Help Installing A New Liquid Cooled CPU

[Nofvlerhe]

Hello everyone.

So the other day I ordered a Corsair H60 Liquid Cooler for my CPU, as I was in dire need of a new one. 

The the reason I am posting this is for two reasons, one being because I’ve never had a Liquid Cooler before and two because I’m having difficulties installing it.

 

This is where I’m having difficulties, the fan attached to the radiator has a connector that is 4 Pins, and the Pump that connects to the CPU itself has a connector that is 3 Pins, as well as the SATA Power Cable. However my motherboard has two ports, one labeled SYSFAN1 and the other CPUFAN. However both are 4 Pins? So what do I do?

 

I’ve already posted about this on TomsHardware, but I have yet to receive anything that is of at all use.

 

Also, I have a 760GMA-P34 (FX) paired with an AMD FX-6300.

Thanks!

[iRileyx]

connect the 3 pin from the pump onto the cpufan header, and the radiator fan onto the sysfan header.

[MellowCream]

You can plug in a 3 pin fan into a 4 pin header or vise versa with no problem. The only issue is, if you plug in a 4 pin fan into a 3 pin header, you get no PWM fan control. 

 

According to the manual, plug the 3 pin pump connector to the 4 pin CPU header, and the radiator fan to the SYSFAN header.

 

https://www.manualslib.com/manual/405982/Corsair-Hydro-H60.html?page=2#manual

 

[Nofvlerhe]

Alright, thanks for the help! Also keep in mind that the H60 is the 2018 Version. So all of this should still work, right?

[Nofvlerhe]

One more question, I plug in the SATA Cable to the little SATA Cable that extends from the PSU right?