New pc help

[Eiimer]

Hi, i just finished my first pc build and turned it on to test it, it doesnt show anything on the screen and also it doesnt want to recognize my keyboard or mouse (they dont even turn on), but everything is turned on, the case/cpu fans are spinning and the mobo has lights turned on, gpu fans are not spinning but the gpu has a white light, i dont know what to do.

[Gungpae]

By first PC you mean this one?

https://linustechtips.com/main/topic/788577-first-pc-build/

Quote

Cpu: Ryzen 5 1500x (I picked it on offer in the place i live)

Mobo: Asus prime b350m-a

Case: Aerocool xpredator x1

Graphics: Rx 580 (8gb) or gtx 1060 (6gb)

Ram: Corsair vengeance lpx 2x4gb 2400mhz or any other

Psu: Unknown (I highly preffer a good quality one)

Storage: WD Blue 1tb hdd (maybe replace it for an ssd)

 

[Eiimer]

1 minute ago, Gungpae said:

By first PC you mean this one?

https://linustechtips.com/main/topic/788577-first-pc-build/

 

Yeah that one

[Gungpae]

1 minute ago, Eiimer said:

Yeah that one

What power supply did you end up going with? Also what GPU did you end up with? And if possible have a picture of the insides.

[Eiimer]

1 minute ago, Gungpae said:

What power supply did you end up going with? Also what GPU did you end up with? And if possible have a picture of the insides.

Power supply: evga 500w bronze 80+ 

Gpu: asus dual 1060 6gb

the cable management is trash but im pretty sure everything is where it should go, also i have one green/white cable unplugged because idk what im supposed to plug there

[Gungpae]

4 minutes ago, Eiimer said:

Power supply: evga 500w bronze 80+ 

Gpu: asus dual 1060 6gb

the cable management is trash but im pretty sure everything is where it should go, also i have one green/white cable unplugged because idk what im supposed to plug there

Your CPU power supply connection doesn't look like it's pushed in all the way. Maybe try re-seating it.

[Eiimer]

11 minutes ago, Gungpae said:

Your CPU power supply connection doesn't look like it's pushed in all the way. Maybe try re-seating it.

Tried it and its still the same as before

[Eiimer]

This is how it looks like when its on

[Gungpae]

Just now, Eiimer said:

This is how it looks like when its on

Where's your monitor plugged into? (should be plugged into your gpu)

[Eiimer]

1 minute ago, Gungpae said:

Where's your monitor plugged into? (should be plugged into your gpu)

Its on the gpu, already plugged in both hdmi ports and nothing

[Gungpae]

Just now, Eiimer said:

Its on the gpu, already plugged in both hdmi ports and nothing

Remove 1 RAM stick and try turning it on. If that doesn't work try a different slot.

[Eiimer]

12 minutes ago, Gungpae said:

Remove 1 RAM stick and try turning it on. If that doesn't work try a different slot.

Done and still the same

[Gungpae]

5 minutes ago, Eiimer said:

Done and still the same

Clear the CMOS

 

http://dlcdnet.asus.com/pub/ASUS/mb/SocketAM4/PRIME_B350M-A/E12357_PRIME_B350M-A_UM_WEB_20170712.pdf

 

#7 Page 12

[Eiimer]

8 minutes ago, Gungpae said:

Clear the CMOS

 

http://dlcdnet.asus.com/pub/ASUS/mb/SocketAM4/PRIME_B350M-A/E12357_PRIME_B350M-A_UM_WEB_20170712.pdf

 

#7 Page 12

Found the cmos but idk what it means by short the two pins

[Gungpae]

3 minutes ago, Eiimer said:

Found the cmos but idk what it means by short the two pins

Stick a screwdriver in between the two pins (connecting the pins shorting them out)

[Eiimer]

14 minutes ago, Gungpae said:

Stick a screwdriver in between the two pins (connecting the pins shorting them out)

Damn man thanks a lot!!!! It worked younare the best

[Eiimer]

1 minute ago, Eiimer said:

Damn man thanks a lot!!!! It worked younare the best

Wait, it doesnt want to recognize a ram stick, what should i do?

[Gungpae]

18 minutes ago, Eiimer said:

Wait, it doesnt want to recognize a ram stick, what should i do?

update the bios

[Eiimer]

21 minutes ago, Gungpae said:

update the bios

Oh i put the stick wrong, i plugged it in again and it recognized it but thanks a lot for the help

[Gungpae]

6 minutes ago, Eiimer said:

Oh i put the stick wrong, i plugged it in again and it recognized it but thanks a lot for the help

You want to update your bios anyways to improve memory compatibility and system reliability.