Encountering way too many BSODs all across the board

[Epicfacebro]

Operating system: Windows 10 Home 10.0.17134 Build 17134

Bios: American Megatrends Inc. 1009, 7/23/2017

System:

Asus Strix Z270E

I7-7700k @4.20GHz

CoolerMaster HyperEvo212

16 GB G.SKILL Tridentz RBG (2x8GB) (3000MHz)

NVIDIA GeForce GTX 1070 Ti

Seasonic Focus Gold 850

Western Digital - Caviar Blue 1TB 3.5" 7200RPM

Inland- 240 gb ssd

 

Crash parameters: Usually running a game or video streaming service

BSOD Codes:

-System Service Exception - dxgkrnl.sys

-Memory Management

-Unexpected Kernel Mode Trap - NTFS.sys

 

3 Month old computer I personally built.  Building was very fun but now I'm running into problems causing games ranging from Destiny 2 to X Plane 11.  I haven't had a problem since two days ago and have had 3 seperate BSODs, two of which happened today. Normal workloads like Office 365 run fine.  Any and all help would be greatly appreciated.

[runfaster]

Try installing the free apps Core Temp or GPU Temp and verify the temperatures in games.  You may find your CPU or GPU overheating.  Check that your CPU has sufficient thermal paste and the heatsink is correctly seated.  An app called OCCT will measure the power supply voltages using the motherboard monitoring.

 

I had crashes playing Planetside 2 and Windows event Viewer routinely showed GPU related errors.  i installed GPU Temp, Core Temp, and OCCT to find that my CPU cores went over 80 deg C in games.  Found out my CPU heatsink had shifted out of place.  Re-gooped the CPU and re-installed the heatsink and good to go.

 

These free apps might help.

https://www.alcpu.com/CoreTemp/

http://www.gputemp.com/

http://www.ocbase.com/

[airdeano]

11 hours ago, Epicfacebro said:

1. System Service Exception - dxgkrnl.sys
2. Memory Management
3. Unexpected Kernel Mode Trap - NTFS.sys

all these are related to a drive (SSD) error.

1. when installation was done, is this a clean install or 'upgrade'
2. sounds like the drive is full and the virtual memory is low or non-existent.
3. just a guess: 

   Quote

   One possible cause of this bug check is disk corruption. Corruption in the NTFS file system or bad blocks (sectors) on the hard disk can induce this error. Corrupted SCSI and IDE drivers can also adversely affect the system's ability to read and write to disk, thus causing the error.

   Another possible cause is depletion of nonpaged pool memory. If the nonpaged pool memory is completely depleted, this error can stop the system. However, during the indexing process, if the amount of available nonpaged pool memory is very low, another kernel-mode driver requiring nonpaged pool memory can also trigger this error. 

    

some others are mobo BIOS, GPU drivers are out of date.

[Epicfacebro]

12 hours ago, runfaster said:

Try installing the free apps Core Temp or GPU Temp and verify the temperatures in games.  You may find your CPU or GPU overheating.  Check that your CPU has sufficient thermal paste and the heatsink is correctly seated.  An app called OCCT will measure the power supply voltages using the motherboard monitoring.

 

I had crashes playing Planetside 2 and Windows event Viewer routinely showed GPU related errors.  i installed GPU Temp, Core Temp, and OCCT to find that my CPU cores went over 80 deg C in games.  Found out my CPU heatsink had shifted out of place.  Re-gooped the CPU and re-installed the heatsink and good to go.

 

These free apps might help.

https://www.alcpu.com/CoreTemp/

http://www.gputemp.com/

http://www.ocbase.com/

Thank you, Ill make sure to look into this

 

3 hours ago, airdeano said:

all these are related to a drive (SSD) error.

1. when installation was done, is this a clean install or 'upgrade'
2. sounds like the drive is full and the virtual memory is low or non-existent.
3. just a guess: some others are mobo BIOS, GPU drivers are out of date.

1. It was a clean install

2. I still have 85 GB free on the SSD and 336 GB free on the hard drive

3.  GPU driver is up to date

 

I updated the mobo BIOS this morning, hopefully that and monitoring temps will be my solution.  Thank You