Jump to content

Ran some benchmarks

Nytrite
By Nytrite
in Laptops and Pre-Built Systems
 Share
Posted
Quote

make sure windows is updated first.

 

msi afterburner to check gpu clocks

hwinfo to check everything else

 

unigine heaven on loop (run at for at least 15-20min to check for temps, or until temps stabilize)

run it with OCCT for CPU pushing

^ run these to check for temps

 

aida64 is nice too. 

 

play some games on it because sometimes game will find things benches don't, make sure you run heavy demanding games so like Witcher 3 or any of the newer triple A games that can push the system.

 

use crystaldiskmark to check the drives to see if they run properly or damage

I was told to run some benchmarks and here are the results: https://imgur.com/a/ABueS

Care to help me figure out if there's anything wrong?

 

First off, I was wondering why it only has 4095mb in the graphics card part when they advertised it to be 6GB GDDR5. Maybe I'm missing something. Also if I'm not mistaken, I think my SSD's 256GB when I'm suppose to only have 128GB (not a problem though). By the way, still haven't ran any games yet.

 

Thanks for the help!

 

EDIT: People are pointing out that my FPS is too low due to Unigine running using the iGPU. Can anyone explain/help how to use the dGPU instead or is it normal since I'm running OCCT and Unigine simultaneously?

Link to comment
https://linustechtips.com/topic/860110-ran-some-benchmarks/
Share on other sites
Link to post
Share on other sites
Posted
8 minutes ago, Nytrite said:

I was told to run some benchmarks and here are the results: https://imgur.com/a/ABueS

Care to help me figure out if there's anything wrong?

 

First off, I was wondering why it only has 4095mb in the graphics card part when they advertised it to be 6GB GDDR5. Maybe I'm missing something. Also if I'm not mistaken, I think my SSD's 256GB when I'm suppose to only have 128GB (not a problem though). By the way, still haven't ran any games yet.

 

Thanks for the help!

so what is your problem next to the crazy low fps

ask me about your system builds, AIO's, CPU's, PSU's, and GPU's.

Link to comment
https://linustechtips.com/topic/860110-ran-some-benchmarks/#findComment-10701628
Share on other sites
Link to post
Share on other sites
Posted

im pretty sure that Heaven is running of the IGPU here

I spent $2500 on building my PC and all i do with it is play no games atm & watch anime at 1080p(finally) watch YT and write essays...  nothing, it just sits there collecting dust...

Builds:

The Toaster Project! Northern Bee!

 

The original LAN PC build log! (Old, dead and replaced by The Toaster Project & 5.0)

Spoiler

"Here is some advice that might have gotten lost somewhere along the way in your life. 

 

#1. Treat others as you would like to be treated.

#2. It's best to keep your mouth shut; and appear to be stupid, rather than open it and remove all doubt.

#3. There is nothing "wrong" with being wrong. Learning from a mistake can be more valuable than not making one in the first place.

 

Follow these simple rules in life, and I promise you, things magically get easier. " - MageTank 31-10-2016

 

 

Link to comment
https://linustechtips.com/topic/860110-ran-some-benchmarks/#findComment-10701650
Share on other sites
Link to post
Share on other sites
Posted
  • Author
1 hour ago, Bananasplit_00 said:

im pretty sure that Heaven is running of the IGPU here

May you explain? Thanks! Should I be running it on the dGPU?

2 hours ago, ricksteendam1 said:

so what is your problem next to the crazy low fps

I thought it's because my sister ran both the OCCT and Unigine simultaneously. 

Link to comment
https://linustechtips.com/topic/860110-ran-some-benchmarks/#findComment-10702140
Share on other sites
Link to post
Share on other sites
Posted
23 minutes ago, Nytrite said:

May you explain? Thanks! Should I be running it on the dGPU?

yes, make sure you are plugged in, and i think it should automatically switch to the dGPU which would see you with MUCH better framerates

I spent $2500 on building my PC and all i do with it is play no games atm & watch anime at 1080p(finally) watch YT and write essays...  nothing, it just sits there collecting dust...

Builds:

The Toaster Project! Northern Bee!

 

The original LAN PC build log! (Old, dead and replaced by The Toaster Project & 5.0)

Spoiler

"Here is some advice that might have gotten lost somewhere along the way in your life. 

 

#1. Treat others as you would like to be treated.

#2. It's best to keep your mouth shut; and appear to be stupid, rather than open it and remove all doubt.

#3. There is nothing "wrong" with being wrong. Learning from a mistake can be more valuable than not making one in the first place.

 

Follow these simple rules in life, and I promise you, things magically get easier. " - MageTank 31-10-2016

 

 

Link to comment
https://linustechtips.com/topic/860110-ran-some-benchmarks/#findComment-10702221
Share on other sites
Link to post
Share on other sites
Posted
  • Author
15 minutes ago, Bananasplit_00 said:

yes, make sure you are plugged in, and i think it should automatically switch to the dGPU which would see you with MUCH better framerates

Should I run it with OCCT again or just the Unigine for now? Also how long?

In case I still get low framerates, should I opt for a replacement?

Link to comment
https://linustechtips.com/topic/860110-ran-some-benchmarks/#findComment-10702302
Share on other sites
Link to post
Share on other sites
Posted
Just now, Nytrite said:

Should I run it with OCCT again or just the Unigine for now? Also how long?

In case I still get low framerates, should I opt for a replacement?

if you still get low framerate then you need to check if the NVIDIA driver is installed first. you can run OCCT at the same time or not, would help if you did the test the same but do one without it too if the framerate is still low

I spent $2500 on building my PC and all i do with it is play no games atm & watch anime at 1080p(finally) watch YT and write essays...  nothing, it just sits there collecting dust...

Builds:

The Toaster Project! Northern Bee!

 

The original LAN PC build log! (Old, dead and replaced by The Toaster Project & 5.0)

Spoiler

"Here is some advice that might have gotten lost somewhere along the way in your life. 

 

#1. Treat others as you would like to be treated.

#2. It's best to keep your mouth shut; and appear to be stupid, rather than open it and remove all doubt.

#3. There is nothing "wrong" with being wrong. Learning from a mistake can be more valuable than not making one in the first place.

 

Follow these simple rules in life, and I promise you, things magically get easier. " - MageTank 31-10-2016

 

 

Link to comment
https://linustechtips.com/topic/860110-ran-some-benchmarks/#findComment-10702315
Share on other sites
Link to post
Share on other sites
Posted
  • Author
26 minutes ago, Bananasplit_00 said:

if you still get low framerate then you need to check if the NVIDIA driver is installed first. you can run OCCT at the same time or not, would help if you did the test the same but do one without it too if the framerate is still low

Thanks a bunch! Will post results later tonight:)

Link to comment
https://linustechtips.com/topic/860110-ran-some-benchmarks/#findComment-10702417
Share on other sites
Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing Laptops and Pre-Built Systems

×