single LED light for my case

[hardtofindinthefuture]

I have a OEM case and i quite like it

it looks like this

That vent, i want it to light up

But a strip would be too big

 

Is there a small light or small strip that i can put in there

 

Thannnnkkks

[emosun]

strips have cut points to make them shorter if you want.

[Theguywhobea]

Buy 1 LED, and like, 2 coin cell batteries, tape the LED to the coin cell batteries, there ya go.

[hardtofindinthefuture]

1 minute ago, Theguywhobea said:

Buy 1 LED, and like, 2 coin cell batteries, tape the LED to the coin cell batteries, there ya go.

Good idea, BUT i would have to open my case to assess the led to turn on and off

[Theguywhobea]

Just now, v0nn_toaster said:

Good idea, BUT i would have to open my case to assess the led to turn on and off

Yeah, just leave it on all the time.

[hardtofindinthefuture]

Just now, Theguywhobea said:

Yeah, just leave it on all the time.

i could always go down to the local radio shack, (if its still there) and get a switch and run it out of a knocked out PCI slot

[Theguywhobea]

2 minutes ago, v0nn_toaster said:

i could always go down to the local radio shack, (if its still there) and get a switch and run it out of a knocked out PCI slot

Okay, what about this: https://www.newegg.com/Product/Product.aspx?Item=N82E16811997124&cm_re=led_strips-_-11-997-124-_-Product

[hardtofindinthefuture]

Just now, Theguywhobea said:

Okay, what about this: https://www.newegg.com/Product/Product.aspx?Item=N82E16811997124&cm_re=led_strips-_-11-997-124-_-Product

thats perfect