Jump to content

I reverted my i7 5820k back to stock this week, never fully utilized stock speed with it OCed it only added more heat to my room. While i was stress testing my cpu with intel extreme tuning after messing around with cpu fan curve to see how it was doing. I noticed in H/W monitor my core #5 reached 3.6ghz turbo speed while the rest of 5 cores only reached 3.4ghz. Is this normal to have one core higher than the rest?

Link to comment
https://linustechtips.com/topic/1071242-different-core-speed/
Share on other sites

Link to post
Share on other sites

what about hwinfo64? HWmonitor tends to misread stuff

CPU: i7-2600K 4751MHz 1.44V (software) --> 1.47V at the back of the socket Motherboard: Asrock Z77 Extreme4 (BCLK: 103.3MHz) CPU Cooler: Noctua NH-D15 RAM: Adata XPG 2x8GB DDR3 (XMP: 2133MHz 10-11-11-30 CR2, custom: 2203MHz 10-11-10-26 CR1 tRFC:230 tREFI:14000) GPU: Asus GTX 1070 Dual (Super Jetstream vbios, +70(2025-2088MHz)/+400(8.8Gbps)) SSD: Samsung 840 Pro 256GB (main boot drive), Transcend SSD370 128GB PSU: Seasonic X-660 80+ Gold Case: Antec P110 Silent, 5 intakes 1 exhaust Monitor: AOC G2460PF 1080p 144Hz (150Hz max w/ DP, 121Hz max w/ HDMI) TN panel Keyboard: Logitech G610 Orion (Cherry MX Blue) with SteelSeries Apex M260 keycaps Mouse: BenQ Zowie FK1

 

Model: HP Omen 17 17-an110ca CPU: i7-8750H (0.125V core & cache, 50mV SA undervolt) GPU: GTX 1060 6GB Mobile (+80/+450, 1650MHz~1750MHz 0.78V~0.85V) RAM: 8+8GB DDR4-2400 18-17-17-39 2T Storage: HP EX920 1TB PCIe x4 M.2 SSD + Crucial MX500 1TB 2.5" SATA SSD, 128GB Toshiba PCIe x2 M.2 SSD (KBG30ZMV128G) gone cooking externally, 1TB Seagate 7200RPM 2.5" HDD (ST1000LM049-2GH172) left outside Monitor: 1080p 126Hz IPS G-sync

 

Desktop benching:

Cinebench R15 Single thread:168 Multi-thread: 833 

SuperPi (v1.5 from Techpowerup, PI value output) 16K: 0.100s 1M: 8.255s 32M: 7m 45.93s

Link to comment
https://linustechtips.com/topic/1071242-different-core-speed/#findComment-12631637
Share on other sites

Link to post
Share on other sites

3 hours ago, winkawak said:

it doesnt show all 6 core speed/temp like hwmonitor

scroll down, it will show it somewhere.

 

but as far as I know X99 can indeed run different multipliers on different CPU cores. 

CPU: i7-2600K 4751MHz 1.44V (software) --> 1.47V at the back of the socket Motherboard: Asrock Z77 Extreme4 (BCLK: 103.3MHz) CPU Cooler: Noctua NH-D15 RAM: Adata XPG 2x8GB DDR3 (XMP: 2133MHz 10-11-11-30 CR2, custom: 2203MHz 10-11-10-26 CR1 tRFC:230 tREFI:14000) GPU: Asus GTX 1070 Dual (Super Jetstream vbios, +70(2025-2088MHz)/+400(8.8Gbps)) SSD: Samsung 840 Pro 256GB (main boot drive), Transcend SSD370 128GB PSU: Seasonic X-660 80+ Gold Case: Antec P110 Silent, 5 intakes 1 exhaust Monitor: AOC G2460PF 1080p 144Hz (150Hz max w/ DP, 121Hz max w/ HDMI) TN panel Keyboard: Logitech G610 Orion (Cherry MX Blue) with SteelSeries Apex M260 keycaps Mouse: BenQ Zowie FK1

 

Model: HP Omen 17 17-an110ca CPU: i7-8750H (0.125V core & cache, 50mV SA undervolt) GPU: GTX 1060 6GB Mobile (+80/+450, 1650MHz~1750MHz 0.78V~0.85V) RAM: 8+8GB DDR4-2400 18-17-17-39 2T Storage: HP EX920 1TB PCIe x4 M.2 SSD + Crucial MX500 1TB 2.5" SATA SSD, 128GB Toshiba PCIe x2 M.2 SSD (KBG30ZMV128G) gone cooking externally, 1TB Seagate 7200RPM 2.5" HDD (ST1000LM049-2GH172) left outside Monitor: 1080p 126Hz IPS G-sync

 

Desktop benching:

Cinebench R15 Single thread:168 Multi-thread: 833 

SuperPi (v1.5 from Techpowerup, PI value output) 16K: 0.100s 1M: 8.255s 32M: 7m 45.93s

Link to comment
https://linustechtips.com/topic/1071242-different-core-speed/#findComment-12632767
Share on other sites

Link to post
Share on other sites

19 minutes ago, Jurrunio said:

scroll down, it will show it somewhere.

 

but as far as I know X99 can indeed run different multipliers on different CPU cores. 

sorry i got realtemp confused with hwinfo64, i downloaded both

btw whats the difference between realtemp/realtempgt/i7turbogt?

Link to comment
https://linustechtips.com/topic/1071242-different-core-speed/#findComment-12632811
Share on other sites

Link to post
Share on other sites

4 minutes ago, winkawak said:

btw whats the difference between realtemp/realtempgt/i7turbogt?

No idea, Hwinfo64 does everything they can so I dont see the point to let those take my storage space

CPU: i7-2600K 4751MHz 1.44V (software) --> 1.47V at the back of the socket Motherboard: Asrock Z77 Extreme4 (BCLK: 103.3MHz) CPU Cooler: Noctua NH-D15 RAM: Adata XPG 2x8GB DDR3 (XMP: 2133MHz 10-11-11-30 CR2, custom: 2203MHz 10-11-10-26 CR1 tRFC:230 tREFI:14000) GPU: Asus GTX 1070 Dual (Super Jetstream vbios, +70(2025-2088MHz)/+400(8.8Gbps)) SSD: Samsung 840 Pro 256GB (main boot drive), Transcend SSD370 128GB PSU: Seasonic X-660 80+ Gold Case: Antec P110 Silent, 5 intakes 1 exhaust Monitor: AOC G2460PF 1080p 144Hz (150Hz max w/ DP, 121Hz max w/ HDMI) TN panel Keyboard: Logitech G610 Orion (Cherry MX Blue) with SteelSeries Apex M260 keycaps Mouse: BenQ Zowie FK1

 

Model: HP Omen 17 17-an110ca CPU: i7-8750H (0.125V core & cache, 50mV SA undervolt) GPU: GTX 1060 6GB Mobile (+80/+450, 1650MHz~1750MHz 0.78V~0.85V) RAM: 8+8GB DDR4-2400 18-17-17-39 2T Storage: HP EX920 1TB PCIe x4 M.2 SSD + Crucial MX500 1TB 2.5" SATA SSD, 128GB Toshiba PCIe x2 M.2 SSD (KBG30ZMV128G) gone cooking externally, 1TB Seagate 7200RPM 2.5" HDD (ST1000LM049-2GH172) left outside Monitor: 1080p 126Hz IPS G-sync

 

Desktop benching:

Cinebench R15 Single thread:168 Multi-thread: 833 

SuperPi (v1.5 from Techpowerup, PI value output) 16K: 0.100s 1M: 8.255s 32M: 7m 45.93s

Link to comment
https://linustechtips.com/topic/1071242-different-core-speed/#findComment-12632821
Share on other sites

Link to post
Share on other sites

48 minutes ago, Jurrunio said:

but as far as I know X99 can indeed run different multipliers on different CPU cores. 

Kinda sorta. Overclocked, Haswell-E doesn't officially support different multipliers on different cores. Broadwell-E does.

 

 

But looking at those speeds, I don't think his system is overclocked. 3.6GHz on one core, that's the turbo speed of the 5820K...

Come Bloody Angel

Break off your chains

And look what I've found in the dirt.

 

Pale battered body

Seems she was struggling

Something is wrong with this world.

 

Fierce Bloody Angel

The blood is on your hands

Why did you come to this world?

 

Everybody turns to dust.

 

Everybody turns to dust.

 

The blood is on your hands.

 

The blood is on your hands!

 

Pyo.

Link to comment
https://linustechtips.com/topic/1071242-different-core-speed/#findComment-12632851
Share on other sites

Link to post
Share on other sites

43 minutes ago, Drak3 said:

Kinda sorta. Overclocked, Haswell-E doesn't officially support different multipliers on different cores. Broadwell-E does.

 

 

But looking at those speeds, I don't think his system is overclocked. 3.6GHz on one core, that's the turbo speed of the 5820K...

maybe Haswell-E can do it at stock settings, just like 2nd gen Ryzen?

CPU: i7-2600K 4751MHz 1.44V (software) --> 1.47V at the back of the socket Motherboard: Asrock Z77 Extreme4 (BCLK: 103.3MHz) CPU Cooler: Noctua NH-D15 RAM: Adata XPG 2x8GB DDR3 (XMP: 2133MHz 10-11-11-30 CR2, custom: 2203MHz 10-11-10-26 CR1 tRFC:230 tREFI:14000) GPU: Asus GTX 1070 Dual (Super Jetstream vbios, +70(2025-2088MHz)/+400(8.8Gbps)) SSD: Samsung 840 Pro 256GB (main boot drive), Transcend SSD370 128GB PSU: Seasonic X-660 80+ Gold Case: Antec P110 Silent, 5 intakes 1 exhaust Monitor: AOC G2460PF 1080p 144Hz (150Hz max w/ DP, 121Hz max w/ HDMI) TN panel Keyboard: Logitech G610 Orion (Cherry MX Blue) with SteelSeries Apex M260 keycaps Mouse: BenQ Zowie FK1

 

Model: HP Omen 17 17-an110ca CPU: i7-8750H (0.125V core & cache, 50mV SA undervolt) GPU: GTX 1060 6GB Mobile (+80/+450, 1650MHz~1750MHz 0.78V~0.85V) RAM: 8+8GB DDR4-2400 18-17-17-39 2T Storage: HP EX920 1TB PCIe x4 M.2 SSD + Crucial MX500 1TB 2.5" SATA SSD, 128GB Toshiba PCIe x2 M.2 SSD (KBG30ZMV128G) gone cooking externally, 1TB Seagate 7200RPM 2.5" HDD (ST1000LM049-2GH172) left outside Monitor: 1080p 126Hz IPS G-sync

 

Desktop benching:

Cinebench R15 Single thread:168 Multi-thread: 833 

SuperPi (v1.5 from Techpowerup, PI value output) 16K: 0.100s 1M: 8.255s 32M: 7m 45.93s

Link to comment
https://linustechtips.com/topic/1071242-different-core-speed/#findComment-12632889
Share on other sites

Link to post
Share on other sites

Just now, Jurrunio said:

maybe Haswell-E can do it at stock settings, just like 2nd gen Ryzen?

That's basically what I said. Haswell-E can't do it overclocked.

Come Bloody Angel

Break off your chains

And look what I've found in the dirt.

 

Pale battered body

Seems she was struggling

Something is wrong with this world.

 

Fierce Bloody Angel

The blood is on your hands

Why did you come to this world?

 

Everybody turns to dust.

 

Everybody turns to dust.

 

The blood is on your hands.

 

The blood is on your hands!

 

Pyo.

Link to comment
https://linustechtips.com/topic/1071242-different-core-speed/#findComment-12632893
Share on other sites

Link to post
Share on other sites

4 minutes ago, Drak3 said:

That's basically what I said. Haswell-E can't do it overclocked.

so you're implying that Haswell-E can do it stock? "Because OP removed the overclock already

CPU: i7-2600K 4751MHz 1.44V (software) --> 1.47V at the back of the socket Motherboard: Asrock Z77 Extreme4 (BCLK: 103.3MHz) CPU Cooler: Noctua NH-D15 RAM: Adata XPG 2x8GB DDR3 (XMP: 2133MHz 10-11-11-30 CR2, custom: 2203MHz 10-11-10-26 CR1 tRFC:230 tREFI:14000) GPU: Asus GTX 1070 Dual (Super Jetstream vbios, +70(2025-2088MHz)/+400(8.8Gbps)) SSD: Samsung 840 Pro 256GB (main boot drive), Transcend SSD370 128GB PSU: Seasonic X-660 80+ Gold Case: Antec P110 Silent, 5 intakes 1 exhaust Monitor: AOC G2460PF 1080p 144Hz (150Hz max w/ DP, 121Hz max w/ HDMI) TN panel Keyboard: Logitech G610 Orion (Cherry MX Blue) with SteelSeries Apex M260 keycaps Mouse: BenQ Zowie FK1

 

Model: HP Omen 17 17-an110ca CPU: i7-8750H (0.125V core & cache, 50mV SA undervolt) GPU: GTX 1060 6GB Mobile (+80/+450, 1650MHz~1750MHz 0.78V~0.85V) RAM: 8+8GB DDR4-2400 18-17-17-39 2T Storage: HP EX920 1TB PCIe x4 M.2 SSD + Crucial MX500 1TB 2.5" SATA SSD, 128GB Toshiba PCIe x2 M.2 SSD (KBG30ZMV128G) gone cooking externally, 1TB Seagate 7200RPM 2.5" HDD (ST1000LM049-2GH172) left outside Monitor: 1080p 126Hz IPS G-sync

 

Desktop benching:

Cinebench R15 Single thread:168 Multi-thread: 833 

SuperPi (v1.5 from Techpowerup, PI value output) 16K: 0.100s 1M: 8.255s 32M: 7m 45.93s

Link to comment
https://linustechtips.com/topic/1071242-different-core-speed/#findComment-12632896
Share on other sites

Link to post
Share on other sites

1 minute ago, Jurrunio said:

so you're implying that Haswell-E can do it stock? "Because OP removed the overclock already

Yes.

Come Bloody Angel

Break off your chains

And look what I've found in the dirt.

 

Pale battered body

Seems she was struggling

Something is wrong with this world.

 

Fierce Bloody Angel

The blood is on your hands

Why did you come to this world?

 

Everybody turns to dust.

 

Everybody turns to dust.

 

The blood is on your hands.

 

The blood is on your hands!

 

Pyo.

Link to comment
https://linustechtips.com/topic/1071242-different-core-speed/#findComment-12632899
Share on other sites

Link to post
Share on other sites

Okay so i ran the quick stress test again with hwinfo64 and its displaying all cores at 3.4ghz unlike hwmonitor. I guess its not as accurate as i thought it was and holy crap does hwinfo64 shows a ton of info i never knew existed. Yea my cpu is stock right now, any reason why its only 3.4ghz? when it says turbo speed stock is 3.6ghz?

Link to comment
https://linustechtips.com/topic/1071242-different-core-speed/#findComment-12632923
Share on other sites

Link to post
Share on other sites

@Drak3 @Jurrunio

The max turbo for the 5820k varies depending on the load. 3.6ghz for 1-2 cores and 3.4ghz for 3+ cores. https://en.m.wikipedia.org/wiki/List_of_Intel_Core_i7_microprocessors#.22Haswell-E.22_.2822_nm.29

If you ever need help with a build, read the following before posting: http://linustechtips.com/main/topic/3061-build-plan-thread-recommendations-please-read-before-posting/
Also, make sure to quote a post or tag a member when replying or else they won't get a notification that you replied to them.

Link to comment
https://linustechtips.com/topic/1071242-different-core-speed/#findComment-12633005
Share on other sites

Link to post
Share on other sites

1 hour ago, winkawak said:

any reason why its only 3.4ghz? when it says turbo speed stock is 3.6ghz?

because all core turbo is often lower than the specs sheet say. The max turbo isn't reached on all cores.

 

3 minutes ago, WoodenMarker said:

@Drak3 @Jurrunio

The max turbo for the 5820k varies depending on the load. 3.6ghz for 1-2 cores and 3.4ghz for 3+ cores. https://en.m.wikipedia.org/wiki/List_of_Intel_Core_i7_microprocessors#.22Haswell-E.22_.2822_nm.29

we're talking about different cores running different frequencies in the same CPU. 

CPU: i7-2600K 4751MHz 1.44V (software) --> 1.47V at the back of the socket Motherboard: Asrock Z77 Extreme4 (BCLK: 103.3MHz) CPU Cooler: Noctua NH-D15 RAM: Adata XPG 2x8GB DDR3 (XMP: 2133MHz 10-11-11-30 CR2, custom: 2203MHz 10-11-10-26 CR1 tRFC:230 tREFI:14000) GPU: Asus GTX 1070 Dual (Super Jetstream vbios, +70(2025-2088MHz)/+400(8.8Gbps)) SSD: Samsung 840 Pro 256GB (main boot drive), Transcend SSD370 128GB PSU: Seasonic X-660 80+ Gold Case: Antec P110 Silent, 5 intakes 1 exhaust Monitor: AOC G2460PF 1080p 144Hz (150Hz max w/ DP, 121Hz max w/ HDMI) TN panel Keyboard: Logitech G610 Orion (Cherry MX Blue) with SteelSeries Apex M260 keycaps Mouse: BenQ Zowie FK1

 

Model: HP Omen 17 17-an110ca CPU: i7-8750H (0.125V core & cache, 50mV SA undervolt) GPU: GTX 1060 6GB Mobile (+80/+450, 1650MHz~1750MHz 0.78V~0.85V) RAM: 8+8GB DDR4-2400 18-17-17-39 2T Storage: HP EX920 1TB PCIe x4 M.2 SSD + Crucial MX500 1TB 2.5" SATA SSD, 128GB Toshiba PCIe x2 M.2 SSD (KBG30ZMV128G) gone cooking externally, 1TB Seagate 7200RPM 2.5" HDD (ST1000LM049-2GH172) left outside Monitor: 1080p 126Hz IPS G-sync

 

Desktop benching:

Cinebench R15 Single thread:168 Multi-thread: 833 

SuperPi (v1.5 from Techpowerup, PI value output) 16K: 0.100s 1M: 8.255s 32M: 7m 45.93s

Link to comment
https://linustechtips.com/topic/1071242-different-core-speed/#findComment-12633011
Share on other sites

Link to post
Share on other sites

3 minutes ago, Jurrunio said:

because all core turbo is often lower than the specs sheet say. The max turbo isn't reached on all cores.

we're talking about different cores running different frequencies in the same CPU. 

That's.. what I just said. 

If you ever need help with a build, read the following before posting: http://linustechtips.com/main/topic/3061-build-plan-thread-recommendations-please-read-before-posting/
Also, make sure to quote a post or tag a member when replying or else they won't get a notification that you replied to them.

Link to comment
https://linustechtips.com/topic/1071242-different-core-speed/#findComment-12633019
Share on other sites

Link to post
Share on other sites

1 minute ago, WoodenMarker said:

That's.. what I just said. 

You made it sound like the old kind of turbo

CPU: i7-2600K 4751MHz 1.44V (software) --> 1.47V at the back of the socket Motherboard: Asrock Z77 Extreme4 (BCLK: 103.3MHz) CPU Cooler: Noctua NH-D15 RAM: Adata XPG 2x8GB DDR3 (XMP: 2133MHz 10-11-11-30 CR2, custom: 2203MHz 10-11-10-26 CR1 tRFC:230 tREFI:14000) GPU: Asus GTX 1070 Dual (Super Jetstream vbios, +70(2025-2088MHz)/+400(8.8Gbps)) SSD: Samsung 840 Pro 256GB (main boot drive), Transcend SSD370 128GB PSU: Seasonic X-660 80+ Gold Case: Antec P110 Silent, 5 intakes 1 exhaust Monitor: AOC G2460PF 1080p 144Hz (150Hz max w/ DP, 121Hz max w/ HDMI) TN panel Keyboard: Logitech G610 Orion (Cherry MX Blue) with SteelSeries Apex M260 keycaps Mouse: BenQ Zowie FK1

 

Model: HP Omen 17 17-an110ca CPU: i7-8750H (0.125V core & cache, 50mV SA undervolt) GPU: GTX 1060 6GB Mobile (+80/+450, 1650MHz~1750MHz 0.78V~0.85V) RAM: 8+8GB DDR4-2400 18-17-17-39 2T Storage: HP EX920 1TB PCIe x4 M.2 SSD + Crucial MX500 1TB 2.5" SATA SSD, 128GB Toshiba PCIe x2 M.2 SSD (KBG30ZMV128G) gone cooking externally, 1TB Seagate 7200RPM 2.5" HDD (ST1000LM049-2GH172) left outside Monitor: 1080p 126Hz IPS G-sync

 

Desktop benching:

Cinebench R15 Single thread:168 Multi-thread: 833 

SuperPi (v1.5 from Techpowerup, PI value output) 16K: 0.100s 1M: 8.255s 32M: 7m 45.93s

Link to comment
https://linustechtips.com/topic/1071242-different-core-speed/#findComment-12633021
Share on other sites

Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

×