New build will not display

[Vuxx]

Hello! I just finished building my computer plugged it in, and waited for the display. Nothing appeared except "No signal". I am utterly confused as this is my first ever custom build. Thank you.

 

Motherboard : Z370-e gaming motherboard

 

Cpu : i7-8700K 3.7Ghz

 

Ram : 8GB Fury HyperX DDR4

 

Gpu : gtx 1050ti EVGA 4GB

 

Ssd : NVME 960 EVO M.2 SSD

 

Cooler? : NZXT kraken x62

 

PSU : Corsair RM650x 650 Watt psu.

 

Thanks for any help.

[joshuawi99]

GPU fan spinning. Try the IGPU at ur Mainboard without the GPU

[STRESSMASTER]

You need to first connect your monitor to the built-in video port and than go into BIOS and set it to use a PCI-e card first. reboot move cord to your 1050ti and restart. you should be g2g

[knightslugger]

8 minutes ago, STRESSMASTER said:

You need to first connect your monitor to the built-in video port and than go into BIOS and set it to use a PCI-e card first. reboot move cord to your 1050ti and restart. you should be g2g

i have never needed to do this.

 

Check to make sure your monitor is set to the correct video input.

[Vuxx]

22 minutes ago, STRESSMASTER said:

You need to first connect your monitor to the built-in video port and than go into BIOS and set it to use a PCI-e card first. reboot move cord to your 1050ti and restart. you should be g2g

Didn't work, I noticed 5 LEDs on my board.

 

BOOT

VGA

DRAM

CPU

 

the error colours,

 

BOOT - YellowGreen

VGA - White

DRAM - Yellow

CPU - Red

 

It gets stuck on DRAM. Don't see why though. I bought the correct ram

 

[STRESSMASTER]

Ok remove all but one RAM and try it. if you still fail take that one out and put a different one in but in a different RAM slot and try. Let me know how that goes.

[Vuxx]

2 minutes ago, STRESSMASTER said:

Ok remove all but one RAM and try it. if you still fail take that one out and put a different one in but in a different RAM slot and try. Let me know how that goes.

Only have one ram stick, I can link you if that helps.

[STRESSMASTER]

8 minutes ago, Vuxx said:

Only have one ram stick, I can link you if that helps.

I have just did a bit of reading and found that this board has some issues sadly. you need to update the BIOS to 806. Also some people had luck with a different low Mhz RAM chip. do you know if the RAM module is on the QVL? I recommend if updating the bios doesn't work. Check to see that all mobo standoffs are installed and nothing on the Mobo is touching metal anywhere. Also check that your 8-pin is seated properly. If all else fails and This maybe the case here you may need to RMA it so follow the link below. Asus has decent customer service so here there phone # as well 1-812-282-2787

 https://www.asus.com/au/Motherboards/ROG-STRIX-Z270E-GAMING/HelpDesk_Download/

[Vuxx]

2 minutes ago, STRESSMASTER said:

I have just did a bit of reading and found that this board has some issues sadly. you need to update the BIOS to 806. Also some people had luck with a different low Mhz RAM chip. do you know if the RAM module is on the QVL? I recommend if bios doesn't work check to see that all MD standoffs are installed and nothing on the Mobo is touching metal anywhere. If all else fails and This maybe the case here you may need to RMA it so follow the link below. Asus has decent customer service so here there phone # as well 1-812-282-2787

 https://www.asus.com/au/Motherboards/ROG-STRIX-Z270E-GAMING/HelpDesk_Download/

270-E website? That works on the z370-e?

[STRESSMASTER]

sorry that was just a help link try this.

https://www.asus.com/us/Motherboards/ROG-STRIX-Z370-E-GAMING/

or

https://www.asus.com/us/Motherboards/ROG-STRIX-Z370-E-GAMING/HelpDesk_Download/

Version 0615 is newest

3 minutes ago, Vuxx said:

270-E website? That works on the z370-e?

 

[Vuxx]

Just now, STRESSMASTER said:

sorry that was just a help link try this.

https://www.asus.com/us/Motherboards/ROG-STRIX-Z370-E-GAMING/

 

Alright, don't know about my ram anymore. On ebuyer, I bought DIMM ram, it arrived in a box with a sticker saying UDIMM ram, I thought it was a mixup at the time.

[Vuxx]

14 minutes ago, STRESSMASTER said:

sorry that was just a help link try this.

https://www.asus.com/us/Motherboards/ROG-STRIX-Z370-E-GAMING/

or

https://www.asus.com/us/Motherboards/ROG-STRIX-Z370-E-GAMING/HelpDesk_Download/

Version 0615 is newest

 

https://www.ebuyer.com/743584-hyperx-fury-8gb-2400mhz-ddr4-cl15-dimm-black-memory-hx424c15fb2-8

[STRESSMASTER]

6 minutes ago, Vuxx said:

https://www.ebuyer.com/743584-hyperx-fury-8gb-2400mhz-ddr4-cl15-dimm-black-memory-hx424c15fb2-8

http://dlcdnet.asus.com/pub/ASUS/mb/LGA1151/ROG_STRIX_Z370-E_GAMING/ROG-STRIX-Z370-E-GAMING_Memory-QVL_20180223.pdf

see if your RAM part number is in this document. If not it is not a QVL part than you probably should try to return it for one that is one the list if you can.

 

though that RAM is the right one. any DDR4 ram would work but sometimes when not on the QVL you have issues.

[STRESSMASTER]

9 minutes ago, Vuxx said:

https://www.ebuyer.com/743584-hyperx-fury-8gb-2400mhz-ddr4-cl15-dimm-black-memory-hx424c15fb2-8

 

4 minutes ago, STRESSMASTER said:

http://dlcdnet.asus.com/pub/ASUS/mb/LGA1151/ROG_STRIX_Z370-E_GAMING/ROG-STRIX-Z370-E-GAMING_Memory-QVL_20180223.pdf

see if your RAM part number is in this document. If not it is not a QVL part than you probably should try to return it for one that is one the list if you can.

 

though that RAM is the right one. any DDR4 ram would work but sometimes when not on the QVL you have issues.

I did find that the RAM you have IS on the QVL. So at this point check to be sure the motherboard is not touching the case or anything else it should not. If all that is good than you may have a bad motherboard and you should call ASUS customer support.

[Vuxx]

1 minute ago, STRESSMASTER said:

 

I did find that the RAM you have IS on the QVL. So at this point check to be sure the motherboard is not touching the case or anything else it should not. If all that is good than you may have a bad motherboard and you should call ASUS customer support.

Yep, nothing touching my case. This is beginning to piss me off

[STRESSMASTER]

@Vuxx well the only thing left you can do is call ASUS phone number for your region and talk with them. There is not much more I can think of or that I have been able to find on google. sorry we couldn't get it working like I hoped.

[Vuxx]

8 minutes ago, STRESSMASTER said:

 

I did find that the RAM you have IS on the QVL. So at this point check to be sure the motherboard is not touching the case or anything else it should not. If all that is good than you may have a bad motherboard and you should call ASUS customer support.

Don't know what I did.

[STRESSMASTER]

1 minute ago, Vuxx said:

Don't know what I did.

you probably ended up wiggling a cord that was having a lose connection in the 8-pin. I am very glad it is working now.