching graphics card to a gtx 1060, and we have switched cpu with a AMD 2600.
We have replaced the motherbord to an other one of the same model.
 
Any form of help would be greatly appreciated
Link to comment
https://linustechtips.com/topic/1136839-help-troubleshooting-new-pc/
Share on other sites
Link to post
Share on other sites
Posted

That motherboard has aura sync.  I know nothing about aura synch other than it occasionally causes problems with some things.

 

does the motherboard have a light system for debugging?  Many do.  If this is the case your manual may have suggestions.

Not a pro, not even very good.  I’m just old and have time currently.  Assuming I know a lot about computers can be a mistake.

 

Life is like a bowl of chocolates: there are all these little crinkly paper cups everywhere.

Link to post
Share on other sites
Posted

Your motherboard is last generation, it needs a BIOS update.

Specs: Motherboard: Asus X470-PLUS TUF gaming (Yes I know it's poor but I wasn't informed) RAM: Corsair VENGEANCE® LPX DDR4 3200Mhz CL16-18-18-36 2x8GB

            CPU: Ryzen 9 5900X          Case: Antec P8     PSU: Corsair RM850x                        Cooler: Antec K240 with two Noctura Industrial PPC 3000 PWM

            Drives: Samsung 970 EVO plus 250GB, Micron 1100 2TB, Seagate ST4000DM000/1F2168 GPU: EVGA RTX 2080 ti Black edition

Link to post
Share on other sites
Posted
1 hour ago, Phillip_VSA said:

We have tried switching graphics card to a gtx 1060, and we have switched cpu with a AMD 2600.

The 2600 should work, with a graphics card of course

I WILL find your ITX build thread, and I WILL recommend the SIlverstone Sugo SG13B

 

Primary PC:

i7 8086k - EVGA Z370 Classified K - G.Skill Trident Z RGB - WD SN750 - Jedi Order Titan Xp - Hyper 212 Black (with RGB Riing flair) - EVGA G3 650W - dual booting Windows 11 and Fedora Linux - Black and green theme, Razer brainwashed me.

Draws 400 watts under max load, for reference.

 

PSU tier list

How many watts do I need?

PSU misconceptions, protections explained, group reg is bad

Link to post
Share on other sites
Posted
  • Author
17 hours ago, Bombastinator said:

That motherboard has aura sync.  I know nothing about aura synch other than it occasionally causes problems with some things.

 

does the motherboard have a light system for debugging?  Many do.  If this is the case your manual may have suggestions.

No the motherboard does not have a debugLED

Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing Troubleshooting

×