Jump to content

Noctua NF-F12 PPC-3k vs Delta AFB1212H-R00

Compassionate Homicide
By Compassionate Homicide
in Cooling
 Share

NF-F12 iPPC 3k or AFB1212H-R00  

5 members have voted

  1. 1. What would you choose, and why?

    • Noctua NF-F12 iPPC-3000
      4
    • Delta AFB1212H-R00
      1

Posted

Trying to decide between the two as my main case intake fan. I need more positive pressure

 

Similar in specs -

 

Delta AFB1212H-R00:
Dual ball bearing
2500 RPM
82.67 cfm (140.5 m3/h)
6.25 mm/H20
38.5 dBA

 

Noctua NF-F12 iPPC-3000:
SSO2 bearing
3000 RPM
109.9 cfm (186.7 m3/h)
7.63 mm/H2O
43.5 dBA

 

The noctua moves slightly more air at full speed, but at 5dBA more in terms of loudness. My biggest question is whether there is a justifiable price, and sound level, difference between for the Noctua (about $5 USD more) for the SSO2 bearings, noise level and static pressure.

 

Looks are not of importance! I was looking for something a little better than the Noctua PPC-2000 in 120x25, and if I had to guess, the Noctua 3K would probably perform very similarly to the Delta at 2500RPM. Delta's have just as much a fantastic reputation concerning reliability. So, is the SSO2 bearing, extra 5dBA, 3-phase motor (does the Delta have 3-phase?) and extra $5 worth getting the Noctua ppc-3000? Delta's have just as much a fantastic reputation concerning reliability.

 

If someone could provide any kind of comparison graphs, it would be greatly appreciated, but I won't hold my breathe.

 

Thanks!

Never rub another man's rhubarb!

 

4.2225Ghz 1700x on air

cpu-z validation

Link to comment
Share on other sites
Link to post
Share on other sites
Posted

I don;t think noise is a problem, they are both loud as hell in their max speed anyway. Though sad that 10000RPM Delta fan isnt considered

CPU: i7-2600K 4751MHz 1.44V (software) --> 1.47V at the back of the socket Motherboard: Asrock Z77 Extreme4 (BCLK: 103.3MHz) CPU Cooler: Noctua NH-D15 RAM: Adata XPG 2x8GB DDR3 (XMP: 2133MHz 10-11-11-30 CR2, custom: 2203MHz 10-11-10-26 CR1 tRFC:230 tREFI:14000) GPU: Asus GTX 1070 Dual (Super Jetstream vbios, +70(2025-2088MHz)/+400(8.8Gbps)) SSD: Samsung 840 Pro 256GB (main boot drive), Transcend SSD370 128GB PSU: Seasonic X-660 80+ Gold Case: Antec P110 Silent, 5 intakes 1 exhaust Monitor: AOC G2460PF 1080p 144Hz (150Hz max w/ DP, 121Hz max w/ HDMI) TN panel Keyboard: Logitech G610 Orion (Cherry MX Blue) with SteelSeries Apex M260 keycaps Mouse: BenQ Zowie FK1

 

Model: HP Omen 17 17-an110ca CPU: i7-8750H (0.125V core & cache, 50mV SA undervolt) GPU: GTX 1060 6GB Mobile (+80/+450, 1650MHz~1750MHz 0.78V~0.85V) RAM: 8+8GB DDR4-2400 18-17-17-39 2T Storage: HP EX920 1TB PCIe x4 M.2 SSD + Crucial MX500 1TB 2.5" SATA SSD, 128GB Toshiba PCIe x2 M.2 SSD (KBG30ZMV128G) gone cooking externally, 1TB Seagate 7200RPM 2.5" HDD (ST1000LM049-2GH172) left outside Monitor: 1080p 126Hz IPS G-sync

 

Desktop benching:

Cinebench R15 Single thread:168 Multi-thread: 833 

SuperPi (v1.5 from Techpowerup, PI value output) 16K: 0.100s 1M: 8.255s 32M: 7m 45.93s

Link to comment
Share on other sites
Link to post
Share on other sites
Posted
  • Author
18 minutes ago, Jurrunio said:

Though sad that 10000RPM Delta fan isnt considered

Is it 120x25mm? Does it have comparable static pressure? If so, please provide a link and I'll be glad to look into that.

 

I can only have 120x25mm in this fan location, and it needs to be high static pressure/flow, as my exhaust is a 120x38 Delta AFB1212HHE-F00 (120cfm/9mmH2O).

Never rub another man's rhubarb!

 

4.2225Ghz 1700x on air

cpu-z validation

Link to comment
Share on other sites
Link to post
Share on other sites
Posted
28 minutes ago, Compassionate Homicide said:

Is it 120x25mm? Does it have comparable static pressure? If so, please provide a link and I'll be glad to look into that.

 

I can only have 120x25mm in this fan location, and it needs to be high static pressure/flow, as my exhaust is a 120x38 Delta AFB1212HHE-F00 (120cfm/9mmH2O).

I'm just joking, that fan overloads any fan header on a consumer grade motherboard

CPU: i7-2600K 4751MHz 1.44V (software) --> 1.47V at the back of the socket Motherboard: Asrock Z77 Extreme4 (BCLK: 103.3MHz) CPU Cooler: Noctua NH-D15 RAM: Adata XPG 2x8GB DDR3 (XMP: 2133MHz 10-11-11-30 CR2, custom: 2203MHz 10-11-10-26 CR1 tRFC:230 tREFI:14000) GPU: Asus GTX 1070 Dual (Super Jetstream vbios, +70(2025-2088MHz)/+400(8.8Gbps)) SSD: Samsung 840 Pro 256GB (main boot drive), Transcend SSD370 128GB PSU: Seasonic X-660 80+ Gold Case: Antec P110 Silent, 5 intakes 1 exhaust Monitor: AOC G2460PF 1080p 144Hz (150Hz max w/ DP, 121Hz max w/ HDMI) TN panel Keyboard: Logitech G610 Orion (Cherry MX Blue) with SteelSeries Apex M260 keycaps Mouse: BenQ Zowie FK1

 

Model: HP Omen 17 17-an110ca CPU: i7-8750H (0.125V core & cache, 50mV SA undervolt) GPU: GTX 1060 6GB Mobile (+80/+450, 1650MHz~1750MHz 0.78V~0.85V) RAM: 8+8GB DDR4-2400 18-17-17-39 2T Storage: HP EX920 1TB PCIe x4 M.2 SSD + Crucial MX500 1TB 2.5" SATA SSD, 128GB Toshiba PCIe x2 M.2 SSD (KBG30ZMV128G) gone cooking externally, 1TB Seagate 7200RPM 2.5" HDD (ST1000LM049-2GH172) left outside Monitor: 1080p 126Hz IPS G-sync

 

Desktop benching:

Cinebench R15 Single thread:168 Multi-thread: 833 

SuperPi (v1.5 from Techpowerup, PI value output) 16K: 0.100s 1M: 8.255s 32M: 7m 45.93s

Link to comment
Share on other sites
Link to post
Share on other sites
Posted
  • Author
5 minutes ago, Jurrunio said:

I'm just joking, that fan overloads any fan header on a consumer grade motherboard

That def wont work...need less than 1A current draw. But only 1k RPM? My curiosity is still intrigued.

 

Never rub another man's rhubarb!

 

4.2225Ghz 1700x on air

cpu-z validation

Link to comment
Share on other sites
Link to post
Share on other sites
Posted
13 minutes ago, Compassionate Homicide said:

That def wont work...need less than 1A current draw. But only 1k RPM? My curiosity is still intrigued.

 

no, 10k (or is it 11k?) RPM. Linus tested it and called it blowie matron

 

CPU: i7-2600K 4751MHz 1.44V (software) --> 1.47V at the back of the socket Motherboard: Asrock Z77 Extreme4 (BCLK: 103.3MHz) CPU Cooler: Noctua NH-D15 RAM: Adata XPG 2x8GB DDR3 (XMP: 2133MHz 10-11-11-30 CR2, custom: 2203MHz 10-11-10-26 CR1 tRFC:230 tREFI:14000) GPU: Asus GTX 1070 Dual (Super Jetstream vbios, +70(2025-2088MHz)/+400(8.8Gbps)) SSD: Samsung 840 Pro 256GB (main boot drive), Transcend SSD370 128GB PSU: Seasonic X-660 80+ Gold Case: Antec P110 Silent, 5 intakes 1 exhaust Monitor: AOC G2460PF 1080p 144Hz (150Hz max w/ DP, 121Hz max w/ HDMI) TN panel Keyboard: Logitech G610 Orion (Cherry MX Blue) with SteelSeries Apex M260 keycaps Mouse: BenQ Zowie FK1

 

Model: HP Omen 17 17-an110ca CPU: i7-8750H (0.125V core & cache, 50mV SA undervolt) GPU: GTX 1060 6GB Mobile (+80/+450, 1650MHz~1750MHz 0.78V~0.85V) RAM: 8+8GB DDR4-2400 18-17-17-39 2T Storage: HP EX920 1TB PCIe x4 M.2 SSD + Crucial MX500 1TB 2.5" SATA SSD, 128GB Toshiba PCIe x2 M.2 SSD (KBG30ZMV128G) gone cooking externally, 1TB Seagate 7200RPM 2.5" HDD (ST1000LM049-2GH172) left outside Monitor: 1080p 126Hz IPS G-sync

 

Desktop benching:

Cinebench R15 Single thread:168 Multi-thread: 833 

SuperPi (v1.5 from Techpowerup, PI value output) 16K: 0.100s 1M: 8.255s 32M: 7m 45.93s

Link to comment
Share on other sites
Link to post
Share on other sites
Posted
  • Author
Just now, Jurrunio said:

no, 10k (or is it 11k?) RPM. Linus tested it and called it blowie matron

 

Ah yes, the blowiematron! Having my own 120VAC, 140mm, "blowiematron", I'm pretty sure that Linus' isn't a 12vdc fan.

I misread you're first post and thought it said "1000RPM". I wondered how a 120mm 1000RPM fan would outperform a 2500-3000 RPM fan.

Never rub another man's rhubarb!

 

4.2225Ghz 1700x on air

cpu-z validation

Link to comment
Share on other sites
Link to post
Share on other sites
Posted
3 minutes ago, Compassionate Homicide said:

I wondered how a 120mm 1000RPM fan would outperform a 2500-3000 RPM fan.

If I can invent that I could easily not go to work ever again :P 

CPU: i7-2600K 4751MHz 1.44V (software) --> 1.47V at the back of the socket Motherboard: Asrock Z77 Extreme4 (BCLK: 103.3MHz) CPU Cooler: Noctua NH-D15 RAM: Adata XPG 2x8GB DDR3 (XMP: 2133MHz 10-11-11-30 CR2, custom: 2203MHz 10-11-10-26 CR1 tRFC:230 tREFI:14000) GPU: Asus GTX 1070 Dual (Super Jetstream vbios, +70(2025-2088MHz)/+400(8.8Gbps)) SSD: Samsung 840 Pro 256GB (main boot drive), Transcend SSD370 128GB PSU: Seasonic X-660 80+ Gold Case: Antec P110 Silent, 5 intakes 1 exhaust Monitor: AOC G2460PF 1080p 144Hz (150Hz max w/ DP, 121Hz max w/ HDMI) TN panel Keyboard: Logitech G610 Orion (Cherry MX Blue) with SteelSeries Apex M260 keycaps Mouse: BenQ Zowie FK1

 

Model: HP Omen 17 17-an110ca CPU: i7-8750H (0.125V core & cache, 50mV SA undervolt) GPU: GTX 1060 6GB Mobile (+80/+450, 1650MHz~1750MHz 0.78V~0.85V) RAM: 8+8GB DDR4-2400 18-17-17-39 2T Storage: HP EX920 1TB PCIe x4 M.2 SSD + Crucial MX500 1TB 2.5" SATA SSD, 128GB Toshiba PCIe x2 M.2 SSD (KBG30ZMV128G) gone cooking externally, 1TB Seagate 7200RPM 2.5" HDD (ST1000LM049-2GH172) left outside Monitor: 1080p 126Hz IPS G-sync

 

Desktop benching:

Cinebench R15 Single thread:168 Multi-thread: 833 

SuperPi (v1.5 from Techpowerup, PI value output) 16K: 0.100s 1M: 8.255s 32M: 7m 45.93s

Link to comment
Share on other sites
Link to post
Share on other sites
Posted

Do you worth Noctua's 6 years warranty over the Delta fan?

My system specs:

Spoiler

CPU: Intel Core i7-8700K, 5GHz Delidded LM || CPU Cooler: Noctua NH-C14S w/ NF-A15 & NF-A14 Chromax fans in push-pull cofiguration || Motherboard: MSI Z370i Gaming Pro Carbon AC || RAM: Corsair Vengeance LPX DDR4 2x8Gb 2666 || GPU: EVGA GTX 1060 6Gb FTW2+ DT || Storage: Samsung 860 Evo M.2 SATA SSD 250Gb, 2x 2.5" HDDs 1Tb & 500Gb || ODD: 9mm Slim DVD RW || PSU: Corsair SF600 80+ Platinum || Case: Cougar QBX + 1x Noctua NF-R8 front intake + 2x Noctua NF-F12 iPPC top exhaust + Cougar stock 92mm DC fan rear exhaust || Monitor: ASUS VG248QE || Keyboard: Ducky One 2 Mini Cherry MX Red || Mouse: Logitech G703 || Audio: Corsair HS70 Wireless || Other: XBox One S Controler

My build logs:

 

Link to comment
Share on other sites
Link to post
Share on other sites
Posted

I dislike noise, I like my rig to sound like a mac box and it does.  :)  I got no time for jet landings in my studio...hehe

Asus Sabertooth x79 / 4930k @ 4500 @ 1.408v / Gigabyte WF 2080 RTX / Corsair VG 64GB @ 1866 & AX1600i & H115i Pro @ 2x Noctua NF-A14 / Carbide 330r Blackout

Scarlett 2i2 Audio Interface / KRK Rokits 10" / Sennheiser HD 650 / Logitech G Pro Wireless Mouse & G915 Linear & G935 & C920 / SL 88 Grand / Cakewalk / NF-A14 Int P12 Ex
AOC 40" 4k Curved / LG 55" OLED C9 120hz / LaCie Porsche Design 2TB & 500GB / Samsung 950 Pro 500GB / 850 Pro 500GB / Crucial m4 500GB / Asus M.2 Card

Link to comment
Share on other sites
Link to post
Share on other sites
Posted

Also Delta fans draws too much current out of the fan headers afaik.. You can't use multiple of them on 1 header using a splitters, otherwise you might kill the motherboard..

My system specs:

Spoiler

CPU: Intel Core i7-8700K, 5GHz Delidded LM || CPU Cooler: Noctua NH-C14S w/ NF-A15 & NF-A14 Chromax fans in push-pull cofiguration || Motherboard: MSI Z370i Gaming Pro Carbon AC || RAM: Corsair Vengeance LPX DDR4 2x8Gb 2666 || GPU: EVGA GTX 1060 6Gb FTW2+ DT || Storage: Samsung 860 Evo M.2 SATA SSD 250Gb, 2x 2.5" HDDs 1Tb & 500Gb || ODD: 9mm Slim DVD RW || PSU: Corsair SF600 80+ Platinum || Case: Cougar QBX + 1x Noctua NF-R8 front intake + 2x Noctua NF-F12 iPPC top exhaust + Cougar stock 92mm DC fan rear exhaust || Monitor: ASUS VG248QE || Keyboard: Ducky One 2 Mini Cherry MX Red || Mouse: Logitech G703 || Audio: Corsair HS70 Wireless || Other: XBox One S Controler

My build logs:

 

Link to comment
Share on other sites
Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing Cooling

×