Search the Community
Showing results for tags 'ip'.
-
Hi all, in the past I had the USG with cloudKey Gen1 V2 and I had some trouble to get an IP assigned to my Denon AVR X1300W. I was always able to access the device without problems, although it never showed up as a client in the client list. Now a couple of weeks ago I transferred my setup onto the Gateway Ultra, Really happy with the whole setup but now again I cannot get my AVR onto the network, I keep getting an IP 169.254.112.202 what I understand is that this means the DHCP server is not able to assign a correct IP address. I have a default setup with 192.168.86.0/24 I tried setting UPnP and also port forwarding several Ports listed on the Denon website, but without results. Can anybody point me in the right direction. I find it strange that when I reconnect to my USG or I connect my AVR to My ISP Router, I get an IP directly. So It has to be some setting inside the Gateway Ultra I.M.O. please let me know what I need to provide to get the correct help
-
So I have a client who has different branches of his shop and wants to install IP telephones and want them to be able to dial each other? how to make them appear as if they are on the same network also do I need another router in each branch to create a virtual LAN? also another question? what is a SIP account what does it affect? because some phones have 2,4,6 etc sip accounts also do I need a pbx ? I didn't install IP telephones before but I troubleshooted some Thanks, -
Hi everyone, So recently I was going through my router to understand some of the settings. Its a TP-Link router (model TL-WR940N). I noticed on the Status page that there is this secondary connection with its own IP address. I understand the IP address of LAN and WAN parts but what is the point of the Secondary connection and the IP it provides? LAN MAC Address: 60-xx-xx-xx-xx-xx IP Address: 192.168.x.x Subnet Mask: 255.xxx.xxx.x WAN MAC Address: 60-xx-xx-xx-xx-xx IP Address: 100.xx.xxx.xx PPPoE(Connect Automatically) Subnet Mask: 255.xxx.xxx.xxx Default Gateway: 113.xxx.xxx.xxx DNS Server: 192.xxx.xx.xx , 192.xxx.xx.xx Online Time: 1 day(s) 01:33:20 Secondary Connection IP Address: 10.xx.xx.xx Dynamic IP Subnet Mask: 255.xxx.xxx.x
-
So im looking at building my own offline security camera system using POE, and having it feed to a computer from switch to pc directly, and using a program to stream and record all the foods from the IPCameras, im wanting to have upwards of maybe 12? cameras, what kind of system would i need for something like this?
-
Since Wednesday afternoon when I got home the internet connection on my PC drops out. The wifi connection itself is fine and it says it's connected but there's no internet. I've tried releasing and renewing my IP addresses and DHCP, turned off wifi 6, tried turning off IPv6 but that just stopped it working completely as well as setting a manual IP address. Running windows troubleshooting sometimes fixes it after it resets the adaptor but it comes back again after a few minutes or wont work and says "Wifi doesn't have a valid IP configuration". I've also reset my PC, unplugged the wifi card and plugged it back in but no luck and I'm getting to my wit's end on this! If anyone would have some tips or be able to point me in the right direction it would be much appreciated . My PC has as Asus AX3000 pcie wifi 6 & Bluetooth 5 card which is connected to a TP-Link Deco A20. I know it's not the wifi router as every other device in my home works perfectly on it and my PC has been working fine for months on this network with no changes or updates when the issue happened. Running speed tests they're usually at my standard speed of 120mbps down and 40 up but then it randomly drops out. I'm 90% sure it's something to do with IP. I was running nicehash when the network issue happened but resetting my computer should have fixed anything it would have changed right? Thanks so much if you can help at all. -
I have a device that has a ip of something of something like 189.234.54.22, but I'm trying to be able to map that device on a network that uses a 192.168.X.X. Is there a way to be able to access that device on the network mapping its ip to 192.168 network using some static ip trickery? This is for a Dairy we use a EZ-feed Radio that has that static ip that we keep just plugged into a second ethernet port on a pc so the applicatio we use for it can see it. My goal is to have all the computers in the office be able to see it.
-
I had a Tp-link router, WR841N, a very basic router. My Xiaomi camera had no issue connecting to it, but it doesn't seem to work on a newer model Tp-link Archer C20 router. The wifi bars in the Xiaomi Home app are greyed out when the C20 router is listed. Is there a way to get the camera to work on my current router? does the camera have issues with some routers in particular?
-
Hi, I did the IPv4 addressing tasks, but I don't know if it's okay and I haven't done all of them. Could you please show me how to make the ones I don't have? Exercise 2. The given IP address is in the form: 172.16.34.200 and the mask 172.16.34.200. Based on this data, calculate: network address, broadcast address, number of hosts, address of the first and last host. Calculating the network address We convert the IP address and the mask into binary form. Decimal form Binary form IP address 172.16.34.200 10101100 10000 100010 11001000 Hood 172.16.34.200 10101100 10000 100010 11001000 We perform the AND operation on the obtained binary numbers (i.e. we multiply the numbers in the columns): ………………………………………………………………………………………………………… ………………………………………………………………………………………………………… ………………………………………………………………………………………………………… We get a binary, which we write in decimal form: Received binary form Decimal form 10101100 10000 100010 11001000 172.16.34.200 Our network address: ………………………………………………………………………………………………………… Calculation of the broadcast address On the binary form of the mask, we perform the NOT logical operation (ones are changed to zeros and zeros to ones) …………………………………………………………………………………………………………………………………… ……………………………………………………………………………………………… ………………………………………………………………………………………………………………… We get a binary number: ………………………………………………………………………………………………………………… And we convert it to a decimal: ………………………………………………………………………………………………………………… We add the obtained decimal number to the network address: …………………………………………………………………………………………………………………………………… …………………………………………………………………………………………………………………………………… ………………………………………………………………………… .. The broadcast address is: ……………………………………………………………………………………………………………… .. We calculate the maximum number of hosts in the network: We use the formula to calculate the maximum number of hosts in the network / the shortened form of the mask is the number of ones in its binary form / …………………………………………………………………………………………………………………………………… …………………………………………………………………………………………………………………………………… …………………………………………………………………………………………………………………………………… …………………………………………………………………………………………………………… .. We indicate the address of the first and last host on the network If the network address is: ………………………………………………………………………………………………………………… then the address of the first host is: ………………………………………………………………………………………………………………… If the broadcast address is: ………………………………………………………………………………………………………………… then the address of the last host is: ………………………………………………………………………………………………………………… Answers: Network address: …………………………………………………………………………………………………… Broadcast address: ……………………………………………………………………………………… .. Number of hosts: …………………………………………………………………………………… ............... .. First host: ………………………………………………………………………………………………… Last host: ………………………………………………………………………………………………… .. Exercise 3. Convert to binary: Net mask: 255. 255. 255. 192 Network address 1: 192. 168. 1. 0 Broadcast 1: 192. 168. 1. 63 First computer: 192. 168. 1. 1 Last computer: 192. 168. 1. 62 Net mask: ……………………………………………………… Network address 1: ………………………………………………………. Broadcast 1: ………………………………………………………. First computer: ……………………………………………………… Last computer: ……………………………………………………… .. -
_full.1045607.thumb.jpg.cb4a02a98d6e47657bdd96261ffa2a44.jpg)
In short, So I'm using vmware workstation pro to running my virtual machine. The host system is running win 10 and my 2 VMs running windows 11. Both of my virtual machine have different local IP addresses from each other and the host system. But I notice that their public IP address is same with my host system. What I want 1. All my VMs have different public IP adress (to host system and each other) Any solution?- 7 replies
-
- 1
-
.png)
-
- virtual machine
- internet
- (and 3 more)
-
So about a month ago my ISP reset my router (can't remember what for) and it in a way broke my FreeNAS box. Whenever I boot it, it doesn't give me an IP through DCHP. I tried making it static, it accepted it but then it doesn't give me the message of "The web user interface is at http://192.168.0.48" It just gives me that, I honestly have no clue what to do to fix it, I've tried to set it in every way possible (to my knowledge). FreeNAS-11.3-U5 is the version that's currently running If any additional information is needed, I got you. I just want my NAS back up and running after everything I went through with it.
-
The backstory here is quite long but I'll try to keep it short. Basically, my new internet connection got installed today. Because I already had a good router lying around, I ordered a modem (Zyxel VMG1312-B30A) to use it with the new connection. While setting up the modem I encountered a problem where I can't access its web interface, which is needed to finish the setup process. Some googling later, it looks like it has a "special" firmware version installed that blocks the access to this web interface. To install the new firmware, I have to give my PC a static IP. But, (and here come's my acual question), besides the IP itself (192.168.1.1), Windows also wants to know the subnet prefix length, a gateway and a preferred DNS, and I have absolutely no clue what's supposed to go there or what that even is. I fear that this isn't a simple question to answer, but as I said, I know too little about networking to say for sure. (I live in Germany and the ISP is o2, idk if that helps or makes things more difficult xD) Thanks in advance to anyone willing to help! -
After prefroming a port foward for a Minecraft server the internet on my PC stopped working but worked on everything else, I deleted the port to see if it would help and it did not , I even factory reset my pc and that did not help either, I have tried all the cmd commands listed everywhere, preformed a clean boot, basically everything every video says to do to fix this problem and nothing works, please help.
-
I just factory reset my windows 11 and only installed Brave browser and GlassWire. After 3 minutes of running it detected a connection from the OS to a Chinese IP adress. It seems pretty sus in my opinion... Is it normal?
-
When does pinging the loopback address become relevant for trouble shooting? This one dude claimed it can be pinged to see if the NIC adapter itself is working, but I'm not sure how true that is.
-
So I wanted to try and start a Terraria Server with my friends because I felt that it would be easier if my friends got on when they wanted to and not need me to do it. So I followed a guide that pointed me to the ip for my network provider (Frontier) and I went into the Firewall Section, then into Port Fowarding, logged in and basically followed what the guide told me So after I followed that step, Immediately after my Lan connection stopped working. Thankfully my rig has wifi that I can use but it makes it a pain as it can randomly disconnect and my ping can be very explosive. From my troubleshooting, I figured out that the Lan cable works with a separate computer I have from a lended friend and the connection works just fine. I decided to reinstall windows 10 in the hope of fixing the issue but it has done nothing. I'm left very confused on where to go from here so any help would be greatly appreciated. I have also followed the process of opening CMD as an administrator following the process of Netsh... to try and I guess reset the ip but it hasn't done anything after I've restarted. -
I am settings up a raspberry pi cluster and running VMware on it. I am planning on running a few virtual machines in order to run a script I made. Long story short, I need each system to run on a separate internet connection and IP address (Ideally an IP address that will stay constant). I've thought about using Linode but I have never used it and I'm not sure what to expect. I've also looked into Deeper Network p2p decentralized hardware VPN's, but I do not think that will fit my use case. Any suggestions? Thanks! :D -
I have 2 PCs that are connected to a switch that is an unmanaged switch. I am having an issue where they have the same public IP, I need the second computer to have a diff public IP. I have tried releasing and renewing the IP through CMD and unplugging my router for 30 mins, nothing work. Any solutions?
-
Hello everyone I had 80TB of empty space thanks to chia. So I decided to create a personal cloud with TrueNAS core, and I installed nextcloud. Inside my home-network everything is great. But my problem is when I'm not on my home network. I try to install zerotier on my TrueNAS, but fail at it. What could I do to acces my TrueNAS remotely
-
Me, being a dumb and interested 14 year old boy decided to try out some fortnite hacks on an alt account. Guess the spoofer didn't work to well because I've been banned on my main account I've had for 4 years. It lets me launch fortnite and run a game for a few minutes but I get kicked with the error message I provided below. Can someone please tell how to fix this or at least guide in me in what type of ban it is? thank you.
-
ROUTER: Asus rt-ac65p Is there some way to open the same ports on 2 different IPs/PCs? Example i want to open the teamspeak ports on 2 pc, so if one fails, i have another running.
-
Hello, I've got a small media-server at home which seams to be a widely used target for brute-force attacks. I've tried to secure it a bit with the following tweaks. - Disallow RDP access for admin accounts - Use custom port for RDP - Require strong passwords - Account Lockout on X failed attempts - Scan logs every x min for failed attempts and then block IPs in the firewall I know that I should probably only allow local connections and use a VPN-solution, but I want to be able to quickly and easily connect even from a friends house without any extra hustle. My idea is that I want to block all IPs that's not in my country range as well as block IP's within that range that have x failed login attempts. So, I've setup a firewall rule to block all incoming connections from (placeholder). I then add IPs to the placeholder with a powershell script every x min if the script find 5+ failed login attempts from an IP. .. But how would I go about blocking all incoming connections from an IP that is not within my defined range on-top of that?
-
I have a camera in a building which I would like to turn into some sort of rtsp stream, so I can view it from my house in vlc. How do I take a sdi/hdmi video feed and turn it into a video(rtsp) stream. Do i need a computer or are there some sort of box available.
-
I've read on the internet that you do not explicitly tell the DHCP server to give out alternative DNS servers then it will hand off what the router itself is using, that will make the router cache them, resulting in marginal performance increase. But DNS Benfhmark always says: " System has only ONE (router based) nameserver configured. It appears that only one local (router gateway) DNS nameserver, with the IP address of [192.168.x.x], is currently providing all DNS name resolution services to this system. This configuration is not recommended because most consumer-grade routers provide inefficient and under-powered DNS resolution services. Unless the DNS resolvers your router is using is under your control, it may not be providing the best or complete name resolution services. Users of GRC's DNS Spoofability system have determined that consumer-grade routers can be crashed by the receipt of specific DNS reply packets from the Internet. This opens the possibility that Internet-based criminals could acquire access to your router from the Internet as well as to the private network in controls. Many consumer-grade routers fail to provide the full range of DNS lookup services. This may have been detected by the benchmark and noted below. Recommended Actions: Unless you have some specific reason not to, you should give serious thought to disabling your router's provisioning of DNS services (which it is providing for all computers on your local network). After this is done, a fresh reboot of your computers will likely reveal the multiple DNS nameservers provided by your ISP. This is a superior configuration, without an under-powered router acting as a incompetent middleman and impeding all DNS access. This is contradictory information, what do you guys think? How do you use it?
-
so... the story starts like this... We moved to a new apartment, and the original router (a tp link 8690, which I think is a China exclusive?) was struggling as the interference from neighbouring wifis are too strong (I'm in China, okay?). So we got another router, a Huawei A2 pro, and we then found out(the hard way) that it is slightly better than the first one, but I only have around 60mbs in my room (via wifi), so we dropped the old router into the setup, using the bridging facility on the tplink, which works (as I understand it) by connecting to the main network, and just sending all of the things that are accessed via this router to the Huawei, kind of like a middleman. Then, when I was just trying to do some port forwarding for freenas, I couldn't find the ips for both the tplink nor the devices connected to it. sooo. . . any suggestions?
-
hello there, i have a little problem because my LAN speed and consistency is absurdly bad i switched to wlan and its way better but here is my situation we have a router the main one lets call it 1 we have a repeater lets call it 2 i can connect to 2 everytime but i have some ping problems when using it so its better to use 1 i cant connect to one because its everytime stuck with "authentificating" and sometimes there is "cant connect to network" it ONLY works when i delete the WLAN profile with cmd netsh wlan delete profile name= " " and then it works and i can connect. when i restart my computer its the same again doesnt work again i can everytime connect to the repeater but not to the main one. appreciate ur help and stay safe thanks
.png)
_full.1045607.thumb.jpg.cb4a02a98d6e47657bdd96261ffa2a44.jpg)
