Jump to content

Accessing Plex server outside home network

So when I'm at home and go to the remote access tab on my plex server the red exclamation immediately turns into a green checkmark. For some reason however I have to click on that tab for the outside IP to resolve. I don't know if this is because the public IP provided by my ISP changes every so often? I haven't looked.... 

 

If I used the dynamic dns feature built into my modem would that solve my problem?

 

Thanks

Work Desktop | CPU: Intel Core i7 4770k | GPU: Quadro K1200 | Motherboard: EVGA Z97 Classified | RAM: Corsair Dominator Platinum 32GB (4x8GB) DDR3-2133Mhz | PSU: Seasonic 750W SS-750KM3 80 PLUS Gold | STORAGE: WD 1TB Se Enterprise Grade Drive & Corsair Neutron NX500 400GB NVMe PCIe  | COOLER: Enermax Liqtech 240 -  5x Noctua NF-F12 iPPC 2000 PWM | CASE: Corsair 600C | OS: Windows 10 Pro | Peripherals: Logitech MX Master 2S -- Logitech K840 -- INTEL X520 10Gb NIC -- 3x Acer H236HL -- Build Log | 

 

Work Server | CPU: Intel Xeon E5-2650 v3 | Model: Cisco UCS C220 M4 (SFF) | RAM: 64GB (4x16GB) Cisco (Samsung) DDR4 2133Mhz | STORAGE: 4x Cisco (Seagate) 900GB 10K 2.5" (RAID 10) - 2x 32GB Cisco FlexFlash Boot Drive (RAID 1) | OS: vSphere 6.7 Enterprise Plus U3 | 

 

Laptop | CPU: Intel Core i7 6700HQ | GPU: Nvidia GTX 960M 2GB GDDR5 | RAM: 32GB (2 x 16GB) DDR4-2400Mhz | STORAGE: 512GB Hynix NVMe | OS: Windows 10 Pro |

 

Gaming Desktop | CPU: Intel Core i7 9700K | GPU: Gigabyte RTX 2080 WINDFORCE 8G  | Motherboard: ASRock Z390 PHANTOM GAMING-ITX | RAM: Ballistix Elite 32GB Kit (16GB x 2) DDR4-3000 | PSU: Silverstone SX700-LPT 700w 80 PLUS Platinum | STORAGE: 2x Samsung 970 PRO 1TB NVMe | COOLER: Noctua NH-L12 | CASE: Louqe Ghost S1 | OS: Windows 10 Pro | Build Log in Progress | 

 

Home Server | CPU: Intel Xeon E5-2690 (Sandy Bridge) | GPU: Quadro P2000 | Motherboard: SUPERMICRO X9SRL-F  | RAM: 64GB (8x8GB) Micron VLP DDR3-1600 ECC | PSU: SUPERMICRO 665W 80 PLUS Bronze | STORAGE: 2x Samsung 860 EVO 500GB (RAID 1) - 4x WD 8TB Ultrastar (RAID 10) - Intel SSD D3-S4510 Series 240GB (BOOT)  | COOLER: Noctua NH-U12DXi4 with 2x Noctua NF-F12 iPPC 3000 PWM | CASE: SUPERMICRO CSE-842TQ-665B 4U | OS: vSphere 6.7 Enterprise Plus U3 | Build Log in Progress |

 

| Pixel 4XL 128GB - Clearly White - Unlocked - Carrier: Visible |

 

| F@H STATS |

Link to comment
Share on other sites

Link to post
Share on other sites

Not sure how plex works, but networking in general I got:
 

  1. you likely have a dynamic IP address at home, like you mentioned.
  2. you can use a dynamic dns service like what is built in to the router to get around this. then, if you want to navigate to your server, put the DDNS address where the hostname or IP would normally go
    1. you can buy a domain and forward it to the ddns address, but that's not free, a pain, and unnecessary
  3. once this is set up, i imagine plex needs you to forward some ports. so in your router, reserve an internal IP address (like 192.168.0.110, for example) for your plex server, then forward the necessary ports for that IP on your router.
  4. you should be good to go

Main Rig: R9 5950X @ PBO, RTX 3090, 64 GB DDR4 3666, InWin 101, Full Hardline Watercooling

Server: R7 1700X @ 4.0 GHz, GTX 1080 Ti, 32GB DDR4 3000, Cooler Master NR200P, Full Soft Watercooling

LAN Rig: R5 3600X @ PBO, RTX 2070, 32 GB DDR4 3200, Dan Case A4-SFV V4, 120mm AIO for the CPU

HTPC: i7-7700K @ 4.6 GHz, GTX 1050 Ti, 16 GB DDR4 3200, AliExpress K39, IS-47K Cooler

Router: R3 2200G @ stock, 4GB DDR4 2400, what are cases, stock cooler
 

I don't have a problem...

Link to comment
Share on other sites

Link to post
Share on other sites

When this issue happened to me I had to double and triple check my port forwarding rules on my router. Plex is very specific about open ports. Your ISP shouldn't change your public IP that often. I've had the same IP address for 2 years now

My Gaming Rig: AMD Ryzen 5600x  |  Corsair H100i GTX  |  ASUS ROG Strix B450-F Gaming  |  32GB Samsung DDR4 3600MHz  |  ASUS RTX 3070 ROG Strix  |  WD Black 240GB NVMe  |  1TB Samsung 850 Pro SSD | 2TB Samsung Enterprise SSD  |  WD Black 1.5TB   |  3x NZXT Aer RGB 140MM  |  Seasonic Focus 750w   |  NZXT H500 Elite   |  Windows 10 Pro

 

My Home Server: AMD Ryzen 1400x  |  Gigabyte Aurora B550 Elite  |  32Gb Samsung DDR3 3200Mhz  |  HP RTX 2060 6GB  |  1TB Samsung 850 Pro  |  2x Seagate IronWolf Pro 18TB | 3x Seagate IronWolf Pro 4TB |  2x WD Green 2TB  |  Corsair CX650m  | Bitfenix Shinobi | Windows Server 2022

Link to comment
Share on other sites

Link to post
Share on other sites

7 hours ago, AMD Lover said:

So when I'm at home and go to the remote access tab on my plex server the red exclamation immediately turns into a green checkmark. For some reason however I have to click on that tab for the outside IP to resolve. I don't know if this is because the public IP provided by my ISP changes every so often? I haven't looked.... 

 

If I used the dynamic dns feature built into my modem would that solve my problem?

 

Thanks

How often they change your IP varies. I know people who have had the same IP for over a year and people who have had their IP's changed every day. Using a service like No IP will stop any issues, but the fact is, you need to make sure you are port forwarded properly thru the routers firewall. 

 

I think there is a setting in plex to make your stuff accessible outside the network. I remember when I installed plex that was an option, I choose not to enable it myself. 

I just want to sit back and watch the world burn. 

Link to comment
Share on other sites

Link to post
Share on other sites

On 3/25/2018 at 9:11 AM, lieder1987 said:

It wont work through a VPN that is a problem I am running into.

I don't run a VPN

Work Desktop | CPU: Intel Core i7 4770k | GPU: Quadro K1200 | Motherboard: EVGA Z97 Classified | RAM: Corsair Dominator Platinum 32GB (4x8GB) DDR3-2133Mhz | PSU: Seasonic 750W SS-750KM3 80 PLUS Gold | STORAGE: WD 1TB Se Enterprise Grade Drive & Corsair Neutron NX500 400GB NVMe PCIe  | COOLER: Enermax Liqtech 240 -  5x Noctua NF-F12 iPPC 2000 PWM | CASE: Corsair 600C | OS: Windows 10 Pro | Peripherals: Logitech MX Master 2S -- Logitech K840 -- INTEL X520 10Gb NIC -- 3x Acer H236HL -- Build Log | 

 

Work Server | CPU: Intel Xeon E5-2650 v3 | Model: Cisco UCS C220 M4 (SFF) | RAM: 64GB (4x16GB) Cisco (Samsung) DDR4 2133Mhz | STORAGE: 4x Cisco (Seagate) 900GB 10K 2.5" (RAID 10) - 2x 32GB Cisco FlexFlash Boot Drive (RAID 1) | OS: vSphere 6.7 Enterprise Plus U3 | 

 

Laptop | CPU: Intel Core i7 6700HQ | GPU: Nvidia GTX 960M 2GB GDDR5 | RAM: 32GB (2 x 16GB) DDR4-2400Mhz | STORAGE: 512GB Hynix NVMe | OS: Windows 10 Pro |

 

Gaming Desktop | CPU: Intel Core i7 9700K | GPU: Gigabyte RTX 2080 WINDFORCE 8G  | Motherboard: ASRock Z390 PHANTOM GAMING-ITX | RAM: Ballistix Elite 32GB Kit (16GB x 2) DDR4-3000 | PSU: Silverstone SX700-LPT 700w 80 PLUS Platinum | STORAGE: 2x Samsung 970 PRO 1TB NVMe | COOLER: Noctua NH-L12 | CASE: Louqe Ghost S1 | OS: Windows 10 Pro | Build Log in Progress | 

 

Home Server | CPU: Intel Xeon E5-2690 (Sandy Bridge) | GPU: Quadro P2000 | Motherboard: SUPERMICRO X9SRL-F  | RAM: 64GB (8x8GB) Micron VLP DDR3-1600 ECC | PSU: SUPERMICRO 665W 80 PLUS Bronze | STORAGE: 2x Samsung 860 EVO 500GB (RAID 1) - 4x WD 8TB Ultrastar (RAID 10) - Intel SSD D3-S4510 Series 240GB (BOOT)  | COOLER: Noctua NH-U12DXi4 with 2x Noctua NF-F12 iPPC 3000 PWM | CASE: SUPERMICRO CSE-842TQ-665B 4U | OS: vSphere 6.7 Enterprise Plus U3 | Build Log in Progress |

 

| Pixel 4XL 128GB - Clearly White - Unlocked - Carrier: Visible |

 

| F@H STATS |

Link to comment
Share on other sites

Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

×