Aorus X570 Elite won't post

[yuanfu235]

So I was tinkering with the bios and I tried to overclocked it in the settings section, when it restarted it didn't post up to now.

I've tried reinstalling the RAM, GPU, CPU and removed the battery to reset the bios.

Help!

[Stormseeker9]

Assuming a too high OC was applied, the Pc will boot cycle (especially if you were tinkering with ram) and go to its default settings in the bios at some point.

 

removing cmos battery / shorting cmos didn’t work?

[yuanfu235]

17 minutes ago, Stormseeker9 said:

Assuming a too high OC was applied, the Pc will boot cycle (especially if you were tinkering with ram) and go to its default settings in the bios at some point.

 

removing cmos battery / shorting cmos didn’t work?

Yes I've tried removing the cmos battery a couple of times now and it didnt work,

I only tried to OC my ryzen to 4.1 GHz which shouldn't cause a problem. 

 

[Streetguru]

2 minutes ago, yuanfu235 said:

Yes I've tried removing the cmos battery a couple of times now and it didnt work,

I only tried to OC my ryzen to 4.1 GHz which shouldn't cause a problem. 

 

Your bios should automatically reset itself

 

but you have USB bios flashing on that motherboard, so you could just try that in a worst case scenario.

[yuanfu235]

1 hour ago, Streetguru said:

Your bios should automatically reset itself

 

but you have USB bios flashing on that motherboard, so you could just try that in a worst case scenario.

I've tried flashing to the latest bios, it still won't post.

[Streetguru]

6 minutes ago, yuanfu235 said:

I've tried flashing to the latest bios, it still won't post.

Is there a local PC shop you could take it to to start swapping parts with?

I've no idea what might have happened unless it somehow threw a whole lot of voltage at something.

[yuanfu235]

Just now, Streetguru said:

Is there a local PC shop you could take it to to start swapping parts with?

I've no idea what might have happened unless it somehow threw a whole lot of voltage at something.

Update: 
It actually worked!!!
Thank you so much!

[Ema J]

 

On 10/25/2019 at 1:34 PM, yuanfu235 said:

Update: 
It actually worked!!!
Thank you so much!

What did you do for it to work?