Cpu diode temps

[Captinjigglesworth]

Hello All,

My CPU temps on hw monitor have been at +50 on ideal, i think it might be a sensor near the socket with an offset because i have a water cooler

[Joveice]

HW monitor reported my CPU to idle at 50 too, realtemp and all the others report 20C

[Captinjigglesworth]

can you give me the link to realtemp because its scaring me

[Captinjigglesworth]

Just now, Joveice said:

HW monitor reported my CPU to idle at 50 too, realtemp and all the others report 20C

sorry forgot to quote

 

[Joveice]

1 minute ago, Captinjigglesworth said:

sorry forgot to quote

 

I downloaded it from here https://www.techpowerup.com/realtemp/

[Captinjigglesworth]

ok its installing now i will report progress when it comes 

1 minute ago, Joveice said:

I downloaded it from here https://www.techpowerup.com/realtemp/

 

[8-Bit Ninja]

1 minute ago, Captinjigglesworth said:

ok its installing now i will report progress when it comes 

 

you could also try aida 64 

[Ryujin2003]

What CPU?

[Captinjigglesworth]

21 minutes ago, Ryujin2003 said:

What CPU?

i7 7700k

[Captinjigglesworth]

33 minutes ago, 8-Bit Ninja said:

you could also try aida 64 

 

36 minutes ago, Joveice said:

I downloaded it from here https://www.techpowerup.com/realtemp/

 

25 minutes ago, Ryujin2003 said:

What CPU?

ok no progress i still have upper 50s idk of thats the actual temp or not 

[Captinjigglesworth]

Just now, Captinjigglesworth said:

 

 

ok no progress i still have upper 50s idk of thats the actual temp or not 

here's my cooler https://www.amazon.com/gp/product/B077FZPCRH/ref=oh_aui_detailpage_o05_s00?ie=UTF8&psc=1

[Mira Yurizaki]

If you can run a stress test like AIDA64 or Prime95 and it goes over say 100C without apparently thermal throttling, there's a measurement issue. If it hits 90C and starts to thermal throttle, there's something wrong with the cooler or how you installed it.

[Captinjigglesworth]

5 minutes ago, M.Yurizaki said:

If you can run a stress test like AIDA64 or Prime95 and it goes over say 100C without apparently thermal throttling, there's a measurement issue. If it hits 90C and starts to thermal throttle, there's something wrong with the cooler or how you installed it.

ran prime 95 and the highest temperature was 85 after 5 mins no throttleing tho its a nice cooler but its high for idel

[Mira Yurizaki]

Just now, Captinjigglesworth said:

ran prime 95 and the highest temperature was 85 after 5 mins no throttleing tho its a nice cooler but its high for idel

85C seems high for a 360mm water cooler, especially after 5 minutes.

[Captinjigglesworth]

2 minutes ago, M.Yurizaki said:

85C seems high for a 360mm water cooler, especially after 5 minutes.

ik what should i do i was looking at higher static flow fans for the rad i am using the stock ones rn

[Mira Yurizaki]

1 minute ago, Captinjigglesworth said:

ik what should i do i was looking at higher static flow fans for the rad i am using the stock ones rn

I would double check the installation was done properly. A first test I do is to firmly press the cooler against the CPU and see if temperatures start dropping.

[Captinjigglesworth]

3 minutes ago, M.Yurizaki said:

I would double check the installation was done properly. A first test I do is to firmly press the cooler against the CPU and see if temperatures start dropping.

ok i will try this later as i still have some work to do and i will respond a little bit later