Help setting up RAID 0

[Cheex18]

I have a Gigabyte GA-Z170x Gaming 7 motherboard. 

I have a PCIE M.2 SSD in the M2H_32G M.2 slot so it can run at full speed, this is for Windows 10. I also have 2x Samsung EVO 500GB SSDs I would like to use for storage (RAID 0).

 

I have followed a guide that stated to:

1) put enable Windows 8/10 and disable CMS support, reboot

2) change sata mode select to Intel RST Premium

3) in Intel rapid storage technology configure the raid.

 

problem is I can no longer see the SSDs, I can still see the NVME drive I believe.

the manual that comes with the board shows screenshots that look nothing like i have because i've updated to F22M. 

 

Reference Video:  

 

 

[GDRRiley]

don't use raid on the motherboard do it in windows. 

[Cheex18]

Ok..... I must be old school raid is usually at the bios level, what form of wizardry is this you speak of. Do tell. 

[tp95112]

50 minutes ago, Cheex18 said:

Ok..... I must be old school raid is usually at the bios level, what form of wizardry is this you speak of. Do tell. 

Windows uses storage spaces

[kidroc666]

it's been around for a long time bro!!