Jump to content

Overclocking 7600k

Shrepto
By Shrepto
in CPUs, Motherboards, and Memory
 Share
Posted

I just purchased a Corsair H115i.  IT IS NOT INSTALLED YET!

Anyhow, current setup has a Cryorig H7.  4.8ghz overclock at 1.275v with LLC set to level 5 for the Asus Bios.  Did a ten minute Prime 95 Blend Test and ended fine.  I realize that's not a very long.  Thermals were clearly becoming an issue as one of the cores peaked at 99c.  Ambient temps are 69F in the room.

From what I've researched 4.8ghz at 1.275v isn't necessarily amazing, but it's not shit either.  The goal is 5.0ghz with the AIO when it comes in on Friday.  I'm assuming that it will be able to handle the heat *fingers crossed*

Any suggestions on what to set for LLC?  I raised it to level 5 to dial in a specific Vcore awhile back without having to deal with the fluctuations.  Kind of new to overclocking, so I'm not sure if I'm using it in the manner it should be used.
OC.thumb.png.8cb8fb03bed32f7fafeb199b64f0eae3.png

Link to comment
Share on other sites
Link to post
Share on other sites
Posted

If you're using manual voltage mode, use the LLC settings that give you the same voltage at idle and under load.

CPU: i7-2600K 4751MHz 1.44V (software) --> 1.47V at the back of the socket Motherboard: Asrock Z77 Extreme4 (BCLK: 103.3MHz) CPU Cooler: Noctua NH-D15 RAM: Adata XPG 2x8GB DDR3 (XMP: 2133MHz 10-11-11-30 CR2, custom: 2203MHz 10-11-10-26 CR1 tRFC:230 tREFI:14000) GPU: Asus GTX 1070 Dual (Super Jetstream vbios, +70(2025-2088MHz)/+400(8.8Gbps)) SSD: Samsung 840 Pro 256GB (main boot drive), Transcend SSD370 128GB PSU: Seasonic X-660 80+ Gold Case: Antec P110 Silent, 5 intakes 1 exhaust Monitor: AOC G2460PF 1080p 144Hz (150Hz max w/ DP, 121Hz max w/ HDMI) TN panel Keyboard: Logitech G610 Orion (Cherry MX Blue) with SteelSeries Apex M260 keycaps Mouse: BenQ Zowie FK1

 

Model: HP Omen 17 17-an110ca CPU: i7-8750H (0.125V core & cache, 50mV SA undervolt) GPU: GTX 1060 6GB Mobile (+80/+450, 1650MHz~1750MHz 0.78V~0.85V) RAM: 8+8GB DDR4-2400 18-17-17-39 2T Storage: HP EX920 1TB PCIe x4 M.2 SSD + Crucial MX500 1TB 2.5" SATA SSD, 128GB Toshiba PCIe x2 M.2 SSD (KBG30ZMV128G) gone cooking externally, 1TB Seagate 7200RPM 2.5" HDD (ST1000LM049-2GH172) left outside Monitor: 1080p 126Hz IPS G-sync

 

Desktop benching:

Cinebench R15 Single thread:168 Multi-thread: 833 

SuperPi (v1.5 from Techpowerup, PI value output) 16K: 0.100s 1M: 8.255s 32M: 7m 45.93s

Link to comment
Share on other sites
Link to post
Share on other sites
Posted
  • Author
Just now, Jurrunio said:

If you're using manual voltage mode, use the LLC settings that give you the same voltage at idle and under load.

CPU-Z is reporting back 1.28V so it would seem that it is going up .05V.  I'll mess with it more tomorrow once the AIO comes in.

*SUCH EXCITES*

Link to comment
Share on other sites
Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing CPUs, Motherboards, and Memory

×