Jump to content

Network Speed Settings

MotherBoardEater11
 Share
Posted

I just upgraded my internet speed from 100/10 mbps to 300/30 mbps. I have a 1gbps ethernet controller, cat5e, a 1gbps+ router and a 1gbps+ modem, and I have recived the change from my ISP because my upload went to 30mbps, and my router says 300/30 is what it is getting from the modem. My Intel network controller settings say that I only have 100mbps and is therfore locking it, and even when I set the limit to 1gbps it still says that it is 100mbps connection. Is there any way that I can fix this? and yes, I checked the cable.

 

EDIT: SOLVED

Link to comment
https://linustechtips.com/topic/1060116-network-speed-settings/
Share on other sites
Link to post
Share on other sites
Posted

is the network card in the device?

CPU: i7-2600K 4751MHz 1.44V (software) --> 1.47V at the back of the socket Motherboard: Asrock Z77 Extreme4 (BCLK: 103.3MHz) CPU Cooler: Noctua NH-D15 RAM: Adata XPG 2x8GB DDR3 (XMP: 2133MHz 10-11-11-30 CR2, custom: 2203MHz 10-11-10-26 CR1 tRFC:230 tREFI:14000) GPU: Asus GTX 1070 Dual (Super Jetstream vbios, +70(2025-2088MHz)/+400(8.8Gbps)) SSD: Samsung 840 Pro 256GB (main boot drive), Transcend SSD370 128GB PSU: Seasonic X-660 80+ Gold Case: Antec P110 Silent, 5 intakes 1 exhaust Monitor: AOC G2460PF 1080p 144Hz (150Hz max w/ DP, 121Hz max w/ HDMI) TN panel Keyboard: Logitech G610 Orion (Cherry MX Blue) with SteelSeries Apex M260 keycaps Mouse: BenQ Zowie FK1

 

Model: HP Omen 17 17-an110ca CPU: i7-8750H (0.125V core & cache, 50mV SA undervolt) GPU: GTX 1060 6GB Mobile (+80/+450, 1650MHz~1750MHz 0.78V~0.85V) RAM: 8+8GB DDR4-2400 18-17-17-39 2T Storage: HP EX920 1TB PCIe x4 M.2 SSD + Crucial MX500 1TB 2.5" SATA SSD, 128GB Toshiba PCIe x2 M.2 SSD (KBG30ZMV128G) gone cooking externally, 1TB Seagate 7200RPM 2.5" HDD (ST1000LM049-2GH172) left outside Monitor: 1080p 126Hz IPS G-sync

 

Desktop benching:

Cinebench R15 Single thread:168 Multi-thread: 833 

SuperPi (v1.5 from Techpowerup, PI value output) 16K: 0.100s 1M: 8.255s 32M: 7m 45.93s

Link to comment
https://linustechtips.com/topic/1060116-network-speed-settings/#findComment-12531318
Share on other sites
Link to post
Share on other sites
Posted
1 hour ago, MotherBoardEater11 said:

it is built in to my motherboard

X470 Carbon still?

CPU: i7-2600K 4751MHz 1.44V (software) --> 1.47V at the back of the socket Motherboard: Asrock Z77 Extreme4 (BCLK: 103.3MHz) CPU Cooler: Noctua NH-D15 RAM: Adata XPG 2x8GB DDR3 (XMP: 2133MHz 10-11-11-30 CR2, custom: 2203MHz 10-11-10-26 CR1 tRFC:230 tREFI:14000) GPU: Asus GTX 1070 Dual (Super Jetstream vbios, +70(2025-2088MHz)/+400(8.8Gbps)) SSD: Samsung 840 Pro 256GB (main boot drive), Transcend SSD370 128GB PSU: Seasonic X-660 80+ Gold Case: Antec P110 Silent, 5 intakes 1 exhaust Monitor: AOC G2460PF 1080p 144Hz (150Hz max w/ DP, 121Hz max w/ HDMI) TN panel Keyboard: Logitech G610 Orion (Cherry MX Blue) with SteelSeries Apex M260 keycaps Mouse: BenQ Zowie FK1

 

Model: HP Omen 17 17-an110ca CPU: i7-8750H (0.125V core & cache, 50mV SA undervolt) GPU: GTX 1060 6GB Mobile (+80/+450, 1650MHz~1750MHz 0.78V~0.85V) RAM: 8+8GB DDR4-2400 18-17-17-39 2T Storage: HP EX920 1TB PCIe x4 M.2 SSD + Crucial MX500 1TB 2.5" SATA SSD, 128GB Toshiba PCIe x2 M.2 SSD (KBG30ZMV128G) gone cooking externally, 1TB Seagate 7200RPM 2.5" HDD (ST1000LM049-2GH172) left outside Monitor: 1080p 126Hz IPS G-sync

 

Desktop benching:

Cinebench R15 Single thread:168 Multi-thread: 833 

SuperPi (v1.5 from Techpowerup, PI value output) 16K: 0.100s 1M: 8.255s 32M: 7m 45.93s

Link to comment
https://linustechtips.com/topic/1060116-network-speed-settings/#findComment-12531442
Share on other sites
Link to post
Share on other sites
Posted
  • Author
2 minutes ago, mynameisjuan said:

I meant router. There are still a lot of routers with only 100 meg ports for LAN and a gig port for WAN. Whats the router model?

no they are 10/100/1000 and my switch indicated 1000 coming in but 100 going out (it is a gigabit switch) but i took it out now anyway

Link to comment
https://linustechtips.com/topic/1060116-network-speed-settings/#findComment-12531471
Share on other sites
Link to post
Share on other sites
Posted
  • Author

OH I FIXED IT! So I moved wy switch to every different wire segment that could be the point of failure, and I found which wire it was, fixed the ends (I learned to out the ends on a cat 5e cable when I was 9, am I cool yet) and i checked again and now it showed 1000 so it works!

Link to comment
https://linustechtips.com/topic/1060116-network-speed-settings/#findComment-12531482
Share on other sites
Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing Networking

×