High temp in water cooling loop

[System Shock]

Hello everyone!

I have a custom built loop in View 27 case with blocks on Ryzen 1700 (now in stock) and on GTX970 (OC to 1550/1950) and im getting kinda strange temps - GPU in Furmark burn in can reach up to 58 celsius and CPU is about 40. I believe its a bit high for such a setup. What might be the problem? Ambient t -26 celsius.

 

Loop specs:
Rad - Barrow 360 Dabel-a (12 channels, 13FPI, 34mm thick (body - 28mm)
CPU block - EKWB Supremacy EVO
GPU block - Bykski
Fans - Tt Riing Premium 12 (Push on front) x3 - 1400RPM

[Damascus]

Considering that I get about 48c on my stock ryzen and 53c 1070 with my 240mm rad thats not too shabby.  I have waaay better fans though so that may be why.

[System Shock]

Just now, thom derksen said:

Do you live on the North Pole?

It's hyphen.

[System Shock]

Just now, Damascus said:

Considering that I get about 48c on my stock ryzen and 53c 1070 with my 240mm rad thats not too shabby.  I have waaay better fans though so that may be why.

Well, that RGB thing got me. Maybe add some slim fans? Or 1 more 120 section? Since i'm planning to uprgarde to 1080.

[Damascus]

1 minute ago, System Shock said:

Well, that RGB thing got me. Maybe add some slim fans? Or 1 more 120 section? Since i'm planning to uprgarde to 1080.

Nah, you won't see a big enough change for it to be worth it.

 

Unless those aren't the radiator/static pressure optimized ones and if that's the case it may be worth it. 

[System Shock]

Just now, Damascus said:

Nah, you won't see a big enough change for it to be worth it.

 

Unless those aren't the radiator/static pressure optimized ones and if that's the case it may be worth it. 

Maybe get a better rad? Something like HWlabs GTS360 + GTS 120. I heard it's awesome performer in push-only with 800-1300 RPM fans. And do you know any good RGB fans for rads?

[Damascus]

51 minutes ago, System Shock said:

Maybe get a better rad? Something like HWlabs GTS360 + GTS 120. I heard it's awesome performer in push-only with 800-1300 RPM fans. And do you know any good RGB fans for rads?

I have the GTS240 Xflow with gentle typhoons (poor fans are choked with 5mm or less of breathing room) so yeah its pretty beast.

[Mick Naughty]

Fans, little rad, airflow in that case. Just to name a few. Did you flip the psu up so its helps extract air?

[System Shock]

15 hours ago, Mick Naughty said:

Fans, little rad, airflow in that case. Just to name a few. Did you flip the psu up so its helps extract air?

360 rad is not enough for Ryzen 1700 and 970? PSU is under shroud, so it wont help. Can you recommend smth in my case? New rad or dans?

[Mick Naughty]

6 minutes ago, System Shock said:

360 rad is not enough for Ryzen 1700 and 970? PSU is under shroud, so it wont help. Can you recommend smth in my case? New rad or dans?

It's plenty of rad but you can't complain about temps. The psu is under the shroud but so it the rad, the bottom fan blow directly to the psu. You have 3 intake fans and only one exhaust. Thus flipping the psu around would help exhaust. I have the same case and did the same thing. I swapped from a thin rad to 60m rad. Helped a bit but I did it mainly for airfow. There isn't much you can do aside from getting quality fans. 

[System Shock]

9 minutes ago, Mick Naughty said:

It's plenty of rad but you can't complain about temps. The psu is under the shroud but so it the rad, the bottom fan blow directly to the psu. You have 3 intake fans and only one exhaust. Thus flipping the psu around would help exhaust. I have the same case and did the same thing. I swapped from a thin rad to 60m rad. Helped a bit but I did it mainly for airfow. There isn't much you can do aside from getting quality fans. 

Oh, thanks. Will try to flip the PSU. And what about exchanging rad for HWlabs GTS? Or adding one more 120 slim rad?

 

And how did you managed to fit a 60mm rad there? It.s only 7.5cm space...

[Mick Naughty]

I wouldn't add another rad myself but I prefer the clean look off how I ran the tubing, especially compared to my other rig. 

 

I put the fans on the outside. I'm gonna cut the inside and bend ornate slightly so I can put the fans on the inside like normal. But I've modded the case a bit which I kinda regret now.