Getting lower fps than expected

[Excepsi]

So I have been getting lower fps on games. Like on CSGO im getting 150 fps on low settings same with league of Legends. My current build is a Ryzen 2600x x470 gigabye ultra gaming mother board 16gb 3000mhz  of ram and a rtx 2060. If any one could help I would appreciate it.

[SavageNeo]

10 minutes ago, Excepsi said:

So I have been getting lower fps on games. Like on CSGO im getting 150 fps on low settings same with league of Legends. My current build is a Ryzen 2600x x470 gigabye ultra gaming mother board 16gb 3000mhz  of ram and a rtx 2060. If any one could help I would appreciate it.

Your signature says that you only have 2400mhz ram, which is pretty bad for ryzen. Do you have one or two sticks?

I mean 150 fps is not that bad.

[Excepsi]

Just now, SavageNeo said:

Your signature says that you only have 2400mhz ram, which is pretty bad for ryzen. Do you have one or two sticks?

I mean 150 fps is not that bad.

I overclocked my ram to 3000mhz and yes I have 2 sticks

 

[Excepsi]

Just now, SavageNeo said:

Your signature says that you only have 2400mhz ram, which is pretty bad for ryzen. Do you have one or two sticks?

I mean 150 fps is not that bad.

It is not bad but not what I paid for

 

 

[SavageNeo]

3 minutes ago, Excepsi said:

It is not bad but not what I paid for

 

 

Are your ram seated in a1 b1 or a2 b2 slots

[Excepsi]

My mother board goes ddr4 -1 ddr4-3 ddr4-2 ddr4- 4 i have them placed on the 1 and 2

[DoctorNick]

[DoctorNick]

Also try not overclocking your memory, they might not be stable. I don't know if you tested for stability issues? And no 2400mhz won't matter in CS:GO.

If this isn't working. Then download DDU https://www.wagnardsoft.com/content/display-driver-uninstaller-ddu-v18020-released

Run DDU in safe mode. Reinstall drivers using this driver (works extremely well in CSGO): https://www.nvidia.com/Download/driverResults.aspx/154342/en-us

[Excepsi]

13 minutes ago, SavageNeo said:

Are your ram seated in a1 b1 or a2 b2 slots

 

5 minutes ago, DoctorNick said:

I am useing a2 b2

[191x7]

Which resolution?

 

Latest AMD Chipset drivers? Latest BIOS?

[Excepsi]

1 minute ago, 191x7 said:

Which resolution?

 

Latest AMD Chipset drivers? Latest BIOS?

1080p bios f50 have not updated chipset

 

[Excepsi]

Spoiler

 

 

[191x7]

5 minutes ago, Excepsi said:

1080p bios f50 have not updated chipset

 

Here you go https://www.amd.com/en/support/chipsets/amd-socket-am4/x470

 

Is the EC Firmware also updated? (ECFW from the application downloads on the motherboards site)

[Excepsi]

Just now, 191x7 said:

Here you go https://www.amd.com/en/support/chipsets/amd-socket-am4/x470

 

Is the EC Firmware also updated? (ECFW from the application downloads on the motherboards site)

I do not think so but does a chipset driver really affect performance?

[191x7]

2 minutes ago, Excepsi said:

I do not think so but does a chipset driver really affect performance?

It does, hugely. It's a must with having all the latest AGESA changes. The driver is needed for the chipset to work properly with the last few AGESA updates.

[Excepsi]

3 minutes ago, 191x7 said:

It does, hugely. It's a must with having all the latest AGESA changes. The driver is needed for the chipset to work properly with the last few AGESA updates.

Okay and wjat about that ec firmware thing

[191x7]

1 minute ago, Excepsi said:

Okay and wjat about that ec firmware thing

An embedded controller (EC) is a microcontroller in computers that handles various system tasks that the operating system does not handle.

 

X470 UG had two ECFW updates that were mandatory, one was before the F32 bios (if I'm not mistaken) and the newer one before F40.

In order for the RAM and some other parts to work properly with the F40 or newer bios the last EC Firmware has to be flashed.

[Excepsi]

Just now, 191x7 said:

An embedded controller (EC) is a microcontroller in computers that handles various system tasks that the operating system does not handle.

 

X470 UG had two ECFW updates that were mandatory, one was before the F32 bios (if I'm not mistaken) and the newer one before F40.

In order for the RAM and some other parts to work properly with the F40 or newer bios the last EC Firmware has to be flashed.

Could i get a link please?

[Excepsi]

1 hour ago, 191x7 said:

An embedded controller (EC) is a microcontroller in computers that handles various system tasks that the operating system does not handle.

 

X470 UG had two ECFW updates that were mandatory, one was before the F32 bios (if I'm not mistaken) and the newer one before F40.

In order for the RAM and some other parts to work properly with the F40 or newer bios the last EC Firmware has to be flashed.

Updated everything you said and I have had no luck.

[191x7]

2 hours ago, Excepsi said:

Updated everything you said and I have had no luck.

Have you noticed that flashing the ECFW also flashes an older bios version? If it did, please flash the latest bios. On both the bioses (the latest @flash has the option).

[Excepsi]

3 hours ago, 191x7 said:

Have you noticed that flashing the ECFW also flashes an older bios version? If it did, please flash the latest bios. On both the bioses (the latest @flash has the option).

I dis and i flashed it back to the original one

[Excepsi]

3 hours ago, 191x7 said:

Have you noticed that flashing the ECFW also flashes an older bios version? If it did, please flash the latest bios. On both the bioses (the latest @flash has the option).

And what do you mean by 2 bioses?

[Excepsi]

3 hours ago, 191x7 said:

Have you noticed that flashing the ECFW also flashes an older bios version? If it did, please flash the latest bios. On both the bioses (the latest @flash has the option).

Also what I am seeing is that i am underperforming on everygame.

[191x7]

21 minutes ago, Excepsi said:

And what do you mean by 2 bioses?

The board has dual bios.

If you flash only a one, there might be issues where the second one tries to overwrite the first one since their versions do not match.

 

When running atbios there's an option (checkbox) that lets you flash both.

[Excepsi]

10 minutes ago, 191x7 said:

The board has dual bios.

If you flash only a one, there might be issues where the second one tries to overwrite the first one since their versions do not match.

 

When running atbios there's an option (checkbox) that lets you flash both.

I already update my bios through the motherboard. Or do i have to update through that software?