Help my system keeps dying

[GamerForFun]

I just installed my new rtx 2080S and two 8GB corsair vengeance 3600Mhz sticks. I went into the bios and changed the ram speed to 3600Mhz and the dram voltage to 1.35V. In the process I tried to change the cpu core voltage, it was at something like 1.4V or something (I have an 9900k) but when I tried to change it it went to 0.915V and even if I change it back to auto it still stays at that voltage. When I boot the system normally now it recognizes the 2080S but then it just turns off. Any ideas?

[Radium_Angel]

3 minutes ago, GamerForFun said:

Any ideas?

Yeah, reset everything to default (BIOS reset via jumpers) and see if it behaves.

If it does, then leave it alone and be happy.

If it doesn't, report back

[Juular]

That's standby voltage hence the name, you need CPU Core\Cache voltage.

[GamerForFun]

I did a return to default in bios settings and everything went fine, my ram is back at 2666Mhz and its base voltage. My cpu voltage was at the same so maybe it was the ram acting up? Is it worth to keep trying to get 3600 or is it fine with 2666?

[Radium_Angel]

1 minute ago, GamerForFun said:

Is it worth to keep trying to get 3600 or is it fine with 2666?

Personally? I'd choose stability over performance any day of the week