Jump to content

fan placement

UhamVj
By UhamVj
in Cooling
 Share
Posted

I stumbled upon a problem while building my new rig. It's a pretty high end rig i would say

(short list of my specs:

i9-9900k

32g ddr4 3200mhz

rtx 2080ti overclocked

nzxt x72 aio)

and i have 7 fans (all 120mm) i can use including the 3 120mm fans with the radiator. 3 front, 3 top and 1 at the back. How should i configure them? Intake at front? Exit at top and back? Should i place the radiator at the top of the case or in the front of the case? Working with so many fans is new to me. If anybody has some good suggestions please let me know

Link to comment
Share on other sites
Link to post
Share on other sites
Posted

Is dust a consideration?

CPU: i7-2600K 4751MHz 1.44V (software) --> 1.47V at the back of the socket Motherboard: Asrock Z77 Extreme4 (BCLK: 103.3MHz) CPU Cooler: Noctua NH-D15 RAM: Adata XPG 2x8GB DDR3 (XMP: 2133MHz 10-11-11-30 CR2, custom: 2203MHz 10-11-10-26 CR1 tRFC:230 tREFI:14000) GPU: Asus GTX 1070 Dual (Super Jetstream vbios, +70(2025-2088MHz)/+400(8.8Gbps)) SSD: Samsung 840 Pro 256GB (main boot drive), Transcend SSD370 128GB PSU: Seasonic X-660 80+ Gold Case: Antec P110 Silent, 5 intakes 1 exhaust Monitor: AOC G2460PF 1080p 144Hz (150Hz max w/ DP, 121Hz max w/ HDMI) TN panel Keyboard: Logitech G610 Orion (Cherry MX Blue) with SteelSeries Apex M260 keycaps Mouse: BenQ Zowie FK1

 

Model: HP Omen 17 17-an110ca CPU: i7-8750H (0.125V core & cache, 50mV SA undervolt) GPU: GTX 1060 6GB Mobile (+80/+450, 1650MHz~1750MHz 0.78V~0.85V) RAM: 8+8GB DDR4-2400 18-17-17-39 2T Storage: HP EX920 1TB PCIe x4 M.2 SSD + Crucial MX500 1TB 2.5" SATA SSD, 128GB Toshiba PCIe x2 M.2 SSD (KBG30ZMV128G) gone cooking externally, 1TB Seagate 7200RPM 2.5" HDD (ST1000LM049-2GH172) left outside Monitor: 1080p 126Hz IPS G-sync

 

Desktop benching:

Cinebench R15 Single thread:168 Multi-thread: 833 

SuperPi (v1.5 from Techpowerup, PI value output) 16K: 0.100s 1M: 8.255s 32M: 7m 45.93s

Link to comment
Share on other sites
Link to post
Share on other sites
Posted

What case do you have?

Try using the PSU Tier List! 

How to reset the bios/clear the cmos

 

My current rig:

CPU: Ryzen 7 3700x

Ram: 1x16gb DDR4, 2x8gb DDR4

Storage: 1tb nvme ssd

GPU: gtx 3080

Monitor: 23.8" Dell S2417DG 144hz g-sync 1440p + 27" Acer S271HL 60 Hz 1080p

Keyboard: ducky one I | I SF

Mouse: gpro wireless | glorious model o2 wireless

Sound : beyerdynamic 1990 pro | Monoprice liquid spark (amp) + topping d10 (dac)

 

Link to comment
Share on other sites
Link to post
Share on other sites
Posted

What case are you using? I would say mount the radiator at the front (with 3 fans for intake) and then 3 fans as exhaust (1 back, 2 top)

CPU: Intel Core i7 3770 @ 3.91 GHz RAM: G.Skill 4x4GB 2133Mhz DDR3 GPU: AMD HD 7970 3GB SSD: Samsung 840 Evo 500GB PSU: Corsair HX620W  Motherboard: Gigabyte Z68X-UD3H-B3 Case: Phanteks P400 Tempered Glass (Black) Monitor: Dell P2412H, Dell 2012H Keyboard: Razer BlackWidow Ultimate Classic Mouse: Logitech G203 Prodigy HDD: WD Black 3TB

Link to comment
Share on other sites
Link to post
Share on other sites
Posted
15 minutes ago, UhamVj said:

Intake at front? Exit at top and back?

yes

Link to comment
Share on other sites
Link to post
Share on other sites
Posted
1 hour ago, UhamVj said:

I stumbled upon a problem while building my new rig. It's a pretty high end rig i would say

(short list of my specs:

i9-9900k

32g ddr4 3200mhz

rtx 2080ti overclocked

nzxt x72 aio)

and i have 7 fans (all 120mm) i can use including the 3 120mm fans with the radiator. 3 front, 3 top and 1 at the back. How should i configure them? Intake at front? Exit at top and back? Should i place the radiator at the top of the case or in the front of the case? Working with so many fans is new to me. If anybody has some good suggestions please let me know

I have 11 fans in my case.

 

Intake everywhere, exhaust rear and top of case.  IMHO you should be exhausting your radiator air at top of the PC.  Ive never seen better thermals from a front placement when top placement is an option.

Workstation Laptop: Dell Precision 7540, Xeon E-2276M, 32gb DDR4, Quadro T2000 GPU, 4k display

Wifes Rig: ASRock B550m Riptide, Ryzen 5 5600X, Sapphire Nitro+ RX 6700 XT, 16gb (2x8) 3600mhz V-Color Skywalker RAM, ARESGAME AGS 850w PSU, 1tb WD Black SN750, 500gb Crucial m.2, DIYPC MA01-G case

My Rig: ASRock B450m Pro4, Ryzen 5 3600, ARESGAME River 5 CPU cooler, EVGA RTX 2060 KO, 16gb (2x8) 3600mhz TeamGroup T-Force RAM, ARESGAME AGV750w PSU, 1tb WD Black SN750 NVMe Win 10 boot drive, 3tb Hitachi 7200 RPM HDD, Fractal Design Focus G Mini custom painted.  

NVIDIA GeForce RTX 2060 video card benchmark result - AMD Ryzen 5 3600,ASRock B450M Pro4 (3dmark.com)

Daughter 1 Rig: ASrock B450 Pro4, Ryzen 7 1700 @ 4.2ghz all core 1.4vCore, AMD R9 Fury X w/ Swiftech KOMODO waterblock, Custom Loop 2x240mm + 1x120mm radiators in push/pull 16gb (2x8) Patriot Viper CL14 2666mhz RAM, Corsair HX850 PSU, 250gb Samsun 960 EVO NVMe Win 10 boot drive, 500gb Samsung 840 EVO SSD, 512GB TeamGroup MP30 M.2 SATA III SSD, SuperTalent 512gb SATA III SSD, CoolerMaster HAF XM Case. 

https://www.3dmark.com/3dm/37004594?

Daughter 2 Rig: ASUS B350-PRIME ATX, Ryzen 7 1700, Sapphire Nitro+ R9 Fury Tri-X, 16gb (2x8) 3200mhz V-Color Skywalker, ANTEC Earthwatts 750w PSU, MasterLiquid Lite 120 AIO cooler in Push/Pull config as rear exhaust, 250gb Samsung 850 Evo SSD, Patriot Burst 240gb SSD, Cougar MX330-X Case

 

Link to comment
Share on other sites
Link to post
Share on other sites
  • 3 weeks later...
Posted
  • Author

I think i know enough now, thanks for all the help. (i coudn't respond for a long time)

Link to comment
Share on other sites
Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing Cooling

×