Jump to content

1 AMD card and 1 Nvidia card?

alarmingtugboat97
Go to solution Solved by DragonTamer1,

It really depends on what you are trying to do. You can absolutely stick them both in the same system and they will show up. But depending on the application you may need to change the order the cards are in (which slots), change the order of the drivers installed, may need to use different video outs.

 

I tried using a R7 370 with a GTX 960 for folding, it kind of worked but not really. The system would boot, see both cards and would start folding but would always fail on the R7. I think this is an issue with the card itself because it didn't even work when I put it in a system by itself. However when I tried putting an RX 480 in the system started having issues with not booting at all. I changed the cards position, driver installs, used older drivers newer drivers and everything in between but no go.

 

It could work, but you may need to put a ridiculous amount of time into making it work. Cards from the same manufacturer in the system works much better even if they are different gens.

Do you want them to work together?

A PC Enthusiast since 2011
AMD Ryzen 7 5700X@4.65GHz | GIGABYTE GTX 1660 GAMING OC @ Core 2085MHz Memory 5000MHz
Cinebench R23: 15669cb | Unigine Superposition 1080p Extreme: 3566
Link to comment
Share on other sites

Link to post
Share on other sites

No.

CPU i7 6700k MB  MSI Z170A Pro Carbon GPU Zotac GTX980Ti amp!extreme RAM 16GB DDR4 Corsair Vengeance 3k CASE Corsair 760T PSU Corsair RM750i MOUSE Logitech G9x KB Logitech G910 HS Sennheiser GSP 500 SC Asus Xonar 7.1 MONITOR Acer Predator xb270hu Storage 1x1TB + 2x500GB Samsung 7200U/m - 2x500GB SSD Samsung 850EVO

Link to comment
Share on other sites

Link to post
Share on other sites

maybe? They run on different drivers so in theory that's possible, it wont work if you use a shiny new Geforce card instead of the Radeon card though

CPU: i7-2600K 4751MHz 1.44V (software) --> 1.47V at the back of the socket Motherboard: Asrock Z77 Extreme4 (BCLK: 103.3MHz) CPU Cooler: Noctua NH-D15 RAM: Adata XPG 2x8GB DDR3 (XMP: 2133MHz 10-11-11-30 CR2, custom: 2203MHz 10-11-10-26 CR1 tRFC:230 tREFI:14000) GPU: Asus GTX 1070 Dual (Super Jetstream vbios, +70(2025-2088MHz)/+400(8.8Gbps)) SSD: Samsung 840 Pro 256GB (main boot drive), Transcend SSD370 128GB PSU: Seasonic X-660 80+ Gold Case: Antec P110 Silent, 5 intakes 1 exhaust Monitor: AOC G2460PF 1080p 144Hz (150Hz max w/ DP, 121Hz max w/ HDMI) TN panel Keyboard: Logitech G610 Orion (Cherry MX Blue) with SteelSeries Apex M260 keycaps Mouse: BenQ Zowie FK1

 

Model: HP Omen 17 17-an110ca CPU: i7-8750H (0.125V core & cache, 50mV SA undervolt) GPU: GTX 1060 6GB Mobile (+80/+450, 1650MHz~1750MHz 0.78V~0.85V) RAM: 8+8GB DDR4-2400 18-17-17-39 2T Storage: HP EX920 1TB PCIe x4 M.2 SSD + Crucial MX500 1TB 2.5" SATA SSD, 128GB Toshiba PCIe x2 M.2 SSD (KBG30ZMV128G) gone cooking externally, 1TB Seagate 7200RPM 2.5" HDD (ST1000LM049-2GH172) left outside Monitor: 1080p 126Hz IPS G-sync

 

Desktop benching:

Cinebench R15 Single thread:168 Multi-thread: 833 

SuperPi (v1.5 from Techpowerup, PI value output) 16K: 0.100s 1M: 8.255s 32M: 7m 45.93s

Link to comment
Share on other sites

Link to post
Share on other sites

It really depends on what you are trying to do. You can absolutely stick them both in the same system and they will show up. But depending on the application you may need to change the order the cards are in (which slots), change the order of the drivers installed, may need to use different video outs.

 

I tried using a R7 370 with a GTX 960 for folding, it kind of worked but not really. The system would boot, see both cards and would start folding but would always fail on the R7. I think this is an issue with the card itself because it didn't even work when I put it in a system by itself. However when I tried putting an RX 480 in the system started having issues with not booting at all. I changed the cards position, driver installs, used older drivers newer drivers and everything in between but no go.

 

It could work, but you may need to put a ridiculous amount of time into making it work. Cards from the same manufacturer in the system works much better even if they are different gens.

Intel Xeon 1650 V0 (4.4GHz @1.4V), ASRock X79 Extreme6, 32GB of HyperX 1866, Sapphire Nitro+ 5700XT, Silverstone Redline (black) RL05BB-W, Crucial MX500 500GB SSD, TeamGroup GX2 512GB SSD, WD AV-25 1TB 2.5" HDD with generic Chinese 120GB SSD as cache, x2 Seagate 2TB SSHD(RAID 0) with generic Chinese 240GB SSD as cache, SeaSonic Focus Plus Gold 850, x2 Acer H236HL, Acer V277U be quiet! Dark Rock Pro 4, Logitech K120, Tecknet "Gaming" mouse, Creative Inspire T2900, HyperX Cloud Flight Wireless headset, Windows 10 Pro 64 bit
Link to comment
Share on other sites

Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

×