Jump to content

Is my hardware good enough?

ZcanKal

I may be in way over my head here, I want to virtualize my computer into 2 computers, and I had a couple questions about the hardware and software behind it.
I have a 5800k APU and an R7 260x with 8 gigabytes of DDR3.  Is my hardware good enough for virtualization?
I'm not sure if you can split integrated graphics with dedicated graphics.
Do I need 2 separate operating systems on different drives or if 1 drive and a some virtual boxes?
How does one split USB ports between the different OS'?

Yes, you have my permission to call me lacking in knowledge about these things.

Link to comment
Share on other sites

Link to post
Share on other sites

You can use virtualization, but each machine will run at half the original speed, as if it wasnt slow enough

CPU: i7-2600K 4751MHz 1.44V (software) --> 1.47V at the back of the socket Motherboard: Asrock Z77 Extreme4 (BCLK: 103.3MHz) CPU Cooler: Noctua NH-D15 RAM: Adata XPG 2x8GB DDR3 (XMP: 2133MHz 10-11-11-30 CR2, custom: 2203MHz 10-11-10-26 CR1 tRFC:230 tREFI:14000) GPU: Asus GTX 1070 Dual (Super Jetstream vbios, +70(2025-2088MHz)/+400(8.8Gbps)) SSD: Samsung 840 Pro 256GB (main boot drive), Transcend SSD370 128GB PSU: Seasonic X-660 80+ Gold Case: Antec P110 Silent, 5 intakes 1 exhaust Monitor: AOC G2460PF 1080p 144Hz (150Hz max w/ DP, 121Hz max w/ HDMI) TN panel Keyboard: Logitech G610 Orion (Cherry MX Blue) with SteelSeries Apex M260 keycaps Mouse: BenQ Zowie FK1

 

Model: HP Omen 17 17-an110ca CPU: i7-8750H (0.125V core & cache, 50mV SA undervolt) GPU: GTX 1060 6GB Mobile (+80/+450, 1650MHz~1750MHz 0.78V~0.85V) RAM: 8+8GB DDR4-2400 18-17-17-39 2T Storage: HP EX920 1TB PCIe x4 M.2 SSD + Crucial MX500 1TB 2.5" SATA SSD, 128GB Toshiba PCIe x2 M.2 SSD (KBG30ZMV128G) gone cooking externally, 1TB Seagate 7200RPM 2.5" HDD (ST1000LM049-2GH172) left outside Monitor: 1080p 126Hz IPS G-sync

 

Desktop benching:

Cinebench R15 Single thread:168 Multi-thread: 833 

SuperPi (v1.5 from Techpowerup, PI value output) 16K: 0.100s 1M: 8.255s 32M: 7m 45.93s

Link to comment
Share on other sites

Link to post
Share on other sites

I'm going to be honest here, it's the fastest computer I got for now.

Link to comment
Share on other sites

Link to post
Share on other sites

Welcome to community of virtualization. 

 

for VM's you don't need several storage devices. You could have several Virtualized OS's on a single storage device, As most virtualization software such as VMware and VirtualBox create "virtual" storage devices on 1 storage device. Though if you want you can dedicate a whole storage device for each VM.

 

If you are looking setup you computer only for virtualization then I would recommend installing proxmox as it is open source and allows for advanced control over your virtual machines. This is not necessary by any means just allows more advanced control.

 

You can dedicate dedicated graphics devices to a specific VM if you are using a host OS that was made for virtualization and supports it.

 

USB pass though with physical devices to VMs is sometimes confusing and all depends on the software you are running. In most windows based solutions you can use the same keyboard and mouse for several VMs but USB WiFi adapters, storage devices, and sounds devices you have to choose weather you want it to be a host only device or chose the VM that it will be passed through to.

Edited by cj7s1
Link to comment
Share on other sites

Link to post
Share on other sites

13 minutes ago, cj7s1 said:

Welcome to community of virtualization. 

 

for VM's you don't need several storage devices. You could have several Virtualized OS's on a single storage device, As most virtualization software such as VMwarevirt and VirtualBox create "virtual" storage devices on 1 storage device. Though if you want you can dedicate a whole storage device for each VM.

 

If you are looking setup you computer only for virtualization then I would recommend installing proxmox as it is open source and allows for advanced control over your virtual machines. This is not necessary by any means just allows more advanced control.

 

You can dedicate dedicated graphics devices to a specific VM if you are using a host OS that was made for virtualization and supports it.

 

USB pass though with physical devices to VMs is sometimes confusing and all depends on the software you are running. In most windows based solutions you can use the same keyboard and mouse for several VMs but USB WiFi adapters, storage devices, and sounds devices you have to choose weather you want it to be a host only device or chose the VM that it will be passed through to.

Thank you for answering my questions.  I may have more questions in the future but for now, I'm just messing around for fun (yes, I do this for the heck of it.)

Link to comment
Share on other sites

Link to post
Share on other sites

3 minutes ago, ZcanKal said:

Thank you for answering my questions.  I may have more questions in the future but for now, I'm just messing around for fun (yes, I do this for the heck of it.)

Feel free to message me for any questions you have. :)

Link to comment
Share on other sites

Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

×