GPU overclocking

[BrokenProgram01]

I'm currently running a GTX 780 and when I went and booted up GPU-Z today I noticed when I was running valley benchmark that my TDP was hovering between 85-90% even though my power limit is at 110% but performance cap section it was saying that power was the limiting factor I am pretty sure it isn't my PSU though (I could always be wrong) so what else could be causing the problem

 

GPU ASUS GTX 780 DirectCUII

PSU: Corsair CX-650 2017 edition

[Billy_Mays]

Its an Asus thing dont worry about it since Asus was an As(u)s with the 700 series 

[BrokenProgram01]

1 minute ago, Billy_Mays said:

Its an Asus thing dont worry about it since Asus was an As(u)s with the 700 series 

Lol ok but is the usual limit for a GTX 780 1100MHz base on core?

[Billy_Mays]

Just now, BrokenProgram01 said:

Lol ok but is the usual limit for a GTX 780 1100MHz on core?

Is that the max the slider can go?

[BrokenProgram01]

1 minute ago, Billy_Mays said:

Is that the max the slider can go?

No not even close but even increasing voltage doesn't do much( I'm using MSI afterburner)

[Billy_Mays]

5 minutes ago, BrokenProgram01 said:

No not even close but even increasing voltage doesn't do much( I'm using MSI afterburner)

Its an Asus card problem so dont worry about it 

[BrokenProgram01]

1 minute ago, Billy_Mays said:

Its an Asus card problem so dont worry about it 

So blame everything on ASUS lol

[Billy_Mays]

Just now, BrokenProgram01 said:

So blame everything on ASUS lol

Look up on google Asus 700 series overclocking issues

[Lord Nicoll]

18 minutes ago, BrokenProgram01 said:

No not even close but even increasing voltage doesn't do much( I'm using MSI afterburner)

Use GPU tweak from ASUS, there are sometimes settings that they enabled for their own cards and software's together, however if you really really want to get as much out of the card as you possibly can, you'll need to do some BIOS modding [kinda dangerous] and some soldering on the graphics card itself [that can also be pretty dangerous] 

[Mick Naughty]

If it was your psu, your pc wouldn't be running. I don't care much for gpu tweak. Prefer precision x. 

 

I turn power to the max along with voltage. Then oc till i artifact. I flashed the bios on all my Kepler cards though. 

[BrokenProgram01]

On 9/6/2017 at 8:05 PM, Lord Nicoll said:

Use GPU tweak from ASUS, there are sometimes settings that they enabled for their own cards and software's together, however if you really really want to get as much out of the card as you possibly can, you'll need to do some BIOS modding [kinda dangerous] and some soldering on the graphics card itself [that can also be pretty dangerous] 

 

On 9/6/2017 at 9:26 PM, Mick Naughty said:

If it was your psu, your pc wouldn't be running. I don't care much for gpu tweak. Prefer precision x. 

 

I turn power to the max along with voltage. Then oc till i artifact. I flashed the bios on all my Kepler cards though. 

Do you guys know some good roms that would work with my 780?

[Lord Nicoll]

59 minutes ago, BrokenProgram01 said:

 

Do you guys know some good roms that would work with my 780?

You generally make your own using the BIOS on your card, us GPUz to backup and get a copy of the one on the card, use a bios editor to edit it (something like Kepler Bios Editor) then us nvflash to flash the edited bios on.