Jump to content

Has anyone tried using cold winter air for cooling? I was thinking about using some dryer vent hose to bring air in/out to the case from outside, and have an overclock session. Would be looking at air way below 0c. (canadian here) Any thoughts? Condensation might be a problem having cold air inside the case with it in a warm room?

Link to comment
https://linustechtips.com/topic/1123741-outdoor-winter-air-cooling/
Share on other sites

Link to post
Share on other sites

Just have the machine outside with cables leaving and entering through the window? Not enough cold air if the system still stays inside

CPU: i7-2600K 4751MHz 1.44V (software) --> 1.47V at the back of the socket Motherboard: Asrock Z77 Extreme4 (BCLK: 103.3MHz) CPU Cooler: Noctua NH-D15 RAM: Adata XPG 2x8GB DDR3 (XMP: 2133MHz 10-11-11-30 CR2, custom: 2203MHz 10-11-10-26 CR1 tRFC:230 tREFI:14000) GPU: Asus GTX 1070 Dual (Super Jetstream vbios, +70(2025-2088MHz)/+400(8.8Gbps)) SSD: Samsung 840 Pro 256GB (main boot drive), Transcend SSD370 128GB PSU: Seasonic X-660 80+ Gold Case: Antec P110 Silent, 5 intakes 1 exhaust Monitor: AOC G2460PF 1080p 144Hz (150Hz max w/ DP, 121Hz max w/ HDMI) TN panel Keyboard: Logitech G610 Orion (Cherry MX Blue) with SteelSeries Apex M260 keycaps Mouse: BenQ Zowie FK1

 

Model: HP Omen 17 17-an110ca CPU: i7-8750H (0.125V core & cache, 50mV SA undervolt) GPU: GTX 1060 6GB Mobile (+80/+450, 1650MHz~1750MHz 0.78V~0.85V) RAM: 8+8GB DDR4-2400 18-17-17-39 2T Storage: HP EX920 1TB PCIe x4 M.2 SSD + Crucial MX500 1TB 2.5" SATA SSD, 128GB Toshiba PCIe x2 M.2 SSD (KBG30ZMV128G) gone cooking externally, 1TB Seagate 7200RPM 2.5" HDD (ST1000LM049-2GH172) left outside Monitor: 1080p 126Hz IPS G-sync

 

Desktop benching:

Cinebench R15 Single thread:168 Multi-thread: 833 

SuperPi (v1.5 from Techpowerup, PI value output) 16K: 0.100s 1M: 8.255s 32M: 7m 45.93s

Link to post
Share on other sites

if you have a water loop, why not place the radiator outdoors lol

Im with the mentaility of "IF IM NOT SURE IF ITS ENOUGH COOLING, GO OVERKILL"

 

CURRENT PC SPECS    

CPU             Ryzen 5 3600 (Formerly Ryzen 3 1200)

GPU             : ASUS RX 580 Dual OC (Formerly ASUS GTX 1060 but it got corroded for some odd reasons)

GPU COOOER      : ID Cooling Frostflow 120 VGA (Stock cooler overheats even when undervolted :()

MOBO            : MSI B350m Bazooka

MEMORY          Team Group Elite TUF DDR4 3600 Mhz CL 16
STORAGE         : Seagate Baracudda 1TB and Kingston SSD
PSU             : Thermaltake Lite power 550W (Gonna change soon as i dont trust this)
CASE            : Rakk Anyag Frost
CPU COOLER      : ID-Cooling SE 207
CASE FANS       : Mix of ID cooling fans, Corsair fans and Rakk Ounos (planned change to ID Cooling)
DISPLAY         : SpectrePro XTNS24 144hz Curved VA panel
MOUSE           : Logitech G603 Lightspeed
KEYBOARD        : Rakk Lam Ang

HEADSET         : Plantronics RIG 500HD

Kingston Hyper X Stinger

 

and a whole lot of LED everywhere(behind the monitor, behind the desk, behind the shelf of the PC mount and inside the case)

Link to post
Share on other sites

Looking at the replies, I need to clarify things. Will setup the front of the case with ducting to the cold outside air. All the intake would be from outside ambient. Could exhaust inside the house, but hopefully the case exhaust is gonna be cold also, and should be blown back outside. Would be like one of those mobile air conditioners. I'm just wondering if having the case sitting in warm indoor temps with a potential 50 degree C delta - internal vs. external would cause issues...

 

Link to post
Share on other sites

as long as condensation is prevented in the case, its all good.

Im with the mentaility of "IF IM NOT SURE IF ITS ENOUGH COOLING, GO OVERKILL"

 

CURRENT PC SPECS    

CPU             Ryzen 5 3600 (Formerly Ryzen 3 1200)

GPU             : ASUS RX 580 Dual OC (Formerly ASUS GTX 1060 but it got corroded for some odd reasons)

GPU COOOER      : ID Cooling Frostflow 120 VGA (Stock cooler overheats even when undervolted :()

MOBO            : MSI B350m Bazooka

MEMORY          Team Group Elite TUF DDR4 3600 Mhz CL 16
STORAGE         : Seagate Baracudda 1TB and Kingston SSD
PSU             : Thermaltake Lite power 550W (Gonna change soon as i dont trust this)
CASE            : Rakk Anyag Frost
CPU COOLER      : ID-Cooling SE 207
CASE FANS       : Mix of ID cooling fans, Corsair fans and Rakk Ounos (planned change to ID Cooling)
DISPLAY         : SpectrePro XTNS24 144hz Curved VA panel
MOUSE           : Logitech G603 Lightspeed
KEYBOARD        : Rakk Lam Ang

HEADSET         : Plantronics RIG 500HD

Kingston Hyper X Stinger

 

and a whole lot of LED everywhere(behind the monitor, behind the desk, behind the shelf of the PC mount and inside the case)

Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

×