VESA Stand

[gravdestroyer]

Is this monitor VESA compatible: https://www.pbtech.co.nz/product/MONTTA3340/Titan-Army-34-UltraWide-Curved-Monitor--Samsung-VA ? I've seen people say that it is VESA compatible Is it also possible to get a VESA adapter for it in the case that it is not compatible?

[goto10]

the link you provide says no

 

the brand and model is hard to find, this image from that same link shows that no, definitively no

 

 

there are no vesa mounting holes in there

 

is also a bit heavy, 10 kilograms, so better use it with the included stand

 

[VIVO-US]

According to the manufacturer, the monitor has VESA 75x75mm mounting holes.  They're most likely recessed in the square cutout where the original stand fits, similar to a lot of Dell monitors.

[LyondellBasell]

On 8/2/2019 at 10:15 PM, goto10 said:

the link you provide says no

 

the brand and model is hard to find, this image from that same link shows that no, definitively no

 

 

there are no vesa mounting holes in there

 

is also a bit heavy, 10 kilograms, so better use it with the included stand

 

The holes are under the plate on the back. See the small latch below the stand's connection to the panel? The latch can be depressed and the stand removed. Under the white cover plate will be the holes for the VESA mount.

 

I don't have this exact monitor but I used to have a similar situation where the monitor came with a cover plate for finished look when using the included stand, but had the option of removing the plate and the stand if you wanted to use a VESA mount and arms.

[goto10]

if the holes are under the arm mounting mechanism, those must be very small, you would have to buy it and thrn fight with it to see what fits there or if you can build a plate to connect to a normal vesa mount, but to me looks too small, normal vesa doesnt fit there in my opinion