New PC Stuck in Boot Loop

[ZUMEX]

Hi Guys,

 

I just built my first PC. After I finished building it I tried to boot it into the bios but I am stuck in a boot loop and my monitor gets no signal. The PC turns on for about 20 seconds and then switches off for 3 seconds and repeats. Most people say that I should pop my CMOS out and put it back in, but this would only reset the bios. My parts are brand new and since I never actually managed to get into the bios and hence never changed anything I hardly believe that a bios reset will help. Do you have any help on how to fix this? 

 

My Parts are:

 

AMD Ryzen 5 2600 3.4 GHz 6-Core Processor

ARCTIC Freezer 34 eSports DUO CPU Cooler

ASRock B450M PRO4 Micro ATX AM4 Motherboard

Corsair Vengeance LPX 16 GB (2 x 8 GB) DDR4-3000 Memory

Zotac GeForce GTX 1650 SUPER 4 GB Twin Fan Video Card

Crucial BX500 480 GB 2.5" Solid State Drive

Cooler Master MasterBox Q300L MicroATX Mini Tower Case

Corsair CXM 550 W 80+ Bronze Certified Semi-modular ATX Power Supply

ARCTIC P14 Silent 29.8 CFM 140 mm Fan

ARCTIC P14 Silent 29.8 CFM 140 mm Fan

[SavageNeo]

Wait for 15+ minutes. My pc does this wjen ram is set to XMP with 1.35V it has to be 1.410V.... After 15 minutes it should go to bios setup

[boggy77]

i'd still try to reset the bios

[ZUMEX]

Just now, SavageNeo said:

Wait for 15+ minutes. My pc does this wjen ram is set to XMP with 1.35V it has to be 1.410V.... After 15 minutes it should go to bios setup

Do I need to be pressing the delete key to boot into bios the whole time or do I just switch on the monitor and the PC and leave it running and ignore that the monitor is getting no signal?

[ZUMEX]

Just now, boggy77 said:

i'd still try to reset the bios

Alright, I'll do it anyways.

[boggy77]

also make sure you have the monitor connected to the graphics card, not to the motherboard

[ZUMEX]

1 minute ago, boggy77 said:

also make sure you have the monitor connected to the graphics card, not to the motherboard

yeah, I did that. I used an hdmi cable. Should I try DVI? What worries me most is the boot loop though

[191x7]

Recheck every connection, make sure you've connected everything properly!

[Juular]

Sounds like your GPU are DOA.

[ZUMEX]

1 minute ago, Juular said:

Sounds like your GPU are DOA.

the fans on the GPU spin though and I tried plugging my monitor into the hdmi port on the motherboard and it still did not work.

 

[Juular]

Try running just one RAM stick (both of them separately).

[ZUMEX]

1 hour ago, SavageNeo said:

Wait for 15+ minutes. My pc does this wjen ram is set to XMP with 1.35V it has to be 1.410V.... After 15 minutes it should go to bios setup

I tried leaving it in the boot loop for 15 minutes, but nothing changed.

[ZUMEX]

2 hours ago, Juular said:

Try running just one RAM stick (both of them separately).

Thanks! I got it to work with one ram stick, do I need to update the bios or something to make it work with both?

[Juular]

4 minutes ago, ZUMEX said:

Thanks! I got it to work with one ram stick, do I need to update the bios or something to make it work with both?

If it works with one stick but not with another then RMA this kit, if it works with both sticks plugged one at the time then RMA motherboard. Try different slots\slot pairs too.