Cpu 95c problem , help

[Anas Dweik]

Hi guys.

 

i have h110i , i5 6600k and powercolor r9 390x devil 

my cpu idle  was 32/30c

my cpu normal temperature was 50c on battleground for example  

I was organizing my pc cables and fans ... etc like a normal person .

I changed my thermal paste before 2 month "mx-4"

after i finished organizing my cables thats happned.

 

gpu 50c idle , load 80c on battleground

cpu idle 50/55c idle 

cpu load 90/100c on battleground

i restart my PC 

gpu works good 32c idle , 55c load

cpu still same problem 50/55c idel , load 100/90c 

 

I have no idea what's the problem is . 

any help ?

 

 

 

[W-L]

5 minutes ago, Anas Dweik said:

-SNIP-

Check your pump RPM's to ensure it is running and the pump hasn't died. If it's alright try remounting it with the high idle temps it's very possible a lack of mounting pressure.

[gbergeron]

6 minutes ago, Anas Dweik said:

Hi guys.

 

i have h110i , i5 6600k and powercolor r9 390x devil 

my cpu idle  was 32/30c

my cpu normal temperature was 50c on battleground for example  

I was organizing my pc cables and fans ... etc like a normal person .

I changed my thermal paste before 2 month "mx-4"

after i finished organizing my cables thats happned.

 

gpu 50c idle , load 80c on battleground

cpu idle 50/55c idle 

cpu load 90/100c on battleground

i restart my PC 

gpu works good 32c idle , 55c load

cpu still same problem 50/55c idel , load 100/90c 

 

I have no idea what's the problem is . 

any help ?

 

 

 

Is it overclocked ?

Probably heatsink badly seated.

Take if off wash re-appy thermal paste, reseat heatsink bla bla bla

[KeFy]

Try to re-install the cooler it could be that it is not seated properly

[Master Disaster]

Before you star dismantling anything make sure your pump is plugged in to power and is running and that both fans are spinning.

[Anas Dweik]

2 minutes ago, RandomGuy13 said:

What thermal paste did you use?

Did you properly clean the old paste off first with Isopropyl alcohol?

Do you know how to correctly apply thermal paste?

no , i changed it before 2 month 

[Anas Dweik]

2 minutes ago, Master Disaster said:

Before you star dismantling anything make sure your pump is plugged in to power and is running and that both fans are spinning.

they are plugged in and fans spinning well 

[gbergeron]

Just now, Anas Dweik said:

no , i changed it before 2 month 

I suggest watch youtube on how to apply thermal paste and also maybe a tutorial on how to install your specific heatsink.

Could help. Even the best sometimes, with new hardware or heatsink etc can still need some help  

[Anas Dweik]

4 minutes ago, KeFy said:

Try to re-install the cooler it could be that it is not seated properly

okay i will try

[Anas Dweik]

Just now, gbergeron said:

I suggest watch youtube on how to apply thermal paste and also maybe a tutorial on how to install your specific heatsink.

Could help. Even the best sometimes, with new hardware or heatsink etc can still need some help  

its not the first time i install my cpu cooler , i am sure there is no problem in installing the cooler , i will try to reapply my thermal paste

[Anas Dweik]

6 minutes ago, gbergeron said:

Is it overclocked ?

Probably heatsink badly seated.

Take if off wash re-appy thermal paste, reseat heatsink bla bla bla

okay i will try it now 

[gbergeron]

Just now, Anas Dweik said:

its not the first time i install my cpu cooler , i am sure there is no problem in installing the cooler , i will try to reapply my thermal paste

Usually there are not like 10 things related to 100c cpu : Fan not plugged, no power, pump not working, no thermal paste, heatsink badly seated.

I don't see other things to verify but other people here maybe can help better

[Anas Dweik]

6 minutes ago, RandomGuy13 said:

What thermal paste did you use?

Did you properly clean the old paste off first with Isopropyl alcohol?

Do you know how to correctly apply thermal paste?

mx-4 , 70% alcohol , i do know how to apply thermal paste

[gbergeron]

2 minutes ago, Anas Dweik said:

mx-4 , 70% alcohol , i do know how to apply thermal paste

My friend had same issue, and even after he told me 10 times he know how to install the heatsink, I figured out there was 1 clip missing and due to that, bad contact, he was getting 100c temp.

Not saying its ur case, but first thing to do wud be like other said, verify fans, pump, take heatsink off, wash, apply thermal paste, reseat , verify temps after and let us know  

GL buddy

[Anas Dweik]

1 minute ago, gbergeron said:

Usually there are not like 10 things related to 100c cpu : Fan not plugged, no power, pump not working, no thermal paste, heatsink badly seated.

I don't see other things to verify but other people here maybe can help better

1- fans plugged they are spinning behind me

2- idk what do u mean in no power 

3- i have no pump its h110i from corsiar  locked water cooling 

4- i changed thermal paste before 2 month "MX-4"

5- i will try to reinstall the heatsink

 

[Anas Dweik]

1 minute ago, gbergeron said:

My friend had same issue, and even after he told me 10 times he know how to install the heatsink, I figured out there was 1 clip missing and due to that, bad contact, he was getting 100c temp.

Not saying its ur case, but first thing to do wud be like other said, verify fans, pump, take heatsink off, wash, apply thermal paste, reseat , verify temps after and let us know  

GL buddy

i will try to do it right now

[Anas Dweik]

27 minutes ago, gbergeron said:

My friend had same issue, and even after he told me 10 times he know how to install the heatsink, I figured out there was 1 clip missing and due to that, bad contact, he was getting 100c temp.

Not saying its ur case, but first thing to do wud be like other said, verify fans, pump, take heatsink off, wash, apply thermal paste, reseat , verify temps after and let us know  

GL buddy

Still same problem

[Anas Dweik]

Any help ?

 

[W-L]

2 hours ago, Anas Dweik said:

Any help ?

 

The pump is running and everything is functional? 

 

If so do you notice the mount loose at all, you might want to consider looking into the washer mod by adding some rubber orings.

http://www.overclock.net/t/1465656/concerns-about-newly-installed-corsair-h100i