Jump to content

Mouse feels slower at same dpi as before

Since few days I feel like my mouse (Logitech g403) is slower at the same dpi (for eg 1600) as it was before.
I found out that if I switch usb ports or use surface tuning in the Logitech gaming software it gets back to its original sensitivity at that dpi(1600) but only for a short period of time, after that it becomes slow again.

If I need to get it back to that same sensitivity as before I have to increase the dpi from 1600 to 2000 to get same sensitivity feel.


I am not sure what's happening! 

Is something wrong with the mouse lens?

My Build:
 CPU - i7-4790k @ 4.7ghz (overclocked) at 1.328v
 Ram - 16GB Corsair Vengeance DDR3 (overclocked)
 Motherboard - Asus Republic Of Gamers (ROG) Maximus VII Hero
 Cpu Cooler - Corsair H100i GTX Liquid cooler, Noctua NH-D15 Air cooler
 Case - Cooler Master MasterCase Pro 5
 PSU - Corsair Rm1000 Gold Certified
 SSD - Samsung 850pro 256GB SSD
 HDD - 1x WD Black 4TB/256mb cache, 2x Seagate Barracuda 2TB HDD
 GPU - Zotac Gtx 1080Ti Amp! Extreme! edition
 Keyboard - HyperX Alloy mechanical_Cherry-MX RED (main) , Asus Cerberus (secondary)
 Mouse - Logitech G403 Prodigy (Main) , Razer Deathadder 2013(secondary), Logitech m235 wireless mouse (secondary)
 Mouse pad - Razer Gigantus (Main) CM-Storm Swift-RX (secondary), Steelseries Qck (secondary)
 Mic - Blue Snowball ICE
 Headphones - HyperX Cloud Core
 Monitor - Acer Predator XB271HU 2560x1440 144hz Gsync (Main), Dell S2216H 1920x1080 60hz (secondary)

Link to comment
Share on other sites

Link to post
Share on other sites

Did you change the sensitivity in Windows/Games?

✨PC Specs✨

AMD Ryzen 7 3800X | MSI MPG B550 Gaming Plus | 16GB Team T-Force 3400MHz | Zotac GTX 1080 AMP EXTREME

BeQuiet Dark Rock Pro 4 Samsung 850 EVO 250GB | NZXT 750W | Phanteks Eclipse P400A

Extras: ASUS Zephyrus G14 (2021) | OnePlus 7 Pro | Fully restored Robosapien V2, Omnibot 2000, Omnibot 5402

Link to comment
Share on other sites

Link to post
Share on other sites

8 minutes ago, ShadowTechXTS said:

Did you change the sensitivity in Windows/Games?

sensitivity is same in the game.
But I did turned off the acceleration in "ease of access center > make mouse easier to use > setup mouse keys > acceleration option under pointer speed".

My Build:
 CPU - i7-4790k @ 4.7ghz (overclocked) at 1.328v
 Ram - 16GB Corsair Vengeance DDR3 (overclocked)
 Motherboard - Asus Republic Of Gamers (ROG) Maximus VII Hero
 Cpu Cooler - Corsair H100i GTX Liquid cooler, Noctua NH-D15 Air cooler
 Case - Cooler Master MasterCase Pro 5
 PSU - Corsair Rm1000 Gold Certified
 SSD - Samsung 850pro 256GB SSD
 HDD - 1x WD Black 4TB/256mb cache, 2x Seagate Barracuda 2TB HDD
 GPU - Zotac Gtx 1080Ti Amp! Extreme! edition
 Keyboard - HyperX Alloy mechanical_Cherry-MX RED (main) , Asus Cerberus (secondary)
 Mouse - Logitech G403 Prodigy (Main) , Razer Deathadder 2013(secondary), Logitech m235 wireless mouse (secondary)
 Mouse pad - Razer Gigantus (Main) CM-Storm Swift-RX (secondary), Steelseries Qck (secondary)
 Mic - Blue Snowball ICE
 Headphones - HyperX Cloud Core
 Monitor - Acer Predator XB271HU 2560x1440 144hz Gsync (Main), Dell S2216H 1920x1080 60hz (secondary)

Link to comment
Share on other sites

Link to post
Share on other sites

3 minutes ago, Sanchit_technogeek said:

sensitivity is same in the game.
But I did turned off the acceleration in "ease of access center > make mouse easier to use > setup mouse keys > acceleration option under pointer speed".
 

That could be it.

✨PC Specs✨

AMD Ryzen 7 3800X | MSI MPG B550 Gaming Plus | 16GB Team T-Force 3400MHz | Zotac GTX 1080 AMP EXTREME

BeQuiet Dark Rock Pro 4 Samsung 850 EVO 250GB | NZXT 750W | Phanteks Eclipse P400A

Extras: ASUS Zephyrus G14 (2021) | OnePlus 7 Pro | Fully restored Robosapien V2, Omnibot 2000, Omnibot 5402

Link to comment
Share on other sites

Link to post
Share on other sites

Just now, ShadowTechXTS said:

That could be it.

Even after that I felt only a minor change but not this much, and it does gets back to the original sensitivity if I surface tune the mouse or change the usb port but the change lasts for like a minute or so then it becomes slow again.

My Build:
 CPU - i7-4790k @ 4.7ghz (overclocked) at 1.328v
 Ram - 16GB Corsair Vengeance DDR3 (overclocked)
 Motherboard - Asus Republic Of Gamers (ROG) Maximus VII Hero
 Cpu Cooler - Corsair H100i GTX Liquid cooler, Noctua NH-D15 Air cooler
 Case - Cooler Master MasterCase Pro 5
 PSU - Corsair Rm1000 Gold Certified
 SSD - Samsung 850pro 256GB SSD
 HDD - 1x WD Black 4TB/256mb cache, 2x Seagate Barracuda 2TB HDD
 GPU - Zotac Gtx 1080Ti Amp! Extreme! edition
 Keyboard - HyperX Alloy mechanical_Cherry-MX RED (main) , Asus Cerberus (secondary)
 Mouse - Logitech G403 Prodigy (Main) , Razer Deathadder 2013(secondary), Logitech m235 wireless mouse (secondary)
 Mouse pad - Razer Gigantus (Main) CM-Storm Swift-RX (secondary), Steelseries Qck (secondary)
 Mic - Blue Snowball ICE
 Headphones - HyperX Cloud Core
 Monitor - Acer Predator XB271HU 2560x1440 144hz Gsync (Main), Dell S2216H 1920x1080 60hz (secondary)

Link to comment
Share on other sites

Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

×