Phanteks halos compatibility

[Jasonk21]

Hi there, I recently purchased a phanteks p350x case and would like to use the RGB header with the case so I can sync the halos. My motherboard doesn't have an RGB header because it's an older system. the case has a 3 pin RGB connector while the halos have a 4 pin, is a connector I can purchase from Amazon?

[Jasonk21]

Bump

[TVwazhere]

14 hours ago, Jasonk21 said:

Hi there, I recently purchased a phanteks p350x case and would like to use the RGB header with the case so I can sync the halos. My motherboard doesn't have an RGB header because it's an older system. the case has a 3 pin RGB connector while the halos have a 4 pin, is a connector I can purchase from Amazon?

The 3 pin connectro is an Addressible RGB header, the 4 pin is the "standard RGB" header.

 

I dont believe there is a controller specifically for both. the 4 pin HALO's could be controlled by any standard RGB controller like a Remote LED controller like this:

https://www.amazon.com/ATTAV-Magnetic-Computer-Powerful-Function/dp/B01LQS65BM (I dont know if this EXACT kit will work)

 

You will most likely need this adaptor to make the Phanteks RGB options work with kits like the one above (They arranged the pins on the Phanteks to be non standard, and this just rearranges them so when you plug them in, blue is blue, not green!)

https://www.amazon.com/Phanteks-Adapter-Specified-Control-PH-CB_RGB4P/dp/B01BZIBJAK