USB connectors

[LickyLickyBumBum]

So the Asrock AB350 PRO4 motherboard (the ATX one, not the mATX one) has USB 2.0 and USB 3.1 on it and 2 connectors on the bottom: USB 1_2 and 3_4. My case (NZXT s340) has 2 front USB 3.0 connectors and the blue cable that plugs in the USB 3.0 header on the motherboard. Does the AB350 PRO4 have the connector or will my front 3.0 connectors stay useless without an expansion card to solve the issue? Are the USB 1_2 and 3_4 connectors for USB 2.0 or the 3.1?

[mariushm]

 

USB 3 header  (1 x 2 ports) below the 24 pin ATX connector <- you put the blue cable for the USB 3 ports on the front panel of the case there.

USB 2 headers ( 2 x 2 ports)  at the bottom of the board, in direct line with the battery.  Either plug cable from case (front panel) or use brackets to create more ports on the back of the case. 

 

 

 

[LickyLickyBumBum]

12 minutes ago, Alexsolo said:

This information should be in the motherboard manual 

 

The USB on the back of the motherboard are already connected, so no need for them to occupy a plug on the MOBO

I think the two USB's at the bottom are 2.0, and the one on the right side is the USB 3.0 per usual.

 

USB 3.1 Doesn't need external connections onto the board, they're already soldered on.

From the picture I cannot see the USB 3.0 blue connector like in the picture.

[LickyLickyBumBum]

Just now, Alexsolo said:

It's right under the 24pin power connector.

Thank you
ASRock should invest in >2MP photos...