New custom watercooling loop!

[m_tieu]

I just decided to build out a full custom watercooling loop. Performance-Pcs is having a labour day sale. I'm looking to cool my 4770k and 2 gtx 780ti classified cards in a fractal define s case. I'm looking to pick up these parts:

 

Black Ice Nemesis 360GTS® XFLOW Ultra Stealth Cross-Flow Low Profile Radiator

Black Ice Nemesis 360GTS® Ultra Stealth U-Flow Low Profile Radiator

2x EK-C780 GTX Classy - Acetal + Nickel

2x EK-FC780 GTX Classy Backplate - Black Rev 2.0

EK-FC Terminal DUAL Parallel 3-Slot - Acetal

EK-Supremacy EVO CPU Water Block - Nickel/Acetal

EK-Tube ZMT Rubber 15.9/9.5mm (5/8" x 3/8") Tubing - Matte Black 10ft

12x EK-ACF Compression Fitting 10/16mm (3/8 x 5/8") - Black

4x EK-Ekoolant EVO CLEAR (concentrate 100mL) Makes 4L

Swiftech 8-Way PWM Splitter Box - SATA

2x Hardware Labs Black Ice Mount Screws M4 x 28mm Black (Set of 4)

EK-RES X3 250 Reservoir

EK-XTOP D5 PWM - Acetal (incl. pump)

2x Alphacool 16/10 Compression Fitting 90° Revolvable G1/4 - Deep Black

2x Koolance QD3 Quick Disconnect No-Spill Coupling, Female Compression 10 x 16mm (3/8 x 5/8in) Black

2x Koolance QD3 Quick Disconnect No-Spill Coupling, Male Compression 10mm x 16mm (3/8in x 5/8in) Black

4x EK-AF Angled 45° G1/4 - Black

 

I got a few extra angled fittings just in case there are some really tight bends. I also got a few quick disconnects to put before and after the graphics cards for quick upgrades in the future. Please let me know what you guys think. Any comments or suggestions is greatly appreciated!

[TechDistrict]

I just decided to build out a full custom watercooling loop. Performance-Pcs is having a labour day sale. I'm looking to cool my 4770k and 2 gtx 780ti classified cards in a fractal define s case. I'm looking to pick up these parts:

 

Black Ice Nemesis 360GTS® XFLOW Ultra Stealth Cross-Flow Low Profile Radiator

Black Ice Nemesis 360GTS® Ultra Stealth U-Flow Low Profile Radiator

2x EK-C780 GTX Classy - Acetal + Nickel

2x EK-FC780 GTX Classy Backplate - Black Rev 2.0

EK-FC Terminal DUAL Parallel 3-Slot - Acetal

EK-Supremacy EVO CPU Water Block - Nickel/Acetal

EK-Tube ZMT Rubber 15.9/9.5mm (5/8" x 3/8") Tubing - Matte Black 10ft

12x EK-ACF Compression Fitting 10/16mm (3/8 x 5/8") - Black

4x EK-Ekoolant EVO CLEAR (concentrate 100mL) Makes 4L

Swiftech 8-Way PWM Splitter Box - SATA

2x Hardware Labs Black Ice Mount Screws M4 x 28mm Black (Set of 4)

EK-RES X3 250 Reservoir

EK-XTOP D5 PWM - Acetal (incl. pump)

2x Alphacool 16/10 Compression Fitting 90° Revolvable G1/4 - Deep Black

2x Koolance QD3 Quick Disconnect No-Spill Coupling, Female Compression 10 x 16mm (3/8 x 5/8in) Black

2x Koolance QD3 Quick Disconnect No-Spill Coupling, Male Compression 10mm x 16mm (3/8in x 5/8in) Black

4x EK-AF Angled 45° G1/4 - Black

 

I got a few extra angled fittings just in case there are some really tight bends. I also got a few quick disconnects to put before and after the graphics cards for quick upgrades in the future. Please let me know what you guys think. Any comments or suggestions is greatly appreciated!

That will make an awesome watercooled build. Hope to see the outcome.

[m_tieu]

That will make an awesome watercooled build. Hope to see the outcome.

I will post a link to the build log when the parts come in! I'm already getting excited thinking about it. However, I'm not excited to get my credit card bill at the end of the month when I have to pay for all this stuff

[0ld_Chicken]

I just decided to build out a full custom watercooling loop. Performance-Pcs is having a labour day sale. I'm looking to cool my 4770k and 2 gtx 780ti classified cards in a fractal define s case. I'm looking to pick up these parts:

of course their having a sale now, i just got my loop delivered from them yesterday i can't complain they took really good care of me! Looks like it will be awesome! Can't wait to see some pictures