newly pc built and boosts but won’t display

[carpalflower3]

so today all of my parts came in for my new pc build and this is my first build i paired a b450m-hd’s r4.0 with a ryzen 3 2200g with 2x4gb sticks of ddr4 2666mhz and a gtx 1050 and i made sure all of the plugs were in correctly and that the header was plugged in right and all the fans run including the gpus but i still get no display please help

[Slottr]

-Moved to Troubleshooting-

 

Using the APU or the GPU?

[Blai5e]

Try moving the display cable to the APU (the graphics port on the motherboard backplate where you find the USB ports). If that works you need to go into the UEFI/BIOS and change the primary display to denote your GTX-1050

[The Spectator]

Ryzen is usually iffy with certain types of memory. Check your Motherboard Manual or the correct placement if you haven't already. I would take out the Right stick of memory and see if it boots, if not then take it out completely and boot and try to get into the bios. then put in both sticks and it usually boots. i just worked with this certain motherboard. its wacky. also make sure your connections to your display is good

[carpalflower3]

2 minutes ago, Blai5e said:

Try moving the display cable to the APU (the graphics port on the motherboard backplate where you find the USB ports). If that works you need to go into the UEFI/BIOS and change the primary display to denote your GTX-1050

i tried this i still get no display from the gpu or the motherboard 

[carpalflower3]

1 minute ago, Budddy1 said:

Ryzen is usually iffy with certain types of memory. Check your Motherboard Manual or the correct placement if you haven't already. I would take out the Right stick of memory and see if it boots, if not then take it out completely and boot and try to get into the bios. then put in both sticks and it usually boots. i just worked with this certain motherboard. its wacky. also make sure your connections to your display is good

like take out both sticks of ram and see if i can get into the bios?

[carpalflower3]

5 minutes ago, Slottr said:

-Moved to Troubleshooting-

 

Using the APU or the GPU?

i tried with and without the gpu 

[The Spectator]

Just now, carpalflower3 said:

like take out both sticks of ram and see if i can get into the bios?

Sure, then re-insert them back in (after a boot) then power off

[Slottr]

Just now, carpalflower3 said:

i tried with and without the gpu 

What type of cable are you using?

[Slottr]

Just now, Budddy1 said:

Sure, then re-insert them back in (after a boot) then power off

Don't misread this.

 

Power your system off, change out of your memory, and then power the system on.

[carpalflower3]

2 minutes ago, Slottr said:

What type of cable are you using?

i tried using vga and hdmi neither game me a display

[Slottr]

Just now, carpalflower3 said:

i tried using vga and hdmi neither game me a display

You're sure the display you're using is working right?

[The Spectator]

3 minutes ago, Slottr said:

Don't misread this.

 

Power your system off, change out of your memory, and then power the system on.

 

My bad, thanks for clarifying me

[carpalflower3]

5 minutes ago, Slottr said:

You're sure the display you're using is working right?

yes i tested 2 different displace and switched the cords

[carpalflower3]

9 minutes ago, Slottr said:

Don't misread this.

 

Power your system off, change out of your memory, and then power the system on.

still no display

[Slottr]

7 minutes ago, carpalflower3 said:

still no display

Weird. Can you list full specs?

[carpalflower3]

15 minutes ago, Slottr said:

Weird. Can you list full specs?

b450m-hdv r4.0

ryzen 3 2200g 

zotac gtx 1050 2gb

patriot viper elite series 2x4gb 2666 mhz 

apevia astro 500w 80+ certified

and my case is a rose will fbm-x1

[Fruit Dubious]

Are you placing the RAM in the correct slots? Some motherboards will refuse to boot unless the RAM configuration is correct.

[carpalflower3]

2 hours ago, ajenningstech said:

Are you placing the RAM in the correct slots? Some motherboards will refuse to boot unless the RAM configuration is correct.

i tried both ram sticks in each slots and even when i boot without the ram i get no post beep from the speaker so i’m starting to think i got a faulty cpu or mobo