Jump to content

SLI issue

Mohammed2935
By Mohammed2935
in Graphics Cards
 Share
Posted

Roll back to the old BIOS then and see if the problem persists? Because if not, it's not a BIOS issue but something driver related.

PC Specs - AMD Ryzen 7 5800X3D - MSI B550M Mortar - 32GB Corsair Vengeance RGB DDR4-3600 @ CL16 - ASRock RX7800XT - 660p 1TBGB & Crucial P5 1TB - Fractal Define Mini C - CM V750v2 - Windows 11 Pro

 

Link to comment
https://linustechtips.com/topic/990136-sli-issue/#findComment-11922688
Share on other sites
Link to post
Share on other sites
Posted

Does it say anything like the profile needs to be fixed or reapplied?

 

Id either reinstall nvidia drivers or go back to an older bios. 

Main RIg Lian Li O11 MINI, I7 9900k, ASUS ROG Maximus XI Hero, G.Skill Ripjaws 3600 32GB, 3090FE, EVGA 1000G5, Acer Nitro XZ3 2560 x 1440@240hz 

 

Spare RIg Lian Li O11 AIR MINI, I7 4790K, Asus Maximus VI Extreme, G.Skill Ares 2400 32Gb, EVGA 1080ti, 1080sc 1070sc & 1060 SSC, EVGA 850GA, Acer KG251Q 1920x1080@240hz 

 

Link to comment
https://linustechtips.com/topic/990136-sli-issue/#findComment-11922886
Share on other sites
Link to post
Share on other sites
Posted
  • Author

I installed windows 10 1803 and 1809 100% clean/format on the same updated bios. windows 10 should enable SLI automatically after installing the graphics driver, it didn't this time so I enable it myself but it disables itself soon after I enable it.

 

I downloaded the latest update for 1803 and now SLI is working.

I downloaded the latest update for 1809 and SLI didn't work only with the newest bios update.  

 

I never had this problem before on older bios, I don't have to update anything.

Link to comment
https://linustechtips.com/topic/990136-sli-issue/#findComment-11923136
Share on other sites
Link to post
Share on other sites
Posted
  • Author
1 hour ago, Mick Naughty said:

Does it say anything like the profile needs to be fixed or reapplied?

 

Id either reinstall nvidia drivers or go back to an older bios. 

Which version of Windows 10 are you using guys?

 

No, I just hear the sound of SLI being enabled and after it sounds of sli disabling.

Link to comment
https://linustechtips.com/topic/990136-sli-issue/#findComment-11923150
Share on other sites
Link to post
Share on other sites
Posted
6 minutes ago, Mohammed2935 said:

Which version of Windows 10 are you using guys?

 

No, I just hear the sound of SLI being enabled and after it sounds of sli disabling.

Idk what version, never paid attention. 

 

Ive never heard sli make a sound, been using it for over 10 years now. Unless you mean the device noise windows makes. 

Main RIg Lian Li O11 MINI, I7 9900k, ASUS ROG Maximus XI Hero, G.Skill Ripjaws 3600 32GB, 3090FE, EVGA 1000G5, Acer Nitro XZ3 2560 x 1440@240hz 

 

Spare RIg Lian Li O11 AIR MINI, I7 4790K, Asus Maximus VI Extreme, G.Skill Ares 2400 32Gb, EVGA 1080ti, 1080sc 1070sc & 1060 SSC, EVGA 850GA, Acer KG251Q 1920x1080@240hz 

 

Link to comment
https://linustechtips.com/topic/990136-sli-issue/#findComment-11923170
Share on other sites
Link to post
Share on other sites
Posted
  • Author
1 minute ago, Mick Naughty said:

Idk what version, never paid attention. 

 

Ive never heard sli make a sound, been using it for over 10 years now. Unless you mean the device noise windows makes. 

yeah just like the sound of plugging USB to your computer.

Link to comment
https://linustechtips.com/topic/990136-sli-issue/#findComment-11923177
Share on other sites
Link to post
Share on other sites
Posted
1 minute ago, Mohammed2935 said:

yeah just like the sound of plugging USB to your computer.

Do you have a faulty SLI bridge?  Monitor cable?  I get the USB boops from swapping monitors around... 

Workstation Laptop: Dell Precision 7540, Xeon E-2276M, 32gb DDR4, Quadro T2000 GPU, 4k display

Wifes Rig: ASRock B550m Riptide, Ryzen 5 5600X, Sapphire Nitro+ RX 6700 XT, 16gb (2x8) 3600mhz V-Color Skywalker RAM, ARESGAME AGS 850w PSU, 1tb WD Black SN750, 500gb Crucial m.2, DIYPC MA01-G case

My Rig: ASRock B450m Pro4, Ryzen 5 3600, ARESGAME River 5 CPU cooler, EVGA RTX 2060 KO, 16gb (2x8) 3600mhz TeamGroup T-Force RAM, ARESGAME AGV750w PSU, 1tb WD Black SN750 NVMe Win 10 boot drive, 3tb Hitachi 7200 RPM HDD, Fractal Design Focus G Mini custom painted.  

NVIDIA GeForce RTX 2060 video card benchmark result - AMD Ryzen 5 3600,ASRock B450M Pro4 (3dmark.com)

Daughter 1 Rig: ASrock B450 Pro4, Ryzen 7 1700 @ 4.2ghz all core 1.4vCore, AMD R9 Fury X w/ Swiftech KOMODO waterblock, Custom Loop 2x240mm + 1x120mm radiators in push/pull 16gb (2x8) Patriot Viper CL14 2666mhz RAM, Corsair HX850 PSU, 250gb Samsun 960 EVO NVMe Win 10 boot drive, 500gb Samsung 840 EVO SSD, 512GB TeamGroup MP30 M.2 SATA III SSD, SuperTalent 512gb SATA III SSD, CoolerMaster HAF XM Case. 

https://www.3dmark.com/3dm/37004594?

Daughter 2 Rig: ASUS B350-PRIME ATX, Ryzen 7 1700, Sapphire Nitro+ R9 Fury Tri-X, 16gb (2x8) 3200mhz V-Color Skywalker, ANTEC Earthwatts 750w PSU, MasterLiquid Lite 120 AIO cooler in Push/Pull config as rear exhaust, 250gb Samsung 850 Evo SSD, Patriot Burst 240gb SSD, Cougar MX330-X Case

 

Link to comment
https://linustechtips.com/topic/990136-sli-issue/#findComment-11923181
Share on other sites
Link to post
Share on other sites
Posted

Did you reinstall the gpu drivers?

Main RIg Lian Li O11 MINI, I7 9900k, ASUS ROG Maximus XI Hero, G.Skill Ripjaws 3600 32GB, 3090FE, EVGA 1000G5, Acer Nitro XZ3 2560 x 1440@240hz 

 

Spare RIg Lian Li O11 AIR MINI, I7 4790K, Asus Maximus VI Extreme, G.Skill Ares 2400 32Gb, EVGA 1080ti, 1080sc 1070sc & 1060 SSC, EVGA 850GA, Acer KG251Q 1920x1080@240hz 

 

Link to comment
https://linustechtips.com/topic/990136-sli-issue/#findComment-11923192
Share on other sites
Link to post
Share on other sites
Posted
Just now, Mohammed2935 said:

No, I hope everything is ok. I never had this problem until the new bios.

 

The cable is high quilty and new.

So I Crossfire...I have literally (while in the middle of competitive gaming) undid my Crossfire bridge (STUPID, I got lucky) - and that didn't produce a boop or beep.  In fact it didn't do anything but continue to artifact until I reboot.  Had to reslot the cards to get Xfire to work again, but that's neither here nor there.

 

The only time I get boops and beeps from GPU section is when I hotswap my multi-monitor setup.  Then I get the USB sound each time I unplug or plug a monitor in.  So Im not sure whats producing your noise.

Workstation Laptop: Dell Precision 7540, Xeon E-2276M, 32gb DDR4, Quadro T2000 GPU, 4k display

Wifes Rig: ASRock B550m Riptide, Ryzen 5 5600X, Sapphire Nitro+ RX 6700 XT, 16gb (2x8) 3600mhz V-Color Skywalker RAM, ARESGAME AGS 850w PSU, 1tb WD Black SN750, 500gb Crucial m.2, DIYPC MA01-G case

My Rig: ASRock B450m Pro4, Ryzen 5 3600, ARESGAME River 5 CPU cooler, EVGA RTX 2060 KO, 16gb (2x8) 3600mhz TeamGroup T-Force RAM, ARESGAME AGV750w PSU, 1tb WD Black SN750 NVMe Win 10 boot drive, 3tb Hitachi 7200 RPM HDD, Fractal Design Focus G Mini custom painted.  

NVIDIA GeForce RTX 2060 video card benchmark result - AMD Ryzen 5 3600,ASRock B450M Pro4 (3dmark.com)

Daughter 1 Rig: ASrock B450 Pro4, Ryzen 7 1700 @ 4.2ghz all core 1.4vCore, AMD R9 Fury X w/ Swiftech KOMODO waterblock, Custom Loop 2x240mm + 1x120mm radiators in push/pull 16gb (2x8) Patriot Viper CL14 2666mhz RAM, Corsair HX850 PSU, 250gb Samsun 960 EVO NVMe Win 10 boot drive, 500gb Samsung 840 EVO SSD, 512GB TeamGroup MP30 M.2 SATA III SSD, SuperTalent 512gb SATA III SSD, CoolerMaster HAF XM Case. 

https://www.3dmark.com/3dm/37004594?

Daughter 2 Rig: ASUS B350-PRIME ATX, Ryzen 7 1700, Sapphire Nitro+ R9 Fury Tri-X, 16gb (2x8) 3200mhz V-Color Skywalker, ANTEC Earthwatts 750w PSU, MasterLiquid Lite 120 AIO cooler in Push/Pull config as rear exhaust, 250gb Samsung 850 Evo SSD, Patriot Burst 240gb SSD, Cougar MX330-X Case

 

Link to comment
https://linustechtips.com/topic/990136-sli-issue/#findComment-11923193
Share on other sites
Link to post
Share on other sites
Posted
  • Author
6 minutes ago, Tristerin said:

So I Crossfire...I have literally (while in the middle of competitive gaming) undid my Crossfire bridge (STUPID, I got lucky) - and that didn't produce a boop or beep.  In fact it didn't do anything but continue to artifact until I reboot.  Had to reslot the cards to get Xfire to work again, but that's neither here nor there.

 

The only time I get boops and beeps from GPU section is when I hotswap my multi-monitor setup.  Then I get the USB sound each time I unplug or plug a monitor in.  So Im not sure whats producing your noise.

maybe it is the monitor sound because when I enable SLI the screen goes black and then comes back. tera tit ruta (accepted) .... toru ron (not accepted) .... I not sure hahaha.

Link to comment
https://linustechtips.com/topic/990136-sli-issue/#findComment-11923211
Share on other sites
Link to post
Share on other sites
Posted

Well if sli is working I don’t see an issue then. 

Main RIg Lian Li O11 MINI, I7 9900k, ASUS ROG Maximus XI Hero, G.Skill Ripjaws 3600 32GB, 3090FE, EVGA 1000G5, Acer Nitro XZ3 2560 x 1440@240hz 

 

Spare RIg Lian Li O11 AIR MINI, I7 4790K, Asus Maximus VI Extreme, G.Skill Ares 2400 32Gb, EVGA 1080ti, 1080sc 1070sc & 1060 SSC, EVGA 850GA, Acer KG251Q 1920x1080@240hz 

 

Link to comment
https://linustechtips.com/topic/990136-sli-issue/#findComment-11923228
Share on other sites
Link to post
Share on other sites
Posted

The noises are supposed to happen when enabling or disabling sli. If it’s on, it’s on. And the nvidia control panel would reflect that. 

Main RIg Lian Li O11 MINI, I7 9900k, ASUS ROG Maximus XI Hero, G.Skill Ripjaws 3600 32GB, 3090FE, EVGA 1000G5, Acer Nitro XZ3 2560 x 1440@240hz 

 

Spare RIg Lian Li O11 AIR MINI, I7 4790K, Asus Maximus VI Extreme, G.Skill Ares 2400 32Gb, EVGA 1080ti, 1080sc 1070sc & 1060 SSC, EVGA 850GA, Acer KG251Q 1920x1080@240hz 

 

Link to comment
https://linustechtips.com/topic/990136-sli-issue/#findComment-11923247
Share on other sites
Link to post
Share on other sites
Posted
  • Author
3 minutes ago, Mick Naughty said:

The noises are supposed to happen when enabling or disabling sli. If it’s on, it’s on. And the nvidia control panel would reflect that. 

I installed new fresh windows 10 before. after it is installed I disconnect from the internet because I don't want windows to update Nvidia drivers so I plug my USB that contain Nvidia driver. SLI should be enabled automatically after driver installation, this time it is not and when I enable it, it disables itself. This never happened to me before.

 

anyway, it is ok now.

Link to comment
https://linustechtips.com/topic/990136-sli-issue/#findComment-11923276
Share on other sites
Link to post
Share on other sites
Posted
  • Author

I went back to windows 10 1803, I installed it clean and fresh.

 

I updated 1803 to the latest version.

 

I can't enable sli before and after updating 1803 very strange. 

 

also the bios got corrupted on 1809 which made it go back to very old bios ..... So i updated the bios again 

Link to comment
https://linustechtips.com/topic/990136-sli-issue/#findComment-11926543
Share on other sites
Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing Graphics Cards

×