Jump to content

Hi,

 

Recently I got a shortage in my house and it seems come from my PC. It is a very old rig with Silver Power SP-SS500 PSU. Thus, I replace it with Corsair HX750. I choose the Corsair because I am planning to build a whole new PC by the end of the year. Anyway, I use Intel Q9650, when I tried to benchmark it using CINEBENCH R15, it got throttled so bad. Previously when I use my old PSU, the highest temp was 88 degree, but with the new one it reached 99 degree and throttled. I did not change anything from the rig, Everything is the same. Below is my rig detail:

-Intel Q9650

-GTX 650 TI

-8GB 800Mhz Memory

-4x120mm fan

-A set of gaming keyboard and mouse

-A webcam

 

Is it possible that when I use the old PSU, it can't provide proper power to the CPU and make the temp lower? The idle temp and ambience temp is same.

Link to comment
https://linustechtips.com/topic/971587-new-psu-increase-cpu-temp/
Share on other sites

Link to post
Share on other sites

Well whats probably happening is that your old psu could not or would not supply enough power so your cpu never got to is max speed so thats why its hotter

Current main PC:

 

CPU: R7 7800x3d (PBO undervolted)

GPU: 7900XT

RAM: 32gb Gskill Ripjaws S5 6000mhz

MOBO: Asus TUF B650e wifi

CASE: Xtia Xproto ATX

 

Server PC:

 

CPU: Xeon X5690

GPU: R9 Fury X

RAM: Assorted 4gb sticks (24gb total)

MOBO: Asus Sabretooth X58

CASE: Alienware Area 51 ALX

 

Link to post
Share on other sites

Also your cpus thermal paste may be old or you just have a bad cpu cooler

Current main PC:

 

CPU: R7 7800x3d (PBO undervolted)

GPU: 7900XT

RAM: 32gb Gskill Ripjaws S5 6000mhz

MOBO: Asus TUF B650e wifi

CASE: Xtia Xproto ATX

 

Server PC:

 

CPU: Xeon X5690

GPU: R9 Fury X

RAM: Assorted 4gb sticks (24gb total)

MOBO: Asus Sabretooth X58

CASE: Alienware Area 51 ALX

 

Link to post
Share on other sites

1 minute ago, Terabyte_272 said:

Also your cpus thermal paste may be old or you just have a bad cpu cooler

I changed the paste recently using Arctic Mx 4 and did not touch the CPU when changing the PSU, I am not sure though about the CPU fan, it is an old stock cooler. It might be the reason.

Link to post
Share on other sites

6 minutes ago, vyneta said:

I changed the paste recently using Arctic Mx 4 and did not touch the CPU when changing the PSU, I am not sure though about the CPU fan, it is an old stock cooler. It might be the reason.

The old stock Intel coolers are good, as long as it's one of the tall ones with the decent fan.

I WILL find your ITX build thread, and I WILL recommend the SIlverstone Sugo SG13B

 

Primary PC:

i7 8086k - EVGA Z370 Classified K - G.Skill Trident Z RGB - WD SN750 - Jedi Order Titan Xp - Hyper 212 Black (with RGB Riing flair) - EVGA G3 650W - dual booting Windows 11 and Fedora Linux - Black and green theme, Razer brainwashed me.

Draws 400 watts under max load, for reference.

 

PSU tier list

How many watts do I need?

PSU misconceptions, protections explainedgroup reg is bad

Link to post
Share on other sites

I had a similar problem when switching from an older EVGA power supply to a new one from Corsair. It stemmed from the fact that the fan in the EVGA model is temperature controlled, while the one in the Corsair model is load controlled, so the Corsair's fan speed stayed pretty much constant which didn't allow heat to escape as quickly. Can you check if there's any dust in your CPU cooler?

Computer engineering PhD student and RFML researcher

 

Daily Driver:

CPU: Ryzen 7 4800H | GPU: RTX 2060 | RAM: 32GB DDR4 3200MHz C16 | OS: Debian 13

 

Gaming PC:

CPU: Ryzen 5 5600X | GPU: EVGA RTX 2080Ti | RAM: 32GB DDR4 3200MHz C16 | OS: Windows 11

Link to post
Share on other sites

3 hours ago, thegreengamers said:

It stemmed from the fact that the fan in the EVGA model is temperature controlled, while the one in the Corsair model is load controlled, so the Corsair's fan speed stayed pretty much constant which didn't allow heat to escape as quickly

Pretty much all PSUs have their fans temperature controlled. EVGA branded PSUs just tend to have excessively aggressive fan curves. 

For example, the G3 850W runs its fan at 1690RPM at a 255W load. The much lower end Corsair CX450 (CWT) runs its fan at 1290RPM at 270W.

The temperature increases with the load. 

:)

Link to post
Share on other sites

On 9/14/2018 at 12:01 AM, fasauceome said:

The old stock Intel coolers are good, as long as it's one of the tall ones with the decent fan.

 

On 9/14/2018 at 12:25 AM, thegreengamers said:

I had a similar problem when switching from an older EVGA power supply to a new one from Corsair. It stemmed from the fact that the fan in the EVGA model is temperature controlled, while the one in the Corsair model is load controlled, so the Corsair's fan speed stayed pretty much constant which didn't allow heat to escape as quickly. Can you check if there's any dust in your CPU cooler?

 

I just realize that the stock cooler that I used is for Core 2 Duo CPU. After I changed the cooler, the CPU temp is fine now.

Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

×