When I try to install windows via usb I get an error

[DoZe]

When I tried to install windows on my new rig with an usb and I came to the part were I need to choose the hard drive and then there doesn't show a hard drive and it says my computer is missing drivers but I updated my intel chip driver. And I don't know what to do I am working on this since 12 hours straight.

 

Thank you very much if u could help me!

[kelvinhall05]

Specs? New parts? Is everything plugged in? Are your drives getting power?

[Master Disaster]

Are you using a DVD or a purchased flash drive? Is it even Windows 10? And yeah, specs too please.

 

[DoZe]

54 minutes ago, Master Disaster said:

Are you using a DVD or a purchased flash drive? Is it even Windows 10? And yeah, specs too please.

 

i5 9600k

Asus gtx 1060 6gb

MSI z390 gaming edge ac

16 ddr4 ram 3000mhz

SSD 860 evo 500gb

 

No I made my own

[DoZe]

1 hour ago, kelvinhall05 said:

Specs? New parts? Is everything plugged in? Are your drives getting power?

i5 9600k

Asus gtx 1060 6gb

MSI z390 gaming edge ac

16 ddr4 ram 3000mhz

SSD 860 evo 500gb

 

Yeah cpu new and ram and mobo but not ssd and gpu but wenn I get into the drive selection it also says it doesn't find a drive but in my bios it shows that my ssd is connected.

[Eumel2]

is it shown in the bios?

[DoZe]

Just now, DoZe said:

i5 9600k

Asus gtx 1060 6gb

MSI z390 gaming edge ac

16 ddr4 ram 3000mhz

SSD 860 evo 500gb

 

Yeah cpu new and ram and mobo but not ssd and gpu but wenn I get into the drive selection it also says it doesn't find a drive but in my bios it shows that my ssd is connected.

Thx for help!

[Eumel2]

try to get into the troubleshoot part of the windows installation and then to the command line

 

there type: 

diskpart

then 

list volume
list disk

and see what that outputs

[DoZe]

2 minutes ago, Eumel2 said:

try to get into the troubleshoot part of the windows installation and then to the command line

 

there type: 

diskpart

then 

list volume
list disk

and see what that outputs

It show disk 0 and disk 1 or 2 cant do it right now bc remove the installation from the usb

 

[Eumel2]

so the disks are shown there as well?

do

select disk 0
list partition

then if there are any use

clean

see if that does something

[DoZe]

Just now, Eumel2 said:

so the disks are shown there as well?

do

select disk 0
list partition

then if there are any use

clean

see if that does something

yea did that already disk is 465 gb out of 465 free

[Eumel2]

can you post the full error message?

[DoZe]

1 minute ago, DoZe said:

yea did that already disk is 465 gb out of 465 free

It says something about my drivers at the start do you think you could tell me all I need pls?

[DoZe]

2 minutes ago, Eumel2 said:

can you post the full error message?

"A media driver your computer needs is missing" or "A required CD/DVD drive device driver is missing"

[Eumel2]

have you tried a different usb stick and different usb port?

you can also try downloading the win 10 iso and dropping it onto the stick with rufus

 

[DoZe]

3 minutes ago, Eumel2 said:

have you tried a different usb stick and different usb port?

you can also try downloading the win 10 iso and dropping it onto the stick with rufus

 

yea I can should I ?

[Eumel2]

its worth a try

[DoZe]

5 minutes ago, Eumel2 said:

its worth a try

Okay Ill do it ill start downloading now

[DoZe]

7 minutes ago, Eumel2 said:

its worth a try

And whats about the drivers? Thank you tho! 

[Eumel2]

they can sometimes bug out on certain slots sticks or a corrupt boot media

[DoZe]

5 minutes ago, Eumel2 said:

they can sometimes bug out on certain slots sticks or a corrupt boot media

I am not finish downloading but I am gobba try tomorrow it 12 am for me almoat. Thank you~