Jump to content

OC cpu with offset mode ?

PSP.
By PSP.
in CPUs, Motherboards, and Memory
 Share
Posted

Hello

My motherboard is asus prime b350m-a and my cpu is ryzen 5 1600

i want oc my ryzen to 3.6 or 3.7

i already have idea about voltage 1.3 and  1.23

but offset mode + or - and what is offset mode did 0.2 is like 1.3 

what is Calculations ??

now my cpu is auto i didnt oc cpu yet and voltage sometimes 1.394 or 1.385 or less ( didnt above than 1.394 )

 this auto without OC

 

now want oc with offset mode look this video i didnt understand offset mode ( there no manual )

 

 what is Calculations ??

I do not know the key to success, but the key to failure is trying to please everyone

Link to comment
https://linustechtips.com/topic/888932-oc-cpu-with-offset-mode/
Share on other sites
Link to post
Share on other sites
Posted

'Auto voltage (determined by mobo)' + 'offset value' = 'Applied voltage to the CPU'.

 

That's what offset mode does.

CPU: i7-2600K 4751MHz 1.44V (software) --> 1.47V at the back of the socket Motherboard: Asrock Z77 Extreme4 (BCLK: 103.3MHz) CPU Cooler: Noctua NH-D15 RAM: Adata XPG 2x8GB DDR3 (XMP: 2133MHz 10-11-11-30 CR2, custom: 2203MHz 10-11-10-26 CR1 tRFC:230 tREFI:14000) GPU: Asus GTX 1070 Dual (Super Jetstream vbios, +70(2025-2088MHz)/+400(8.8Gbps)) SSD: Samsung 840 Pro 256GB (main boot drive), Transcend SSD370 128GB PSU: Seasonic X-660 80+ Gold Case: Antec P110 Silent, 5 intakes 1 exhaust Monitor: AOC G2460PF 1080p 144Hz (150Hz max w/ DP, 121Hz max w/ HDMI) TN panel Keyboard: Logitech G610 Orion (Cherry MX Blue) with SteelSeries Apex M260 keycaps Mouse: BenQ Zowie FK1

 

Model: HP Omen 17 17-an110ca CPU: i7-8750H (0.125V core & cache, 50mV SA undervolt) GPU: GTX 1060 6GB Mobile (+80/+450, 1650MHz~1750MHz 0.78V~0.85V) RAM: 8+8GB DDR4-2400 18-17-17-39 2T Storage: HP EX920 1TB PCIe x4 M.2 SSD + Crucial MX500 1TB 2.5" SATA SSD, 128GB Toshiba PCIe x2 M.2 SSD (KBG30ZMV128G) gone cooking externally, 1TB Seagate 7200RPM 2.5" HDD (ST1000LM049-2GH172) left outside Monitor: 1080p 126Hz IPS G-sync

 

Desktop benching:

Cinebench R15 Single thread:168 Multi-thread: 833 

SuperPi (v1.5 from Techpowerup, PI value output) 16K: 0.100s 1M: 8.255s 32M: 7m 45.93s

Link to comment
https://linustechtips.com/topic/888932-oc-cpu-with-offset-mode/#findComment-10967391
Share on other sites
Link to post
Share on other sites
Posted
  • Author
35 minutes ago, Jurrunio said:

'Auto voltage (determined by mobo)' + 'offset value' = 'Applied voltage to the CPU'.

 

That's what offset mode does.

that normal i oc at 3.7 and auto voltage ?

I do not know the key to success, but the key to failure is trying to please everyone

Link to comment
https://linustechtips.com/topic/888932-oc-cpu-with-offset-mode/#findComment-10967481
Share on other sites
Link to post
Share on other sites
Posted
5 minutes ago, Fahad ALme said:

that normal i oc at 3.7 and auto voltage ?

cannot answer unless you tell me the actual value (number) of volts to the CPU

CPU: i7-2600K 4751MHz 1.44V (software) --> 1.47V at the back of the socket Motherboard: Asrock Z77 Extreme4 (BCLK: 103.3MHz) CPU Cooler: Noctua NH-D15 RAM: Adata XPG 2x8GB DDR3 (XMP: 2133MHz 10-11-11-30 CR2, custom: 2203MHz 10-11-10-26 CR1 tRFC:230 tREFI:14000) GPU: Asus GTX 1070 Dual (Super Jetstream vbios, +70(2025-2088MHz)/+400(8.8Gbps)) SSD: Samsung 840 Pro 256GB (main boot drive), Transcend SSD370 128GB PSU: Seasonic X-660 80+ Gold Case: Antec P110 Silent, 5 intakes 1 exhaust Monitor: AOC G2460PF 1080p 144Hz (150Hz max w/ DP, 121Hz max w/ HDMI) TN panel Keyboard: Logitech G610 Orion (Cherry MX Blue) with SteelSeries Apex M260 keycaps Mouse: BenQ Zowie FK1

 

Model: HP Omen 17 17-an110ca CPU: i7-8750H (0.125V core & cache, 50mV SA undervolt) GPU: GTX 1060 6GB Mobile (+80/+450, 1650MHz~1750MHz 0.78V~0.85V) RAM: 8+8GB DDR4-2400 18-17-17-39 2T Storage: HP EX920 1TB PCIe x4 M.2 SSD + Crucial MX500 1TB 2.5" SATA SSD, 128GB Toshiba PCIe x2 M.2 SSD (KBG30ZMV128G) gone cooking externally, 1TB Seagate 7200RPM 2.5" HDD (ST1000LM049-2GH172) left outside Monitor: 1080p 126Hz IPS G-sync

 

Desktop benching:

Cinebench R15 Single thread:168 Multi-thread: 833 

SuperPi (v1.5 from Techpowerup, PI value output) 16K: 0.100s 1M: 8.255s 32M: 7m 45.93s

Link to comment
https://linustechtips.com/topic/888932-oc-cpu-with-offset-mode/#findComment-10967498
Share on other sites
Link to post
Share on other sites
Posted
  • Author
57 minutes ago, Jurrunio said:

cannot answer unless you tell me the actual value (number) of volts to the CPU

Thx this pic by bios auto run 1.387

and i watching core voltage not above than 1.384

https://ibb.co/d6mBob

 

and 3 cpu program

https://ibb.co/gzv48b

can zoom 

socket cooling came with ryzen oc at 3.6 with this voltage is fine ?

I do not know the key to success, but the key to failure is trying to please everyone

Link to comment
https://linustechtips.com/topic/888932-oc-cpu-with-offset-mode/#findComment-10967678
Share on other sites
Link to post
Share on other sites
Posted
3 minutes ago, Fahad ALme said:

Thx this pic by bios auto run 1.387

and i watching core voltage not above than 1.384

https://ibb.co/d6mBob

 

and 3 cpu program

https://ibb.co/gzv48b

can zoom 

socket cooling came with ryzen oc at 3.6 with this voltage is fine ?

In HWmonitor, vcore  under motherboard data is what to look for.

 

This voltage is enough for CPU to get 3.8, maybe more. Just make sure it never climbs above 1.4V

CPU: i7-2600K 4751MHz 1.44V (software) --> 1.47V at the back of the socket Motherboard: Asrock Z77 Extreme4 (BCLK: 103.3MHz) CPU Cooler: Noctua NH-D15 RAM: Adata XPG 2x8GB DDR3 (XMP: 2133MHz 10-11-11-30 CR2, custom: 2203MHz 10-11-10-26 CR1 tRFC:230 tREFI:14000) GPU: Asus GTX 1070 Dual (Super Jetstream vbios, +70(2025-2088MHz)/+400(8.8Gbps)) SSD: Samsung 840 Pro 256GB (main boot drive), Transcend SSD370 128GB PSU: Seasonic X-660 80+ Gold Case: Antec P110 Silent, 5 intakes 1 exhaust Monitor: AOC G2460PF 1080p 144Hz (150Hz max w/ DP, 121Hz max w/ HDMI) TN panel Keyboard: Logitech G610 Orion (Cherry MX Blue) with SteelSeries Apex M260 keycaps Mouse: BenQ Zowie FK1

 

Model: HP Omen 17 17-an110ca CPU: i7-8750H (0.125V core & cache, 50mV SA undervolt) GPU: GTX 1060 6GB Mobile (+80/+450, 1650MHz~1750MHz 0.78V~0.85V) RAM: 8+8GB DDR4-2400 18-17-17-39 2T Storage: HP EX920 1TB PCIe x4 M.2 SSD + Crucial MX500 1TB 2.5" SATA SSD, 128GB Toshiba PCIe x2 M.2 SSD (KBG30ZMV128G) gone cooking externally, 1TB Seagate 7200RPM 2.5" HDD (ST1000LM049-2GH172) left outside Monitor: 1080p 126Hz IPS G-sync

 

Desktop benching:

Cinebench R15 Single thread:168 Multi-thread: 833 

SuperPi (v1.5 from Techpowerup, PI value output) 16K: 0.100s 1M: 8.255s 32M: 7m 45.93s

Link to comment
https://linustechtips.com/topic/888932-oc-cpu-with-offset-mode/#findComment-10967689
Share on other sites
Link to post
Share on other sites
Posted
  • Author
27 minutes ago, Jurrunio said:

In HWmonitor, vcore  under motherboard data is what to look for.

 

This voltage is enough for CPU to get 3.8, maybe more. Just make sure it never climbs above 1.4V

its moment sometimes in cpu Z 1.406 and moving not stable voltage number

i saw temp and test Heaven Benchmark x3 and tomb raider the temp max 55

Vcore  in HWmonitor sometimes also between 1.373 and  1.406 ( max 1.406 )

I do not know the key to success, but the key to failure is trying to please everyone

Link to comment
https://linustechtips.com/topic/888932-oc-cpu-with-offset-mode/#findComment-10967763
Share on other sites
Link to post
Share on other sites
Posted
  • Author
33 minutes ago, Jurrunio said:

In HWmonitor, vcore  under motherboard data is what to look for.

 

This voltage is enough for CPU to get 3.8, maybe more. Just make sure it never climbs above 1.4V

look here 

https://ibb.co/kaTAEG

 

ok this max 1.406 maybe changing ?

I do not know the key to success, but the key to failure is trying to please everyone

Link to comment
https://linustechtips.com/topic/888932-oc-cpu-with-offset-mode/#findComment-10967804
Share on other sites
Link to post
Share on other sites
Posted
2 minutes ago, Fahad ALme said:

look here 

https://ibb.co/kaTAEG

 

ok this max 1.406 maybe changing ?

it will bounce a bit

 

 

CPU: i7-2600K 4751MHz 1.44V (software) --> 1.47V at the back of the socket Motherboard: Asrock Z77 Extreme4 (BCLK: 103.3MHz) CPU Cooler: Noctua NH-D15 RAM: Adata XPG 2x8GB DDR3 (XMP: 2133MHz 10-11-11-30 CR2, custom: 2203MHz 10-11-10-26 CR1 tRFC:230 tREFI:14000) GPU: Asus GTX 1070 Dual (Super Jetstream vbios, +70(2025-2088MHz)/+400(8.8Gbps)) SSD: Samsung 840 Pro 256GB (main boot drive), Transcend SSD370 128GB PSU: Seasonic X-660 80+ Gold Case: Antec P110 Silent, 5 intakes 1 exhaust Monitor: AOC G2460PF 1080p 144Hz (150Hz max w/ DP, 121Hz max w/ HDMI) TN panel Keyboard: Logitech G610 Orion (Cherry MX Blue) with SteelSeries Apex M260 keycaps Mouse: BenQ Zowie FK1

 

Model: HP Omen 17 17-an110ca CPU: i7-8750H (0.125V core & cache, 50mV SA undervolt) GPU: GTX 1060 6GB Mobile (+80/+450, 1650MHz~1750MHz 0.78V~0.85V) RAM: 8+8GB DDR4-2400 18-17-17-39 2T Storage: HP EX920 1TB PCIe x4 M.2 SSD + Crucial MX500 1TB 2.5" SATA SSD, 128GB Toshiba PCIe x2 M.2 SSD (KBG30ZMV128G) gone cooking externally, 1TB Seagate 7200RPM 2.5" HDD (ST1000LM049-2GH172) left outside Monitor: 1080p 126Hz IPS G-sync

 

Desktop benching:

Cinebench R15 Single thread:168 Multi-thread: 833 

SuperPi (v1.5 from Techpowerup, PI value output) 16K: 0.100s 1M: 8.255s 32M: 7m 45.93s

Link to comment
https://linustechtips.com/topic/888932-oc-cpu-with-offset-mode/#findComment-10967810
Share on other sites
Link to post
Share on other sites
Posted
  • Author
13 minutes ago, Jurrunio said:

it will bounce a bit

 

 

ok i tested asus rog bruner i think you know it

make cpu 99% usage

my temp go max 74

voltage didnt above got max 1.417

i think i will back to normal without oc

i will try know what offset mode can stable with ryzen

 

thank you

 

I do not know the key to success, but the key to failure is trying to please everyone

Link to comment
https://linustechtips.com/topic/888932-oc-cpu-with-offset-mode/#findComment-10967848
Share on other sites
Link to post
Share on other sites
Posted
  • Author

Hello again

now i have idea how offset mode works

i made video in youtube using asus burner make cpu 99% usgae

i got max temp 65 no above

max voltage 1.319 while testing cpu bruner

min 1.134

 value 1.286 around

oc`d at 3,7

 

please mute video ( recorded before 1 hour )

did need more lower voltage or increase ?

I do not know the key to success, but the key to failure is trying to please everyone

Link to comment
https://linustechtips.com/topic/888932-oc-cpu-with-offset-mode/#findComment-10970395
Share on other sites
Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing CPUs, Motherboards, and Memory

×