Jump to content

So im looking to build a new computer relatively soon and i know now probably isnt a good time to build a computer but yea...

With the computer im planning to play games like GTAV, League of Legends and PUBG on a 144hz 2k monitor

Plan to run those games max setting with at least 80fps avg

Might get 2 monitors eventually 1st being 144hz 2k (main) and 2nd being a 4k 60hz/another 144hz 2k monitor

Budget is around 3.2k SGD

 

My current build pc building plan:

ASROCK Z370 TAICHI + I8700K
PHANTEKS ECLIPSE P400 TG
SAMSUNG 860 EVO 250GB M.2
TOSHIBA 1TB 7200 RPM
CORSAIR VENGEANCE LPX RGB 3000MHZ CL16 ( 8GBx2pcs )
CORSAIR H100i V2 LIQUID CPU COOLER
Leadex Gold II 750W

ZOTAC GTX 1080 Ti 11GB AMP

 

Will a 1080ti be needed or will a 1080 be enough??

Link to comment
https://linustechtips.com/topic/909109-please-help/
Share on other sites

Link to post
Share on other sites

1080ti is mandatory because PUBG's optimization is bad (was garbage, later improved to bad). Other games will run fine with a 1080 or 1070ti (these two are very much alike).

 

do NOT buy zotac amp or amp extreme 1080ti. VRM cooling sucks, which shortens their lifespan.

CPU: i7-2600K 4751MHz 1.44V (software) --> 1.47V at the back of the socket Motherboard: Asrock Z77 Extreme4 (BCLK: 103.3MHz) CPU Cooler: Noctua NH-D15 RAM: Adata XPG 2x8GB DDR3 (XMP: 2133MHz 10-11-11-30 CR2, custom: 2203MHz 10-11-10-26 CR1 tRFC:230 tREFI:14000) GPU: Asus GTX 1070 Dual (Super Jetstream vbios, +70(2025-2088MHz)/+400(8.8Gbps)) SSD: Samsung 840 Pro 256GB (main boot drive), Transcend SSD370 128GB PSU: Seasonic X-660 80+ Gold Case: Antec P110 Silent, 5 intakes 1 exhaust Monitor: AOC G2460PF 1080p 144Hz (150Hz max w/ DP, 121Hz max w/ HDMI) TN panel Keyboard: Logitech G610 Orion (Cherry MX Blue) with SteelSeries Apex M260 keycaps Mouse: BenQ Zowie FK1

 

Model: HP Omen 17 17-an110ca CPU: i7-8750H (0.125V core & cache, 50mV SA undervolt) GPU: GTX 1060 6GB Mobile (+80/+450, 1650MHz~1750MHz 0.78V~0.85V) RAM: 8+8GB DDR4-2400 18-17-17-39 2T Storage: HP EX920 1TB PCIe x4 M.2 SSD + Crucial MX500 1TB 2.5" SATA SSD, 128GB Toshiba PCIe x2 M.2 SSD (KBG30ZMV128G) gone cooking externally, 1TB Seagate 7200RPM 2.5" HDD (ST1000LM049-2GH172) left outside Monitor: 1080p 126Hz IPS G-sync

 

Desktop benching:

Cinebench R15 Single thread:168 Multi-thread: 833 

SuperPi (v1.5 from Techpowerup, PI value output) 16K: 0.100s 1M: 8.255s 32M: 7m 45.93s

Link to comment
https://linustechtips.com/topic/909109-please-help/#findComment-11170476
Share on other sites

Link to post
Share on other sites

8 minutes ago, BOBOTanker said:

@Jurrunio I chose a 1080ti amp because it like the cheapest card here in Singapore at like $1299 compared to like 1080ti G1 Gaming which used to be the cheapest 1080ti card but now its 1.5k

You can add thermal pad between the VRM heatsink and main cooler heatsink to make things better, but that requires taking apart the card yourself. Might throw off the warranty as well.

CPU: i7-2600K 4751MHz 1.44V (software) --> 1.47V at the back of the socket Motherboard: Asrock Z77 Extreme4 (BCLK: 103.3MHz) CPU Cooler: Noctua NH-D15 RAM: Adata XPG 2x8GB DDR3 (XMP: 2133MHz 10-11-11-30 CR2, custom: 2203MHz 10-11-10-26 CR1 tRFC:230 tREFI:14000) GPU: Asus GTX 1070 Dual (Super Jetstream vbios, +70(2025-2088MHz)/+400(8.8Gbps)) SSD: Samsung 840 Pro 256GB (main boot drive), Transcend SSD370 128GB PSU: Seasonic X-660 80+ Gold Case: Antec P110 Silent, 5 intakes 1 exhaust Monitor: AOC G2460PF 1080p 144Hz (150Hz max w/ DP, 121Hz max w/ HDMI) TN panel Keyboard: Logitech G610 Orion (Cherry MX Blue) with SteelSeries Apex M260 keycaps Mouse: BenQ Zowie FK1

 

Model: HP Omen 17 17-an110ca CPU: i7-8750H (0.125V core & cache, 50mV SA undervolt) GPU: GTX 1060 6GB Mobile (+80/+450, 1650MHz~1750MHz 0.78V~0.85V) RAM: 8+8GB DDR4-2400 18-17-17-39 2T Storage: HP EX920 1TB PCIe x4 M.2 SSD + Crucial MX500 1TB 2.5" SATA SSD, 128GB Toshiba PCIe x2 M.2 SSD (KBG30ZMV128G) gone cooking externally, 1TB Seagate 7200RPM 2.5" HDD (ST1000LM049-2GH172) left outside Monitor: 1080p 126Hz IPS G-sync

 

Desktop benching:

Cinebench R15 Single thread:168 Multi-thread: 833 

SuperPi (v1.5 from Techpowerup, PI value output) 16K: 0.100s 1M: 8.255s 32M: 7m 45.93s

Link to comment
https://linustechtips.com/topic/909109-please-help/#findComment-11170499
Share on other sites

Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

×