IziBartek

Check if the fans are damaged, if the fan is damaged it might be heavier on one side causing it to bounce and vibrate while spinning.

Try plugging the pump into the CPU_FAN header and seeing if it'll boot. Either way, there's a chance your pump is dead.

I've seen a ton of Kraken X62 pump failures, even DOA ones. I'm not calling it as a dead pump, just saying there's a possibility as it seems to be somewhat common on X62s. Again, try plugging the pump into the CPU_FAN header and see what happens.

Can you feel any vibrations on the pump head?

Sounds like it might be a dead pump. Do you have another cooler of any kind that you can test to rule out a faulty fan header?

See what happens if you use that instead of the X62. If it behaves the same, it might be a problem with the board.

Nah

What's going on?

At idle? Might be a problem with thermal compound. Or Intel's bad stock TIM under the CPU's IHS

You might have to delid and replace the stock TIM, or on-die cool it.

RIP. All I can really say is delid and hope for the best. On-die cooling would also be something to try, just make sure your thermal compound isn't conductive.

You dudes need to stop commenting on stuff you clearly know very little of.
 
amazon.de has plenty of sellers that ship internationally.
google how many countries in the EU who uses Euro.
We’re a lot more countries in the EU than those two. Around 25-30 if I recall.
shipping can be less expensive from the UK. It all depends.

https://pcpartpicker.com/list/vFBD6X

Change the motherboard to the Prime Pro, and the PSU to something like the Focus Plus Gold.
And maybe the AiO to a 280mm, or a decent air cooler 

Yeah, looks good.

Looks pretty good

Yeah, looks good.

There is many more cons to 4k gaming monitors than there is pros. Personally I would go for the 1440p.

You'll have to decrypt and break down all the parts and pieces of the software, figure out a way to reverse engineer the OS to be compatible with standard hardware, and then hope you don't get sued into oblivion when you release it.

I've been trying to record w/ shadow play and every time i save the last 10 minutes and review the video there is no game sound and i cannot hear my friends in the background either only my microphone.

if i turn it up then it will be loud  that's why its turned down but that could be the reason why

system audio is 100% but my volume mixer is turned down to 2

Hi there!
I'm planning to build a video editing PC and I'd like to hear your opinion about this setup.
 
MOBO: ASUS PRIME X370-PRO (mainly for upgradeability for later and the USB-C port)
CPU: AMD Ryzen 5 1600X
GPU: GIGABYTE GeForce GTX 1050 Ti 4GB
RAM: Corsair Vengeance LPX 16GB (2x8GB) DDR4 2666MHz
PSU: Corsair - CXM (2015) 450W 80+ Bronze
Cooler: be quiet! - Pure Rock Slim 35.1 CFM
Case: I already have an older one wich will be fine.
 
I have around a 1000$ for the build. I want to be able to edit 4K videos (even if it is with 1080p proxies), but later I really wanna learn color grading wich process heavily relies on the GPU.
 

Change the PSU to this: 
PCPartPicker part list / Price breakdown by merchant
Power Supply: Corsair - CX (2017) 550W 80+ Bronze Certified ATX Power Supply  ($29.99 @ Newegg) 
Total: $29.99
Prices include shipping, taxes, and discounts when available
Generated by PCPartPicker 2017-11-22 17:06 EST-0500

I'd say go to a ryzen 5 1600 and a gtx 1060 3 gb because that has a lot better price to performance and the 1600 comes with a pretty decent cooler especially if you're doing light to no overclocking