Corsair H100 Mod?

[cypress]

Good evening,

I have received an upgrade kit since today and can now connect everything so that I only need a Modular cable for the video card.
And one for a Molex for the H100.

 

I wonder now
The h100 is controlled by a 3 pin connection and the power comes from the Molex.
Can I change it so that I only need the 3pin connection?

I must add that on the h100 2 fans are connected for the radiator.
perhaps this is the reason that it has been developed.

 

I am curious, and really hope that it is possible so that there are no useless cables hanging around

[Neo-revo]

stable power delivery, and RPM monitoring to 'trick' the cpu fan slot to thinking a fan is plugged in.

 

as for actually mating the two together.   i have not heard of any one trying this sort of mod.   not to say some one hasn't

[cypress]

I am curious now.
If I output the mod and then connect to the Water Pump connector.
Then it has to go well, since it works at full power.
Or am I now wrong?

[Neo-revo]

as long as  3-pin you plug it into can deliver enough amps.  and not sure if there is a difference between running the small pcb i assume is in your cpu housing and the actual pump.

 

does the molex use all 4 wires? or just 2 or 3?

[cypress]

it seems that it isnt possible to mod it...
With the reason, it uses more then 12watt. (the fan header delivers up to 1a)
It wil work if i mod it, but unsure for how long...

So im going to research wich AIO is the best choice at the moment
ATM im thinking for the cooler master ML240L RGB, becuase its quite cheap

but Thank you for you support and time