Jump to content

still no boot

iam2k10
By iam2k10
in Troubleshooting
 Share
Posted

Hello again

So I reset my bios and got a new PSU and the computer still foesnot boot (show bios or windows) it only cranks my fan speeds to 100% and turns so help please

 

What motherboard?

80+ ratings certify electrical efficiency. Not quality.

 

Link to comment
https://linustechtips.com/topic/85340-still-no-boot/#findComment-1160373
Share on other sites
Link to post
Share on other sites
Posted

Oh shi- no beeps so I'm guessing a broken CPU or mobo?

 

Might also be that your speakers are not plugged in and turned on.

 

Might be your motherboard only sends beep codes to the speaker pins on the front panel header - see front panel header section of your motherboard manual.

 

Might be you are right.

80+ ratings certify electrical efficiency. Not quality.

 

Link to comment
https://linustechtips.com/topic/85340-still-no-boot/#findComment-1164174
Share on other sites
Link to post
Share on other sites
Posted

Usuallly you have to connect a little speaker to the frontpanel connection on the motherboard... modern mobos tend to not have those any more but have a debug led if that one dose not turn on or if no leds turn on and you are save that you connected all the wire correctly i would RMA the mobo.

 

It is not the speaker conntector on the front panel of the case but rater a little tiny speaker that plugs into the pins that are next to the pins where you plug the power button in!

Link to comment
https://linustechtips.com/topic/85340-still-no-boot/#findComment-1166267
Share on other sites
Link to post
Share on other sites
Posted
  • Author

Usuallly you have to connect a little speaker to the frontpanel connection on the motherboard... modern mobos tend to not have those any more but have a debug led if that one dose not turn on or if no leds turn on and you are save that you connected all the wire correctly i would RMA the mobo.

It is not the speaker conntector on the front panel of the case but rater a little tiny speaker that plugs into the pins that are next to the pins where you plug the power button in!

OK but I don't have a speaker for that also I see that there is a exclamation mark at the end of you post I'm am sorry if I have offended you.
Link to comment
https://linustechtips.com/topic/85340-still-no-boot/#findComment-1170598
Share on other sites
Link to post
Share on other sites
Posted

OK but I don't have a speaker for that also I see that there is a exclamation mark at the end of you post I'm am sorry if I have offended you.

 

FYI, if your motherboard doesn't support beep codes being sent to sound system and your case doesn't have a small speaker that plugs into the motherboards front panel header you can always get something like http://www.newegg.com/Product/Product.aspx?Item=N82E16812201032. But at this point I believe you've decided to take the board in to be checked, so wait and see what they say.

80+ ratings certify electrical efficiency. Not quality.

 

Link to comment
https://linustechtips.com/topic/85340-still-no-boot/#findComment-1170619
Share on other sites
Link to post
Share on other sites
Posted

Do you have a multimeter lying around, or possibly a singular LED? 

export PS1='\[\033[1;30m\]┌╼ \[\033[1;32m\]\u@\h\[\033[1;30m\] ╾╼ \[\033[0;34m\]\w\[\033[0;36m\]\n\[\033[1;30m\]└╼ \[\033[1;37m\]'


"All your threads are belong to /dev/null"


| 80's Terminal Keyboard Conversion | $5 Graphics Card Silence Mod Tutorial | 485KH/s R9 270X | The Smallest Ethernet Cable | Ass Pennies | My Screenfetch |

Link to comment
https://linustechtips.com/topic/85340-still-no-boot/#findComment-1171672
Share on other sites
Link to post
Share on other sites
Posted

OK but I don't have a speaker for that also I see that there is a exclamation mark at the end of you post I'm am sorry if I have offended you.

No didnt mean that exclamation mark was a mistake but if you dont have the speaker you might want to maybe get one or borrow one from a friend because its really the only way of figuring this issue out. Or you just try rma the cpu ;)

Link to comment
https://linustechtips.com/topic/85340-still-no-boot/#findComment-1172711
Share on other sites
Link to post
Share on other sites
Posted
  • Author

No didnt mean that exclamation mark was a mistake but if you dont have the speaker you might want to maybe get one or borrow one from a friend because its really the only way of figuring this issue out. Or you just try rma the cpu ;)

OK thanks for the suggestion but I'm trying to save as much money as I can just in case if I need new ram
Link to comment
https://linustechtips.com/topic/85340-still-no-boot/#findComment-1182377
Share on other sites
Link to post
Share on other sites
  • 3 weeks later...
Posted

Ok so after all this trouble shooting I still can't get it to boot I got a new gpu, psu, and ram and still get a blank screen saying no signal help I'm desprate

 

Your motherboard has integrated graphics on the North Bridge. You will need an S-VGA cable or appropriate converter. Pull the GPU, plug the monitor into the S-VGA port on the motherboard i/o panel, enable the on-board graphics in the BIOS and hopefully you'll see something on the montior.

80+ ratings certify electrical efficiency. Not quality.

 

Link to comment
https://linustechtips.com/topic/85340-still-no-boot/#findComment-1264406
Share on other sites
Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing Troubleshooting

×