Jump to content

Static Presure Fans

Starlord808
By Starlord808
in Cooling
 Share
Posted

SP120s are loud, I wont be putting them on my list

 

Maybe Noctua NF-A12x25, Phanteks MP fans and Fractal HP fans?

CPU: i7-2600K 4751MHz 1.44V (software) --> 1.47V at the back of the socket Motherboard: Asrock Z77 Extreme4 (BCLK: 103.3MHz) CPU Cooler: Noctua NH-D15 RAM: Adata XPG 2x8GB DDR3 (XMP: 2133MHz 10-11-11-30 CR2, custom: 2203MHz 10-11-10-26 CR1 tRFC:230 tREFI:14000) GPU: Asus GTX 1070 Dual (Super Jetstream vbios, +70(2025-2088MHz)/+400(8.8Gbps)) SSD: Samsung 840 Pro 256GB (main boot drive), Transcend SSD370 128GB PSU: Seasonic X-660 80+ Gold Case: Antec P110 Silent, 5 intakes 1 exhaust Monitor: AOC G2460PF 1080p 144Hz (150Hz max w/ DP, 121Hz max w/ HDMI) TN panel Keyboard: Logitech G610 Orion (Cherry MX Blue) with SteelSeries Apex M260 keycaps Mouse: BenQ Zowie FK1

 

Model: HP Omen 17 17-an110ca CPU: i7-8750H (0.125V core & cache, 50mV SA undervolt) GPU: GTX 1060 6GB Mobile (+80/+450, 1650MHz~1750MHz 0.78V~0.85V) RAM: 8+8GB DDR4-2400 18-17-17-39 2T Storage: HP EX920 1TB PCIe x4 M.2 SSD + Crucial MX500 1TB 2.5" SATA SSD, 128GB Toshiba PCIe x2 M.2 SSD (KBG30ZMV128G) gone cooking externally, 1TB Seagate 7200RPM 2.5" HDD (ST1000LM049-2GH172) left outside Monitor: 1080p 126Hz IPS G-sync

 

Desktop benching:

Cinebench R15 Single thread:168 Multi-thread: 833 

SuperPi (v1.5 from Techpowerup, PI value output) 16K: 0.100s 1M: 8.255s 32M: 7m 45.93s

Link to comment
https://linustechtips.com/topic/1053280-static-presure-fans/#findComment-12468137
Share on other sites
Link to post
Share on other sites
Posted
8 minutes ago, Starlord808 said:

I wanted to go with fractals HPs but I can’t find 120s anywhere except for Performance PCs 

https://www.outletpc.com/cq4868-fractal-design-fdfanventhp12pwmbk-venturi-venturi.html?utm_source=cq4868-fractal-design-fdfanventhp12pwmbk-venturi-venturi&utm_medium=shopping%2Bengine&utm_campaign=pcpartpicker&utm_content=Fractal Design%2B-%2BFans (Cooling) > Case Fans > 120mm Fans&sscid=41k3_7bu14

CPU: i7-2600K 4751MHz 1.44V (software) --> 1.47V at the back of the socket Motherboard: Asrock Z77 Extreme4 (BCLK: 103.3MHz) CPU Cooler: Noctua NH-D15 RAM: Adata XPG 2x8GB DDR3 (XMP: 2133MHz 10-11-11-30 CR2, custom: 2203MHz 10-11-10-26 CR1 tRFC:230 tREFI:14000) GPU: Asus GTX 1070 Dual (Super Jetstream vbios, +70(2025-2088MHz)/+400(8.8Gbps)) SSD: Samsung 840 Pro 256GB (main boot drive), Transcend SSD370 128GB PSU: Seasonic X-660 80+ Gold Case: Antec P110 Silent, 5 intakes 1 exhaust Monitor: AOC G2460PF 1080p 144Hz (150Hz max w/ DP, 121Hz max w/ HDMI) TN panel Keyboard: Logitech G610 Orion (Cherry MX Blue) with SteelSeries Apex M260 keycaps Mouse: BenQ Zowie FK1

 

Model: HP Omen 17 17-an110ca CPU: i7-8750H (0.125V core & cache, 50mV SA undervolt) GPU: GTX 1060 6GB Mobile (+80/+450, 1650MHz~1750MHz 0.78V~0.85V) RAM: 8+8GB DDR4-2400 18-17-17-39 2T Storage: HP EX920 1TB PCIe x4 M.2 SSD + Crucial MX500 1TB 2.5" SATA SSD, 128GB Toshiba PCIe x2 M.2 SSD (KBG30ZMV128G) gone cooking externally, 1TB Seagate 7200RPM 2.5" HDD (ST1000LM049-2GH172) left outside Monitor: 1080p 126Hz IPS G-sync

 

Desktop benching:

Cinebench R15 Single thread:168 Multi-thread: 833 

SuperPi (v1.5 from Techpowerup, PI value output) 16K: 0.100s 1M: 8.255s 32M: 7m 45.93s

Link to comment
https://linustechtips.com/topic/1053280-static-presure-fans/#findComment-12468190
Share on other sites
Link to post
Share on other sites
Posted
8 hours ago, BiG StroOnZ said:

Noctual NF-A14 industrialPPC-3000 - 10.52mmH2O

 

Noctua NF-F12 industrialPPC-3000 - 7.63mmH2O

Though it might be advisable to not opt for the 3000RPM versions and rather go with the a little less powerful 2000RPM version - your ears will be happier. You usually don't need those high rpms to keep your system in check and the 2000RPM versions haver lower minimum rpm.

Use the quote function when answering! Mark people directly if you want an answer from them!

Link to comment
https://linustechtips.com/topic/1053280-static-presure-fans/#findComment-12468877
Share on other sites
Link to post
Share on other sites
Posted
39 minutes ago, bowrilla said:

Though it might be advisable to not opt for the 3000RPM versions and rather go with the a little less powerful 2000RPM version - your ears will be happier. You usually don't need those high rpms to keep your system in check and the 2000RPM versions haver lower minimum rpm.

 

Yeah, I opted for the 2000 rpm versions myself, but figured I post the 3000 versions to remain factual. Although, with a fan curve or fan controller, the 3000's wouldn't be too bad.

 

 

https://linustechtips.com/topic/1381504-community-standards/

 

Link to comment
https://linustechtips.com/topic/1053280-static-presure-fans/#findComment-12469012
Share on other sites
Link to post
Share on other sites
Posted
1 minute ago, BiG StroOnZ said:

 

Yeah, I opted for the 2000 rpm versions myself, but figured I post the 3000 versions to remain factual. Although, with a fan curve or fan controller, the 3000's wouldn't be too bad.

They do have higher minimum rpms though. I never have to crank my A14 fans beyond 800 and regular loads I never have to go beyond 550 to keep the CPU at 28-32°C on one 280mm rad

Use the quote function when answering! Mark people directly if you want an answer from them!

Link to comment
https://linustechtips.com/topic/1053280-static-presure-fans/#findComment-12469018
Share on other sites
Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing Cooling

×